need bolt release lever recomendations

[AKA-Spook]

ease of use and durability are top requirements,thx

[ray1970]

If I use anything other than the standard one, I like the Phase 5.

[20X11]

I use the Magpul BAD lever on all mine...never an issue.

[ray1970]

I prefer the Phase 5 over the Magpul. The Phase 5 is all one piece whereas the Magpul installs over the OEM catch and secures with a small screw.

But I'm funny when it comes to mechanical parts and pieces. I figure why have multiple pieces and tiny screws that could possibly come loose and potentially foul things up.

But, for the record, lots of people run the Magpul lever and I haven't really heard any complaints.

Personally, I run the stock catch on all of mine now. I figure why train and get used to a non-standard part. If you get used to having it and using it and you find yourself in a desperate situation where you have to grab a rifle that doesn't have it you're going to be surprised when you reach for it with your trigger finger and it isn't there.

[Bstoker87]

I've used the BAD lever, EBRv1 and EBRv2. Personally like the 2 since it's all one piece but is the most expensive out of the 3.

[Great-Kazoo]

I prefer the Phase 5 over the Magpul. The Phase 5 is all one piece whereas the Magpul installs over the OEM catch and secures with a small screw.

But I'm funny when it comes to mechanical parts and pieces. I figure why have multiple pieces and tiny screws that could possibly come loose and potentially foul things up.

But, for the record, lots of people run the Magpul lever and I haven't really heard any complaints.

Personally, I run the stock catch on all of mine now. I figure why train and get used to a non-standard part. If you get used to having it and using it and you find yourself in a desperate situation where you have to grab a rifle that doesn't have it you're going to be surprised when you reach for it with your trigger finger and it isn't there.

I agree on less small pieces. A 1 pc is more conducive for me

[XC700116]

I've been having good luck with the seekins enhanced version after scrapping 2 strike industries ones due to sloppy fit that eventually failed to actually hold the bolt back after a while of use. I had been looking for something with a more substantial pad on the bottom for ease of locking it back manually and showing clear under time in a couple team matches I shoot. Needless to say, the end result was worse than a bit of fumbling for a smaller nub. The seekins units seem to be holding up well.

[Hoser]

I keep going back to the issue version.

[Bob Hostetter]

The Battle Arms Development Enhanced Bolt Release is most excellent.

[bobbyfairbanks]

Stock. Some gizmos are better left to mall ninjas

[Hoser]

The Battle Arms Development Enhanced Bolt Release is most excellent.

As an employee I am sure you are not all biased...

[buffalobo]

Forum foul.

[Punkface]

I use the seekins on mine