Need a source for used plumbing pipe and fittings

[rondog]

I want to build a target stand for steel plates, need some 3/4" pipe and fittings. Too cheap to buy new stuff, and nasty, rusty, old stuff is all that's needed. Anybody know of a place to get some? Or have any laying around you want to get rid of?

Wanna build this.....

[def90]

Habitat ReStores..

http://www.habitat.org/restores/search?zip=&area=CO&province=

[Irving]

Looks heavy...

[rondog]

Looks heavy...
I have a pickup, not a problem. Heavy means it won't fall over either! I have a buncha steel plates I wanna beat the shit out of.

[newracer]

Look for a demolition site.

[Wulf202]

I find the rebar ones like aa targets makes to be better and easier to work with. Ill check my box o fittings but I don't do much gas pipe anymore

[Graves]

I have a pickup, not a problem. Heavy means it won't fall over either! I have a buncha steel plates I wanna beat the shit out of.

So do I, but my power wagon won't often make it very close to where I want my targets. Ron, I'm sure you already have a good idea how far you have to lug the targets to get them setup, but it's something for the new guys who think this is a good idea to consider.

[rondog]

So do I, but my power wagon won't often make it very close to where I want my targets. Ron, I'm sure you already have a good idea how far you have to lug the targets to get them setup, but it's something for the new guys who think this is a good idea to consider.
Yes indeed, not something you'd want to schlep very far I'm sure. I shoot at BLGC though, and I can typically drive right up to the berm at whatever range I want to use. So this would work good for me. Should work good anywhere, if you have a truck and can drive to the target location. But it also screws together, could easily be taken down too. Nothing says it has to be screwed together tightly.

[Jamnanc]

+1 for a re-store. Maybe that surplus place on alameda. Maybe 1" pvc would do the trick with only the top crossmember being steel. Then, Home Depot would be affordable.

[earplug]

Western Scrap and recycle on South Drennon Loop sells such stuff. I buy scrap lead from them. You will need to bring a cutting tool.

[rondog]

Western Scrap and recycle on South Drennon Loop sells such stuff. I buy scrap lead from them. You will need to bring a cutting tool.
Oooo, scrap lead too? Yowza!

Damn, Colorado Springs. No savings there.....

Anyone know anything about Bud's Warehouse?

[Irving]

Bud's has a lot of tile, toilets, light fixtures, and TONS of doors and windows. I don't know that I've seen a lot of scrap metal there. I think the outdoor yard at a Habitat is probably a better bet. Someone was just telling me today that there is a place just East of Buds called something like Extras that has a lot of finish trim and doors as well; but that's off topic.