Log in

View Full Version : slug tissue penetration



rustycrusty
05-01-2018, 20:04
Penetration depths observed in calibrated ballistics gel:

Standard velocity foster 1oz (1600 FPS)
8-14”
-low penetration because of slug deformation and fragmentation

Reduced recoil foster 1oz (1130 FPS)
18-24”
-more penetration due to less impact deformation + no fragmentation

Reduced recoil foster 7/8oz (1300 FPS)
18-24”
-this includes ‘weak’ slugs like the Aguila mini slug

Hardened ‘penteator’ 1oz (1350 FPS)
+30”
-varying designs of attached wad and cavity insert prevent impact deformation

Brenneke hardened +1oz (+1500 FPS)
+30”
-increased and centered mass, hardening, with attached wad prevents deformation

Just thought I’d share what I saw in reviewing many different tests from written articles w/photos to YouTube videos.

It contradicts what I’ve read just about everyone say about slug selection, especially regarding the reduced recoil slugs having low penetration values compared to standard velocity foster slugs (which actually have poor tissue penetration depth)



Sent from my iPhone using Tapatalk

MarkCO
05-02-2018, 08:27
"Standard" velocity for 1 ounce slugs is up to about 1350 fps. 1 ounce slugs over 1400 are most certainly "Magnum" loads, at least based on SAAMI.

Having actually performed slug penetration tests (and at animals with body armor attached) for a few different groups, there can be significant variation in penetration with lead slugs: foster, wad, plumbata, sabot, that are traveling over 1300 fps, whether hard or soft. I am of the camp that a 1 ounce slug from about 1100 to 1300 that runs your gun and is accurate is about all you really need to worry about with a smooth bore firing full diameter slugs. That is true for defense against humans with body armor or not. When we tested slugs on engine blocks, the standard slugs were not as successful at stopping the engine from running as the hardened Magnum Penetrators.

I would not dismiss "weak" slugs like the Aguila. 7/8 ounce at 1200 is pretty decent, and if they run in your gun (P12, Win 1300, KelTec, SXP), they are a good choice.