Owners of cans with 51t mounts

[kwando]

I need your input, never seen up close how the cans mount to the FH/brake, just what's on YouTube.

Here is my setup, 11.5" barrel with a 11" Troy rail. At first the rail extended past the teeth of the brakeout, I know that was a definite no-no. So I chopped a little bit off the front of the rail, was wonder if you thought this would work. Or if you had a can to test fit it on, still waiting on my stamp for the SBR and the cans from Double D.

Any help is appreciated.

Before:

http://i96.photobucket.com/albums/l166/kwando90/null_zps6a260a5e.jpg

After:

http://i96.photobucket.com/albums/l166/kwando90/null_zpsb7c38a36.jpg

[brutal]

Tracking thread.

I don't have a definitive answer, but based on the location of the ratchet release, images of both the backside of the can sans mount and other images, throw in some guestimation and I think you'll be fine there. I think it extends to about the mid point of the 22mm flat.

Have you watched this video? Skip through the first 2 minutes, then pay attention around 3:00 and again around 4:00.

https://www.silencershop.com/shop/aac-762-sdn-6

[DeusExMachina]

Yeah, that looks about right. The ratchet release is right on the teeth. It's going to depend on the can, but my Mini4 has maybe .25" behind the ratchet so what you have there would clear my can.