PDA

View Full Version : I need large Orings today


spittoon
07-07-2013, 10:28
Does any body know were i can get large O ring's Today 2" x 7/32 ...1 3/4x 7/32 working on the tractors hydro .I made the mistake of ripping it down on the drive way the wife is smoking mad[panic].I do not under stand why i cleaned the oil up any advice thanks.
cofi
07-07-2013, 10:31
Grainger???
Colorado_Outback
07-07-2013, 10:34
Big R.. Maybe..
spittoon
07-07-2013, 10:44
Grainger ,CLOSED BIG R NOTHIN THAT BIG
BPTactical
07-07-2013, 10:45
Ace or Napa
DFBrews
07-07-2013, 10:55
Just looked at work nothing that big
RonMexico
07-07-2013, 11:05
My car uses about a 3" o ring for the oil filter( european canister type); my guess is to go to an autoparts store and start opening up oil filter boxes until you find one or just ask one of the employees.
Wulf202
07-07-2013, 11:09
tractor supply? napa?
jslo
07-07-2013, 11:34
Ace is the place
spittoon
07-07-2013, 11:50
Ace not the same dia they have 3/16th,,, tractor supply to far south ,,,Napa no
Daniel_187
07-07-2013, 12:35
Your too far but McGuckin's in Boulder, I got some really big orings for a project I was working on. They have rubber and Viton
spittoon
07-07-2013, 14:22
Your too far but McGuckin's in Boulder, I got some really big orings for a project I was working on. They have rubber and Viton

Gave them a call but 3/16th max dia thank for the info monday rocket seals should have them any ways it started raining thanks for all of you help
XJ
07-07-2013, 17:49
In the future, you can get a kit for making O-rings. Of course this isn't going to be as good as the proper part, but much easier to find on a Sunday afternoon if it is already sitting on the garage shelf.

Grainger has them too, but their website is down so I can't link.

http://images2.mcmaster.com/Contents/gfx/large/9694kp2l.png?ver=33911906

http://www.mcmaster.com/#o-rings/=niv5pr
DSB OUTDOORS
07-07-2013, 17:58
I checked my supply at work today, sorry brother. No such luck.
BuffCyclist
07-07-2013, 18:39
Not that I can help you out, but when I read the title of the thread, I thought you were asking for "Large Onion Rings"...



Perhaps I'm hungrier than I thought.


My go to for all parts is McMaster-Carr. We always overnight parts for work, but I've never seen the shipping charges. You might be able to get a better shipping quote ahead of time if you called them to place the order.
Zach O
07-07-2013, 20:27
It's not close, but Whistler Bearing in Co Springs should have them.
GilpinGuy
07-07-2013, 21:41
Try Drive Train Industries in Denver.

http://www.drivetrainindustries.com/
O2HeN2
07-07-2013, 23:38
Do you have a Parker store (http://www.parker.com/portal/site/PARKER/menuitem.14ecfc66e7a40c1af8500f199420d1ca/?vgnextoid=43cb5242ade5c110VgnVCM10000032a71dacRCR D&vgnextfmt=EN&Keyword=O-Rings&wtky=O-Rings) near you?

O2
dirtrulz
07-08-2013, 07:03
Rocket seals would be my bet, if nothing else they have bulk material and can make one for you. I have walked away form there without what I wanted maybe 1 percent of the time. All they do is orings and seals.
Skully
07-08-2013, 09:46
Not that I can help you out, but when I read the title of the thread, I thought you were asking for "Large Onion Rings"...



Perhaps I'm hungrier than I thought.



You were not the only one Buff!

I the same when I first saw this thread on my phone, words small enough and mis-read as "Large Onion Rings", I was about ready to reply but realized last minute and saved face.

[ROFL1][ROFL2]

I still love Good Times Onion Rings,

...............have no clues were to get Large O-rings.