What is the diameter of 16gal keg?

[Lurch]

May need one for a project but the diameter has to be right.

[Kraven251]

They really don't make that good of artillery shells

[Rabid]

About 16" wide and about 50.25" in circumference at the widest point

[crays]

About 50.25"

Sounds more like circumference?


Sent via my Mobile Work Avoidance Device

[crays]

If so that puts it -16 in.

Sent via my Mobile Work Avoidance Device

[newracer]

http://www.micromatic.com/images/articles/11/Kegs-new.jpg

[Drucker]

Dang that made me think of Pi, now I am hungry and thirsty


Sent from NSA approved device WTF812/Z

[Whistler]

Keg dimensions are not standardized

[Rabid]

If so that puts it -16 in.

Sent via my Mobile Work Avoidance Device
Your right, i had a brain fart.

[Rabid]

Keg dimensions are not standardized
True but they are not too far off from each other. An import keg i have is 15.75" and a short keg that is a hair under 17".

[Lurch]

Thanks guys.

Anyone have a half barrel that is 16" that would sell, empty of course.

[Rabid]

What are you going to use it for? If your going to cut it up try calling distributors to see if they have any they retired.

[Lurch]

I will give that a try.

[ScooterCO]

So, nobody asked. I will. What are you going to do with it?

[Lurch]

So, nobody asked. I will. What are you going to do with it?

Need to extend the liner on a fresh water spring up at the family cabin and the existing liner in 16" in diameter. Figured a keg would be cheaper then a piece of SS or alum.

[EvilRhino]

The thing I found when I got the kegerator is that the different brands run different sizes. The bud family runs straight ones like the ones pictures. Whoever makes Michelob has a bulge in the middle ring.

[jslo]

If still needed I've got one roughly 16 x 24

[Lurch]

If still needed I've got one roughly 16 x 24

PM sent

[jslo]

31953
This is what I have