Anyone Here Do Custom Exhaust Work?

[T-Giv]

I have been using a local exhaust shop for all of my stuff and I have tried doing it myself. I guess I just don't do it often enough to be good at it. Does someone on here own or work at a shop? I have a new setup I need finished on my Tahoe. Pretty basic but if I can support someone on here I would prefer to do that!

[hghclsswhitetrsh]

Maybe lpgasman?

[KS63]

What exactly needs done?

[T-Giv]

I have two new mufflers that need to get welded in. I also need the old muffler cut out. I have cut out all of the rear section after the muffler (true duals). Once the new mufflers are welded I need two 3" pipes run about 4' to a side exit in front of the rear axle.

[Colorado_Outback]

I can do that, but it will be a trek for you..

Just did a little side pipe for the red car..
35401
35403

[kawiracer14]

I had my last truck get fixed here: http://www.budsmuffler.com/

He does good work and seemed reasonably priced.

[killianak9]

Bdm performance exhaust 504 Knox ct in Denver 303 922 5280 , ask for Brian. He did a complete exhaust turbo back on my powerstroke. Great work and affordable


Sent from my iPhone using Tapatalk - now Free (http://tapatalk.com/m?id=1)

[T-Giv]

[QUOTE=Colorado_Outback;1379817]I can do that, but it will be a trek for you..

Do you have a pipe expander? My piping coming into the muffler is only 2.25 inch so it will have to be expanded and then where have you been buying your pipe? It is a trek but I actually have to head down there in two weeks so maybe we could utilize your skills!

I have used Bud's in the past and I was pleased with the welds they were pricey at the time. I have also heard good things about that performance shop too, especially for the diesel crowd. I always appreciate good recommendations however the idea here is that I wanted to personally support a fellow member of the forum.

[Colorado_Outback]

[QUOTE=Colorado_Outback;1379817]I can do that, but it will be a trek for you..

Do you have a pipe expander? My piping coming into the muffler is only 2.25 inch so it will have to be expanded and then where have you been buying your pipe? It is a trek but I actually have to head down there in two weeks so maybe we could utilize your skills!

I have used Bud's in the past and I was pleased with the welds they were pricey at the time. I have also heard good things about that performance shop too, especially for the diesel crowd. I always appreciate good recommendations however the idea here is that I wanted to personally support a fellow member of the forum.

Negative on the expander, you can get up/down sizers pretty easy. That's what I did with the red car, its got a 2.25 down pipe into an up sizer to a 2.5" muffler and rear section.

I get lengths of exhaust tube from a shop here in town and mandrels from another shop (better price than shop #1)

Is your Tahoe lifted? My garage is short..

EDIT:

You can see the up/down sizer in this pic..
35407

[T-Giv]

[QUOTE=T-Giv;1380155]

Negative on the expander, you can get up/down sizers pretty easy. That's what I did with the red car, its got a 2.25 down pipe into an up sizer to a 2.5" muffler and rear section.

I get lengths of exhaust tube from a shop here in town and mandrels from another shop (better price than shop #1)

Is your Tahoe lifted? My garage is short..

EDIT:

You can see the up/down sizer in this pic..
35407

My Tahoe is not lifted so jacking up in a standard garage should be fine. I am going to get an estimate from the local source and see what they will do it for. After that I'll get with you on a PM and see what we can work out.

Thanks for the offer dude!

[Colorado_Outback]

[QUOTE=Colorado_Outback;1380179]

My Tahoe is not lifted so jacking up in a standard garage should be fine. I am going to get an estimate from the local source and see what they will do it for. After that I'll get with you on a PM and see what we can work out.

Thanks for the offer dude!

No problem.

Hit me up, ill be around.