Anyone in CO build 1919a4's

[Lurch]

Looking for someone who has built them to bounce a couple of questions off them.

Thanks

[bobbyfairbanks]

Used to own one. I had all my questions answered by Ohio auto ordnance. They where very helpful

[Lurch]

Used to own one. I had all my questions answered by Ohio auto ordnance. They where very helpful

Thanks but looking for someone who has actually built one from a parts kit.

[Wulf202]

There's a couple of guys on weaponeer.net who are local sot class 7 who have done them

[Circuits]

I've built them from parts kits.

@Wulf202 - no such thing as a "sot class 7" ;)

[Wulf202]

I've built them from parts kits.

@Wulf202 - no such thing as a "sot class 7" ;)

You're lucky it was that legible with the way my auto correct is. I have to teach it all new curses after factory reset

[Lurch]

I've built them from parts kits.

@Wulf202 - no such thing as a "sot class 7" ;)

PM sent.

[BladesNBarrels]

You might look at the 1919a4 Forums.
There is a category for the builds.
Groups get together and do builds over a week-end.
Colorado may have a group or a build scheduled.
http://1919a4.com/forumdisplay.php?6-Semi-1919a4-Building

[Lurch]

You might look at the 1919a4 Forums.
There is a category for the builds.
Groups get together and do builds over a week-end.
Colorado may have a group or a build scheduled.
http://1919a4.com/forumdisplay.php?6-Semi-1919a4-Building

Thanks I'm on that forum and have reached out to them. I'm trying to find someone local to help with a repair before I spend the cash to ship it off to someone.

[Lurch]

Thanks to Circuits my problem maybe solved. Need to run out to the range and confirm that it's better.