PDA

View Full Version : Does anyone install white vinyl fences?



spleify
06-26-2013, 10:37
I am looking for someone who can help me install a white vinyl fence in our yard(yeah I know they suck but thats all the HOA allows). The back and one side of the yard is done by neighbors already so I only have one section that is maybe 25' and one section that might be 40' and that needs a gate in it.

Please hit me up if this is something you do or have done or can help me with.

Thanks

tmckay2
06-26-2013, 10:58
ironically i need the same thing and am unsure how to go about it. ours is one of those 5 foot tall ones with four horizontal beams. i don't even know where you get them. our lot has it on two sides and you have to use that type for the neighborhood. would love it if someone i can trust does it.

JohnTRourke
06-26-2013, 11:53
it isn't rocket science (and they do suck)
if you can dig a hole and run a level you can install a fence
dig hole for post, get it to right height, install the loose section (they come in pre-cut lengths or for an oddball you just cut them with a hacksaw) and slide it in, set post to level and done
seriously pretty simple, the hard part is digging the hole.

home depot, lowes, etc should all have the parts

http://www.lowes.com/cd_Install+a+Vinyl+Fencespan_338022695_

http://www.ehow.com/how_5676029_install-white-vinyl-fencing.html

tmckay2
06-26-2013, 11:56
you CAN do it yes. i have put in a few fences, especially when i was a kid on the farm. but it sucks, and id rather someone else do it and do it right. i don't have the time or energy to put it in and frankly i hate digging holes for fences. they are a bitch.


it isn't rocket science (and they do suck)
if you can dig a hole and run a level you can install a fence
dig hole for post, get it to right height, install the loose section (they come in pre-cut lengths or for an oddball you just cut them with a hacksaw) and slide it in, set post to level and done
seriously pretty simple, the hard part is digging the hole.

home depot, lowes, etc should all have the parts

http://www.lowes.com/cd_Install+a+Vinyl+Fencespan_338022695_

http://www.ehow.com/how_5676029_install-white-vinyl-fencing.html

Steps
06-26-2013, 12:37
Rent a tractor with an Auger. 00Tec and I put in over 300' of fence on my property and the Post Holes were the easiest part!

spleify
06-26-2013, 13:03
Thanks. I know I can do it that's not the question I asked. I want to pay a COAR member to help me with it. Trying to Help someone out who could maybe use a couple extra bucks

sniper7
06-26-2013, 13:24
I can see if my buddy wants to make some extra money, what days you thinking?

Colorado_Outback
06-26-2013, 17:26
Sorry I'm no help either but heres a free bump.

And a pic of what happens when they get too warm..
http://farm4.staticflickr.com/3747/9145621983_c6fcfc5bcc_c.jpg

Irving
06-26-2013, 21:02
Yikes, you better hope the HOA doesn't allow forest fires.

newracer
06-26-2013, 21:20
Can you upgrade as long as it looks the same?

spleify
06-26-2013, 23:16
I am looking to do it some time in July no real set time.

I dont think I can substitute it for anything else it needs to be the crappy vinyl stuff