Coolest Lower Receiver logo/markings?

[osok-308]

So I'm looking to assemble a new AR-15 in the future and I am looking into different lower receivers. I've put a couple basic ARs together before, but now I want to put together a better AR. And if I'm going to put together an awesome rifle, it starts with an awesome lower... or at least a lower with some awesome logo or marking on it! So here is my question, what is the coolest marking you've seen on a lower, what do you have on yours? My last build was a del ton, which has probably the lamest logo on it. 43227 Help me find a cooler one!

[mcjhr]

Aero has some pew, and ghost gun blems.....could look for a carnik con lower....I know useless without pics :(

[GunsRBadMMMMKay]

I thought the seekins precision logo looked kind of cool. Then there is the punisher and spider logo spikes lowers.

As an afterthought, the iron cross logo on noveske lowers are pretty tight too. And as for my current one......well....looks likehttp://cdn.firearmstalk.com/forums/attachments/f20/25176d1297722167-pictures-lower-receivers-saa-low-lowr-x1-1x.jpg

[AR_ART]

Personally, I like the Spikes Punisher...

[ChadAmberg]

http://i276.photobucket.com/albums/kk18/Freelance_Bum/MLP%20gun%20stuff/171794__UNOPT__safe_derpy-hooves_meta_custom_muffin_gun_real-life_my-little-arsenal_gunified_rifle_ar15.jpg

[asmo]

The ones that have my trust's name on them.. Truly a wonderful sight to see.

[wyome]

^^^ wtf !!

[kwando]

The ones that have my trust's name on them.. Truly a wonderful sight to see.

This!

Second are:

Noveske
Spikes punisher
BCM
Spikes Hellbreaker
Double D armory

[ray1970]

Anything with an extra pin hole above the selector is pretty cool in my book.

[hghclsswhitetrsh]

I like the noveske and spikes zombie lowers pretty good.

[ray1970]

I like the noveske and spikes zombie lowers pretty good.

I like the live/dead/undead selector markings on the zombie lowers but the logo could really use some improvement.

[kwando]

How could I miss this!!

http://i200.photobucket.com/albums/aa232/brdvictim/spikeslogo_zps209aa5e8.gif

[Hoser]

I think the ones with the extra hole over the safety/selector switch are the coolest. And unfortunately the most expensive.

[osok-308]

I like a lot of these pics so far. Back when I was younger I played some video games and it was actually the game "resident evil" that got me into guns in the first place. I do like the one offered by ucwrg. 43241

Not a big fan of the punisher stuff (i don't knew why), but I like the spikes lower for sure. I also put together an LMT as my first AR (had to sell it to afford an engagement ring for the wife).

[cofi]

Ohhh that hellbreaker I can't decide if it's the best looking lower I've seen or the cheesiest

I like momma bears lower

http://www.redstradingpost.net/auction_images/Auction_Arms/?img=./2013-01-18%20BMG%20INC%20RAPTOR%20LOWER/2013-01-18%20BMG%20INC%20RAPTOR%20LOWER%20003.JPG&w=600&h=

[GunsRBadMMMMKay]

I like the live/dead/undead selector markings on the zombie lowers but the logo could really use some improvement.


I feel the same...the zombie looks, well, it's not pc to say but looks like they got it drawn by the kids on the short bus. There are better zombie slayer logos out there for sure.

[GunsRBadMMMMKay]

Another one I forgot...BRO has a cool logo IMO. I wanted to use one of their sets for a build but I always end up going the mil spec route (i.e. with the lowest bidder :p)

[DavieD55]

The Umbrella Corporation lowers are kind of cool looking.

[osok-308]

The Umbrella Corporation lowers are kind of cool looking.

I think I also like the idea that they have a beveled mag well. That's definitely a plus.

[FLIPCO]

I dont like the logo or the mag well holes, but the lower billet shape is ok

http://www.cre8ivefotos.com/firearms/at-blk_3d.jpg

http://www.cre8ivefotos.com/firearms/a-team-arms-ar-15-3-finger.jpg

[cysoto]

I like the looks of the Mega Arms logo.
It reminds me of Jimmy Neutron.

http://megaarms.com/wp-content/gallery/ar-15_lowerreceivers_billetlowers_gtr-3h-ambi/a_gtr-3h-ambi-01-left.jpg

[muddywings]

you could pay out the butt and get an AXTS weapons lower.
Logo isn't much but cool magpul magwell design.

[cofi]

you could pay out the butt and get an AXTS weapons lower.
Logo isn't much but cool magpul magwell design.
That's a cool lower full ambi also I would love to have that bolt hold open mag button deal it sucks they sued the fcd guy

[ChadAmberg]

Can always go ultra-light...

43505

[Irving]

Is that real?

[ChadAmberg]

The skeleton lower? Yeah... Google for more pics. Plenty out there...

[Irving]

Seems unfriendly to the elements.

[osok-308]

Seems unfriendly to the elements.

My exact thoughts with the skeleton lower. Especially since I'm planning on using this AR for some amount of hunting, there's no way I'd use that.

As far as the AXTS lower, with a price that high, it better come with a bottle of champagne and a high class hooker!

[Sawin]

I like the seekins billet lowers with the ambi bolt release built in a lot. There is also an adjustable contact point under the grip that threads up beneath the take down pin in the upper to alleviate any wobble if they're not perfectly mated.

44367

[SouthPaw]

I like the seekins billet lowers with the ambi bolt release built in a lot. There is also an adjustable contact point under the grip that threads up beneath the take down pin in the upper to alleviate any wobble if they're not perfectly mated.

44367

I love mine. Definitely read the directions as it does not go together like a regular lower. My next one will be a spikes hell breaker lower just because they look cool.

[Kaiser.Shooter]

another one literally coolest lower...
http://i815.photobucket.com/albums/zz78/tennokaiser/20140224_182921_zps93845f78.jpg

http://i815.photobucket.com/albums/zz78/tennokaiser/20140224_182937_zps0ffd293f.jpg