Cartridge Gauge

[eddiememphis]

Do I need one?

I read a little about them and watched a couple videos. Seems like it may be handy to set up sizing dies for rifles. Not sure about the use for straight walled cases.

Amazon has a bunch of different brands in stock, all around $25. Is it worth having them or am I fine just using my calipers?

[Grant H.]

Yes.

Any reloads should be, at a minimum, sample checked through a case gauge.

Admittedly, it gets a little more important when you are running progressive presses, but even single stage loading can cause issues that you don't want.

I have the 100 at a time case gauges for my bulk pistol ammo, and I own individual case gauges for every round I reload.

[Hoser]

While I have a few for various rifle calibers, I just use barrels for 9/40/45 ect.

Your barrel is the best gauge of them all.

If you have a gauge that is at the max end of things and a chamber that is at the min, you can end up chasing your tail.

[Little Dutch]

I have a few of them. I never use them. Like Hoser, I use the barrel.

[izzy]

I use them for everything I load. Kind of useless for pistol but I still check them.

[Little Dutch]

I have a few of them. I never use them. Like Hoser, I use the barrel.

I want to retract this slightly.

Many years ago, before I had ever heard of factory crimp dies and primers were $15 per thousand, I was having crimping issues with straight-wall pistol cartridges. The RCBS Chamber/Cartridge gauges were really useful to test chambering. If it didn't drop right in the crimp was too heavy and it wasn't going to chamber right.

[whitewalrus]

Get them for all bottleneck cartridges to help set your dies faster. If you are worried about rust, some companies make them out of stainless steel.


Sent from my iPhone using Tapatalk

[eddiememphis]

Get them for all bottleneck cartridges to help set your dies faster.

Does this include .30-30?

I understand using one for a cartridge that headspaces off the shoulder.

[beast556]

I have gauges for every caliber I load. I don't gauge my blasting ammo but I check all the other rounds I load. It only takes a few minutes and gives me peace of mind. I have gauges from wilson, lyman, and dillon, dillon makes the nicest gauges.

[whitewalrus]

Does this include .30-30?

I understand using one for a cartridge that headspaces off the shoulder.

I don?t load any rimmed rifle cartridges, but I assume the sizing die would set the shoulder back. May not matter as much as others, but if you can find a gauge that uses the shoulder may be worth it.

The gauge is just a good overall check and worth it for multiple gun loading. Otherwise you can just get the die set based on your own chamber and feeding.


Sent from my iPhone using Tapatalk