Attn: CZ P-09 owners

[KS63]

I posted this question on a CZ only forum and got no responses. Figure you guys may have the answer.

If I could have someone measure the length of their factory 19rd 9mm magazine from the base of the tube (not including the base pad) to the bottom of the magazine catch notch? Use of a dial caliper is appreciated. I'm in the brainstorming stage of machining a magwell that's slim in width to be used for concealed carry. With the extra material on the bottom of the frame, the factory 15rd P-07 mags won't clear the magwell, so I'm thinking the P-09 length magazines might work. Thanks for your help!

[ClangClang]

If I had one, I'd do it for you. Only have metal-framed CZs. Good luck with your hunt and a free bump.

[whitbaby]

the factory 15rd P-07 mags won't clear the magwell,

So does this mean you might have an extra 15-round mag or two for a P-07 you might be getting rid of?

[exxonv]

KS63, is this what you need? 67127. I have two P-09's, so I grabbed a mag and took the base off to get the measurement.

81.73mm