Squeeze
07-12-2017, 16:32
I searched for this prior to posting, so I apologize if this is in fact posted somewhere in this section.
I am considering getting some of the Xtreme 165 gn plated round-nose bullets for loading in my 9mm for subsonic loads. I have heard of people loading them with 3.0 grains of Titegroup and getting good results. I currently have Accurate #2 and Ramshot Silhouette on my bench and would prefer to use one of those. If anyone here has experience with these bullets and/or load data, I would greatly appreciate some guidance. I have also heard of folks loading the 158 grain .38/.357 bullets in 9mm and getting good results also. This is also something I am considering giving a try. I am going to start some testing on loads when I get the bullets in and I will report back with results as soon as I have them. [Beer]
I am considering getting some of the Xtreme 165 gn plated round-nose bullets for loading in my 9mm for subsonic loads. I have heard of people loading them with 3.0 grains of Titegroup and getting good results. I currently have Accurate #2 and Ramshot Silhouette on my bench and would prefer to use one of those. If anyone here has experience with these bullets and/or load data, I would greatly appreciate some guidance. I have also heard of folks loading the 158 grain .38/.357 bullets in 9mm and getting good results also. This is also something I am considering giving a try. I am going to start some testing on loads when I get the bullets in and I will report back with results as soon as I have them. [Beer]