PDA

View Full Version : Problem with magpul drum.


fitz19d
07-22-2018, 21:01
Have a magpul drum I finally went to load for the first time ever after it sitting for 6 months. Loading lever seems way tougher than you would expect, near the end I was just about breaking a sweat from it. And I was only able to get 50 not 60 rounds in it. Any idea's on what might be wrong with it? At 50 rounds, I can get the lever all the way over, but it doesn't create enough room for another round.
Mazin
07-22-2018, 22:54
Have you tried seeing if your spring is binding on something possibly around the body of the drum or even the follower?
fitz19d
07-23-2018, 07:06
I've never opened one up, heck I think the instructions try to advice you not to? Dunno was first attempt and I figured I'd shoot it and see if it did fine. I had tried stripping a couple rounds out and reloading near the end which seemed fine, not too much pressure to load into the gun I don't think. Sitting with my gear bag at my parents who are taking it to salida while I commute up to a funeral on my bike. Figured I'd go to the free outdoor range there to zero a couple scopes and give the drum a try.
Wiggity
07-23-2018, 10:09
Work out more often?


Sent from my iPhone
fitz19d
07-23-2018, 11:51
More like grip trainer. But I wasnt being literal. At the end I still am able yo move the crank the full length of motion, it just stops seeming to advance rounds and deeper
DireWolf
07-31-2018, 22:57
More like grip trainer. But I wasnt being literal. At the end I still am able yo move the crank the full length of motion, it just stops seeming to advance rounds and deeperAs the drum gets full, you may need to crank the lever several times per round to get each of the last few in (while applying loading pressure to consume the bit of slack from each lever-crank...)
fitz19d
08-01-2018, 07:21
As the drum gets full, you may need to crank the lever several times per round to get each of the last few in (while applying loading pressure to consume the bit of slack from each lever-crank...)

Yes, magpul CS said this also. In the course of fighting it, I was giving at least 3-4 cranks and not getting a round in.

Took it to the range and it was feeding ok at least. My range bag at my parents though who shuttled it up to Salida while I took my bike, so need to get it back some weekend before I can fiddle w/ it more.