PDA

View Full Version : Big Ben 2-Gun Match



SA Friday
05-02-2022, 11:28
Ladies and Gentleman, the inaugural Big Ben 2-Gun match is in the books. I'll try to post the sign up here for future matches. These are not monthly matches. They are scheduled for the FIFTH Saturday of the months that have them. So April, July, and October of 2022 will have a match. The match will be at the Ben Lomond Gun Club, Ramah, CO, on the competition berms. Match cost is $25 cash at check in at the range. Sign up for the match will be on Practiscore. Match Director is James Dominico. He will be setting up a mailing list for the matches shortly.

The match is running under a modified Practical Competition Shooting League rule book. We didn't have PCSL targets for the first match, so we slightly modified the course of fire. It wasn't a big deal. We used standard USPSA targets for pistol, and IPSC 'turtle' targets for rifle. PCSL rules allow for reholstering a loaded pistol on the clock. That is not allowed at BLGC, and is a DQ if done at the match. Pre-loading the pistol, and shooting with the rifle, dumping it in a barrel, and then drawing and shooting the pistol IS allowed. You NEED a pistol holster with positive locking, not simply friction retention or competition type holster. I was skeptical about this at first, but it works. If you show up with a Double Alpha/CR Speed/Guga Ruba type holster or non-retention holster, you will NOT be allowed to move with a loaded gun.

This match will test you, physically, mentally, and possibly even emotionally. It a longer than normal day for a match, but it's worth it. Here's what it looks like.
https://www.youtube.com/watch?v=JIAxGF9EuX4&t=2s

SA Friday
05-02-2022, 13:19
If you want to be on the mailing list for match information for the 2-gun match, email James Dominico at the following

Bigben2gun@gmail.com

funkymonkey1111
05-02-2022, 13:41
Sean,

would a GX Vice holster work for the match?

https://gxproductsusa.com/product/gx-vice-holster/

Boomstick303
05-04-2022, 07:45
Sean,

would a GX Vice holster work for the match?

It would work fine. Not the fastest to draw from, but the lever should apply enough pressure to keep from loosing a loaded gun during movement provided the lever/retention is tight.

It may be wire to test running with it with a loaded mag, but unloaded to test.