Gas block screws

[Bandrew1989]

Anyone have any suggestions for anything to seal gas block screws? my screws recently came loose.

[Great-Kazoo]

One of these to peen the screw to block, like the bolts are done on your BCG.. Or any small center punch will do. I use red loctite on them too

http://www.harborfreight.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/i/m/image_18511.jpg

[thedave1164]

Loctite

[motoboy]

I have used a product called Rocksett with good results.

It is medium strength but with a much higher temp rating than normal loctite.



https://www.midwayusa.com/product/168884/flexbar-rocksett-high-temperature-thread-locking-compound-2-oz

[kwando]

Pin the gas block

/close thread