Smith & Wesson 422 or 622 information

[earplug]

Thinking of getting one as a suppressor host.
Have a model 41 so we already have magazines.
Anyone have issues with the pistol?
I have Marvel, Buckmark and High Standard and each suppressor option would need machine work and sights or optics.

[feal]

Just get a threaded barrel for the 41..... https://clarkcustomguns.com/product/clark-sw-41-match-barrel/

[Great-Kazoo]

Thinking of getting one as a suppressor host.
Have a model 41 so we already have magazines.
Anyone have issues with the pistol?
I have Marvel, Buckmark and High Standard and each suppressor option would need machine work and sights or optics.

the buckmark can run a tacsol bbl.

https://tacticalsol.com/Detail.aspx?PROD=1366860&CAT=13329

regarding the HS. Those are too nice and collectable to thread the bbl.

[earplug]

I ended up winning a 4" target 422 on Gunbroker. After I ordered a Tacsol barrel and rib for the Buckmark.

EWK makes the 422 adapter.

Model 41 barrel would need higher sights or a optic. Weight is a issue with ours. Have a Clark steel barrel already.

[Gman]

I have a 6" 622 and loved it. Was stolen and later recovered by the police in a pursuit, so it's a bit scuffed up. I can't get it to run properly. Replaced all of the springs, the firing pin, etc. With the receiver above the grip, a 6" bbl seemed closer to a 4". Low bore so it would be a great candidate for suppressor.

Takedown is a bit 'unique', but once you've owned one you learn how to do it quite easily and effectively. Including using the head of a spent shell against the spring guide rod for takedown. Was absolutely reliable and very accurate before it left my possession.

[earplug]

Gman. Barrel assemblies are available on Ebay. Or your frame got bent in the ruckus.

[Gman]

Frame is straight. I'd likely have to take it to a smith to get it reliable again and due to the cosmetic damage it has sustained, it's just not worth it to me. Since I have mags, I may look for a replacement at some point, depending on the cost.