DAMAGE FACTORY

[Great-Kazoo]

. While not in my area. When down in the metroplex, worth a visit

http://damagefactory.com/

[RANGERRON72]

Looked like the web site said "by appointment only" ?? Interesting selection...... 8/25/15.......now listing business hours.....FYI

[kwando]

My FFL of choice... spend $25 and you get free ffl with CBI (private or FFL to FFL)

[hurley842002]

My FFL of choice... spend $25 and you get free ffl with CBI (private or FFL to FFL)
I'm sorry, but you pretty much can not beat that. They may become my new FFL, and I'm all the way in Thornton lol.

[Joe_K]

Hmm I will have to check them out.

[Irving]

I've got a Damage Factory bolt carrier group in my AR and so far it is holding up amazingly well to the rigors of sitting in my closet.

[Great-Kazoo]

Looked like the web site said "by appointment only" ?? Interesting selection......

e-m them. They're running normal business hrs. We drove down and they were open @ 10 a.m.

[Monky]

I've got a Damage Factory bolt carrier group in my AR and so far it is holding up amazingly well to the rigors of sitting in my closet.

Is it sitting wet or dry?


Sent by a free-range electronic weasel, with no sense of personal space.

[Irving]

Lubed up and never fired.

[Great-Kazoo]

Lubed up and never fired.

We're still talking about your "bolt carrier" right?

[BombSquad]

+1 to these guys. Their pricing is VERY good and they are good people. They'll get more of my business.

[Great-Kazoo]

+1 again. Fast turn around time from order placed. Thanks again.

[beast556]

Best prices in the state. Worth the drive if your not local.

[OneGuy67]

Had some lowers delivered there. Good guys with good stuff. Ended up walking out with far more than what I expected to. Worth every penny!

[RonMexico]

Had some lowers delivered there. Good guys with good stuff. Ended up walking out with far more than what I expected to. Worth every penny!

Welcome home stud!

[OneGuy67]

Welcome home stud!

Thanks Thomas! I've hit you up on FB a couple of times and you've ignored me...! You must be busy!

[izzy]

+1 to these guys, good people

[hurley842002]

Can't say enough good things about these guy's, they've helped me out a lot, even outside of business hours.

[bside303]

+2 A plus for Ben and a plus for Mike!

[DonnyCommo]

+1
Easily my favorite shop on this side of town.


Sent from my iPhone using Tapatalk

[Great-Kazoo]

+1
Easily my favorite shop on this side of town.


Sent from my iPhone using Tapatalk

+ I'm happy they like shipping parts out of town, in a timely manner ;)

[bcolorado]

Got a screaming deal on some XDS mags from them the other day.

Good folks...

[SLO]

Just picked up my CMMG MK9 from them a week ago, good group of guys there.

[50bmg]

a+

[Great-Kazoo]

ONCE AGAIN +1. many thanks to CM and Mike. Even got to see The Funky Budda while down there. They missed a good lunch.

[DEAGLER]

+1. Great guys there.. Always have good deals! They met me on off hours to do a trade.

[sampson]

A+ & +1 ! Picked up some pieces parts yesterday. Knowledgeable and helpful. Already recommended to some friends and family. Thx😆

[Jimmy]

Paid them my first visit this weekend. Great guys, easy transaction, great prices... what's not to love?

[spqrzilla]

Website appears not to have been updated since January. Does anyone know if they completed the move, and whether the website shows new address?

[hurley842002]

Website appears not to have been updated since January. Does anyone know if they completed the move, and whether the website shows new address?

Not sure if the move is complete, but they are doing business from the new location.

6806 S Dallas Way, Greenwood Village, CO 80112

[Dave_L]

I believe they have their grand opening at the new location coming up soon. Here is their armslist page that is up-to-date along with their new address:

https://www.armslist.com/store/920

[OneGuy67]

Website appears not to have been updated since January. Does anyone know if they completed the move, and whether the website shows new address?

They are up and running at the new location. However, Chunky mentioned the website will not be functioning for a bit after they moved. Shoot Chunky Monkey or Mestes a PM. They will answer you!

[DenverGP]

Old address was on the west side of 25, new location is on the east side of 25, just south off arapahoe.

[spqrzilla]

Thanks all.

[beast556]

Huge +1, best shop in Denver hands down. Thank you for the killer deals. Well wohrt the drive from ft collins.B

[cstone]

So fortunate to have so many good places to shop for parts and services. Damage Factory's new location is convenient and the customer service is great. [Beer]

[sampson]

Great shop! Friendly and knowledgeable staff. Good prices and selection. Nice shop 😃

[ray1970]

Did I mention they do engraving? [Awesome]

http://uploads.tapatalk-cdn.com/20160314/d9efb9f62260c53dc538845301bba387.jpg


Thanks again.
[Beer]

[rondog]

Guess I should waddle by and check it out.....

[DEAGLER]

Did I mention they do engraving? [Awesome]

http://uploads.tapatalk-cdn.com/20160314/d9efb9f62260c53dc538845301bba387.jpg


Thanks again.
[Beer]


did you color-fill it in?

[ray1970]

did you color-fill it in?
No. It's just a simple, laser etching. That's how it came off the machine.

It's my understanding that they can do deeper engraving that meets ATF requirements if needed but my work was strictly for cosmetic purposes.

[cstone]

Orange color fill would be interesting.

I know it makes a pretty good skin dye. Can you powder coat with Cheetos dust?

[Joe_K]

Any of you know what kind of turn around time it would take Damage Factory to do this, and some numbers and a name on an AR lower?http://uploads.tapatalk-cdn.com/20160318/15b312286d7b2b4e9b9806b9a4468626.jpg

Sent from my SM-G920T using Tapatalk

[OneGuy67]

Why don't you ask Ken (ChunkyMonkey)? He's the owner/operator of the store/laser. Send him a PM.

[Joe_K]

Why don't you ask Ken (ChunkyMonkey)? He's the owner/operator of the store/laser. Send him a PM.
I just drove in, guys were all really helpful! (as always) I will post pics as soon as it's done.

Sent from my SM-G920T using Tapatalk

[Great-Kazoo]

I just drove in, guys were all really helpful! (as always) I will post pics as soon as it's done.

Sent from my SM-G920T using Tapatalk

They have a drive up window now ! ! ! Now that's slick business savvy there.

[Joe_K]

They have a drive up window now ! ! ! Now that's slick business savvy there.
Lol, * Drove up.

Sent from my SM-G920T using Tapatalk

[Not_A_Llama]

Went in today. Cool little shop with some unique and very nice offerings.

Super nice guys.

I'll definitely be back.

[Joe_K]

http://uploads.tapatalk-cdn.com/20160319/bd456cb2eb8f94c0f65f1bcce8e4b7d2.jpg

http://uploads.tapatalk-cdn.com/20160319/c997a1b23b10630c85d8f96bb4ce916f.jpg

Thanks again to Ken and the guys at Damage! Now hurry up and get your business cards updated!

Sent from my SM-G920T using Tapatalk

[hurley842002]

http://uploads.tapatalk-cdn.com/20160319/bd456cb2eb8f94c0f65f1bcce8e4b7d2.jpg

http://uploads.tapatalk-cdn.com/20160319/c997a1b23b10630c85d8f96bb4ce916f.jpg

Thanks again to Ken and the guys at Damage! Now hurry up and get your business cards updated!

Sent from my SM-G920T using Tapatalk

Awesome!

I'm trying to think of something awesome and personal to have them put on my G33, forcing me to not hook it. As long as they don't make it like the M&P9c parts gun.

[wyome]

Dropped by Damage Factory today on recommendation of somewhat co-worker of mine...nice shop and nice to meet Chunky Monkey.
Picked up an AeroPrecision lower, and had a lil 'Merica laser engraved on it...will do business with these guys again...

David


64699

[Dave_L]

I guess I never put an official review of DF yet. Since they pay me $100 to do it, I guess I should. Just kidding! They didn't pay me anything but shop is awesome. Never a bad dealing with them. Only bad thing is I spend too much when I go in.

[Jefe's AR]

These guys are a joy to do business with. HIGHLY recommend them.

[OneGuy67]

I brought in an older Springfield 1911 that had a worn finish. I was contemplating on whether or not to have Bert refinish it. I saw what Ken did with a Glock and thought I'd see what he could do.

http://i828.photobucket.com/albums/zz210/bluebouyz/Image%201_zpsdunba65h.jpg (http://s828.photobucket.com/user/bluebouyz/media/Image%201_zpsdunba65h.jpg.html)
This was the original finish. The frame had skater tape on it from the guy who sold it to me. He was a three gunner. After we removed the tape, we discovered the finish underneath was rough and scratched up. I can see why he covered it in skater tape for the sale.

After Ken did his magic, this is the result.

http://i828.photobucket.com/albums/zz210/bluebouyz/Image%204_zps97cleeww.jpg (http://s828.photobucket.com/user/bluebouyz/media/Image%204_zps97cleeww.jpg.html)

http://i828.photobucket.com/albums/zz210/bluebouyz/Image%202_zpsp86i4ysr.jpg (http://s828.photobucket.com/user/bluebouyz/media/Image%202_zpsp86i4ysr.jpg.html)

http://i828.photobucket.com/albums/zz210/bluebouyz/Image%203_zpsgjdya7mv.jpg (http://s828.photobucket.com/user/bluebouyz/media/Image%203_zpsgjdya7mv.jpg.html)

http://i828.photobucket.com/albums/zz210/bluebouyz/Image%205_zpso0jytira.jpg (http://s828.photobucket.com/user/bluebouyz/media/Image%205_zpso0jytira.jpg.html)

I'm liking the new look immensely. The original wear complements what Ken did so well!

Thanks Ken and Damage Factory! (Of course, while I was waiting as Ken did his thing, I kept picking up things and putting them on the counter. I ended up buying a bunch of stuff as well!)

[sampson]

Awesome and friendly service. Appreciate it. Do all my transfers here even though it is a bit of a drive.

[Joe_K]

What process did he use to get that effect?

Velocitas, Opprimere,
Violentia Operandi

[Great-Kazoo]

What process did he use to get that effect?

Velocitas, Opprimere,
Violentia Operandi


Think the whole deal was laser etched & engraved.

[OneGuy67]

Depends upon what he is referring to. If he is referring to my 1911, the finish was already worn and he simply used the laser to produce the finished look. The pistol finish is still worn, but enhanced. I think it came out great.

[ChunkyMonkey]

What process did he use to get that effect?

Velocitas, Opprimere,
Violentia Operandi

Etching and oxidizing w/ laser basically. http://damagefactory.com/custom-shop/

[Great-Kazoo]

Thanks to Mile & Ken, again for the assistance.

[rtr]

Went there for first visit today to do a transfer. Can’t beat the price and enjoyed looking around. Thanks guys.

[ChickNorris]

A few weeks back was my first visit... it was awkward. I liked the dog fine.
I'll try again sometime to sort it, maybe after they are in the new space.

[Great-Kazoo]

A few weeks back was my first visit... it was awkward. I liked the dog fine.
I'll try again sometime to sort it, maybe after they are in the new space.

They're moving, again ? Good for them.

[roberth]

Where did DF move too?

[crays]

If the plan hasn't changed, I believe they were scouting a larger location a few doors down in the same pod.



Sent from somewhere...

[Great-Kazoo]

Where did DF move too?

They haven't yet. The lights go off when they see you pulling in the parking lot [Beer]

[ChickNorris]

If the plan hasn't changed, I believe they were scouting a larger location a few doors down in the same pod.



Sent from somewhere...

So I was told, yep. Didn't hear the 'when' though.

[mb504]

Same place as always (as of yesterday). Same good friendly crew.

[310]

If someone from here could pm that be great! Few questions but you guys are closed til Tuesday

[Great-Kazoo]

If someone from here could pm that be great! Few questions but you guys are closed til Tuesday

They're suppose to be moving a few doors down, same complex.

[Mazin]

New place looks awesome!!!! (Just a few doors up from the last site)
Stopped in and got to bs with those guys a bit and drool over some things on my wishlist. Top notch store all the way around!

Thanks again for everything guys!
[Beer]

[smithaholic]

I sold a gun lasts week and the transfer was done there. Super nice people and some very nice merchandise.

[Typhoon]

Damage factory has earned 100% of my business these days. Those guys are great, know the laws, and have excellent pricing.

[parabellum9]

First time dealing with DF and not impressed AT ALL by the customer service, but looks like I am in the minority...

[00tec]

First time dealing with DF and not impressed AT ALL by the customer service, but looks like I am in the minority...

I know a few people that haven't been happy with DF recently.

[funkymonkey1111]

Certainly not here to take up for Damage Factory, but these stores have been insanely busy for the past 7 months straight, with limited inventory and irate customers--many who lack knowledge of firearms, and are mad because you don't have the gun their buddy said they need, or ammo to go in it.

So, I'd say cut them some slack.

[Great-Kazoo]

Certainly not here to take up for Damage Factory, but these stores have been insanely busy for the past 7 months straight, with limited inventory and irate customers--many who lack knowledge of firearms, and are mad because you don't have the gun their buddy said they need, or ammo to go in it.

So, I'd say cut them some slack.

I saw this at a local shop here. Guy wanted to fight the employee, because he didn't have ammo to sell him. The shelves in that store are barely stocked, as almost every other gun store in the area, if not the country. And here's this guy going ballistic because they had no ammo to sell him.

[MrPrena]

As people said.
Not many inventory after panic spike of demands.
No cz mags so I had to buy glock 17 mag for $34 for transfer fee fulfillment ($25 merchandise).

Prior to panic buying, many many items on shelves.

[Manster]

I didn’t have a great experience doing an FFL transfer, until I decided to buy a firearm for my “spend at least $25”... then they got a lot nicer

[sneakerd]

It has been a tough year for the people behind the counter. We often wonder what foxhole our customers have been hiding in all year.

[Doc45]

I was in today for my cbi on an incoming transfer. Very busy right at 11, they were moving folks through pretty smoothly. Lots of product in the store. New transfer policy is that it's just $25 for the transfer, no purchase of store items required. Plus the $11 for the cbi fee.

[MrPrena]

Thanks for letting us know.

From their website:

++ ATTENTION ++
AS OF NOV 17, WE ARE SUSPENDING FREE TRANSFERS W/ IN STORE PURCHASE UNTIL FURTHER NOTICE. WE ARE FACING EXTREMELY HIGH VOLUME OF TRANSFERS AND WORKING OVERTIME TO KEEP UP.

All handgun & rifle transfer is $25 + $11 CBI background check.

[.455_Hunter]

It has been a tough year for the people behind the counter. We often wonder what foxhole our customers have been hiding in all year.

No doubt. Some people seem to think the July 2019 status quo for gun and ammo supply is the expected norm- full cases, full shelves, and always cheery smile!

[Doc45]

Another great experience. Had to send a gun to an out of state ffl for a sale and the folks at Damage Factory did an outstanding job of taking good care of me and getting it packed up and shipped very quickly. Couldn’t ask for better service. A++

And they’re going to have a range soon!!!!

[TheGrey]

As always, it was a great experience in Damage Factory. Knowledgeable staff, thoughtful questions, and a range with many options for training! The spouse and I made a few judicious purchases and look forward to signing up for training.

A great service to our community.

[arbol]

Great local asset and well run business. Everytime I have been there the employees and service has been fantastic.

-John

[Hoser]

I had never been in there before today.

Cool shop with solid employees.

[Delfuego]

And you didn't visit me? That hurts...

I will give them another +1 Damage factory did me right a few month ago. Friendly and honest.

[FromMyColdDeadHand]

For a bit there I was going to the Damage Factory so much, that when I got in my car, my iPhone would give me directions there…