Harley carry

[Blowby]

Had no place to put my knife for easy access while riding so I used my CAD software to whip up a sheath. Decided to mount it to an existing bolt on the right side of my fork leg just behind the fairing for concealment.


http://cimg4.ibsrv.net/gimg/www.hdforums.com-vbulletin/832x689/80-inventor_sheath_672d857124d01a523b976a4fbd52bbb733 ae375f.jpg








Sent it to the 3D printer software then off to the machine to print one for each of my knives.


http://cimg0.ibsrv.net/gimg/www.hdforums.com-vbulletin/616x667/80-3d_print_acdf2d566a8cf9fc5c07f8937e04d5be973d2af0. jpg


http://cimg1.ibsrv.net/gimg/www.hdforums.com-vbulletin/691x693/80-printing_16f83e6f7f8ed9a13e5883f85adf37f09bcf2f8b. jpg








Final result is printing now so the video is the first revision. Decided to angle the sheath (sharp edge of the blade) toward the fork tube so my hand has a little more room to grab the handle.


https://youtu.be/FuFt3e35lLw


[Shield]

[davsel]

That is awesome!

Can you make a G43 holster that mounts in the same location?

[Jamnanc]

I thought it was gonna be a pic of you with a mares leg and some brass knuckles.

[Blowby]

I thought it was gonna be a pic of you with a mares leg and some brass knuckles.
Ha, like this guy I met at Sturgis!

66676