PDA

View Full Version : Battle Comp


275RLTW
07-15-2010, 18:34
Just got in the Battle Comp from Lt. Normandy in CA (the gun guru on Mythbusters) to T&E and I have to say that I'm impressed. Muzzle control was exactly what you expect from any compensator: the muzzle just stayed still. We could do a full auto, full mag dump with just the firing hand on our SBR's and keep all hits within a 8.5x11" piece of paper at 10 yds. Muzzle blast was minimal, even to the sides (great benefit for team movements) unlike most other comps (PWS, Surefire, etc). It has the same rings on the back as a standard A2 so Gemtech HALOs will fit as well. I'll write up more and post picts and video later...
275RLTW
07-19-2010, 16:19
http://battlecomp.com/
SA Friday
07-19-2010, 16:26
Try it prone on a nice dry day at an outdoor range and video tape it for us. Go for the full auto full mag dump. [Tooth]
275RLTW
07-19-2010, 16:53
Here are some short bursts one handed

http://www.youtube.com/watch?v=PKKo9dgg3xY
Irving
07-19-2010, 17:16
I think I was just the first viewer. Awesome.
275RLTW
07-19-2010, 18:32
semi auto rapidfire
http://www.youtube.com/watch?v=Gmov6bFkvtE
Irving
07-19-2010, 18:36
Looks pretty flat. Maybe you can find a video of one where the muzzle jumps around more for comparison?
Ranger
07-19-2010, 19:41
Just got in the Battle Comp from Lt. Normandy in CA (the gun guru on Mythbusters) to T&E and I have to say that I'm impressed. Muzzle control was exactly what you expect from any compensator: the muzzle just stayed still. We could do a full auto, full mag dump with just the firing hand on our SBR's and keep all hits within a 8.5x11" piece of paper at 10 yds. Muzzle blast was minimal, even to the sides (great benefit for team movements) unlike most other comps (PWS, Surefire, etc). It has the same rings on the back as a standard A2 so Gemtech HALOs will fit as well. I'll write up more and post picts and video later...

I am SOOOOOOO ordering that :). Awesome hardware, that set you back!
275RLTW
07-19-2010, 22:06
The price on the comp isn't that bad, about $150 I believe. I'll confirm and let you know. Not too bad for a comp, about average for quality machining.
275RLTW
07-22-2010, 13:32
We are now the distributer for the Battle Comp in the Rocky Mountain region. Ordering info can be found at http://www.coloccw.com/pages/battlecomp/ (http://www.coloccw.com/pages/battlecomp/)
275RLTW
09-27-2010, 10:28
OK, here's more one handed full auto fun with a 10" upper and a battlecomp....

*disclaimer* Absolutely no fun was had while doing this demonstration. It was entirely work related and for sales purposes only!

http://www.youtube.com/watch?v=mrZcoCsVbXk
BigBear
09-27-2010, 10:44
Some people just get all the fun... I mean, wait!! There was absolutely NO fun at ALL during that "exhibition".... hehe
275RLTW
09-27-2010, 11:32
That'a right, no fun whatsoever. That grin at the end is completely misleading....
ronaldrwl
09-27-2010, 12:46
http://www.battlecomp.com/home
Error 404: File Not Found
275RLTW
09-27-2010, 13:15
Error 404: File Not Found


They changed their web address. Now located at http://battlecomp.com
xjtwo
09-27-2010, 14:40
These fit the Halo now?
275RLTW
09-27-2010, 17:25
fits new HALO, will check on pre-09 HALO's
TriggerHappy
10-23-2010, 18:33
I have a PWS and its kinda loud, especially for the guys to my left and right, how does this one compare for noise?
275RLTW
10-23-2010, 22:37
Less concussion for the shooters next to you. It's less obnoxious than the PWS with good recoil management.
TriggerHappy
10-24-2010, 12:15
That's what I wanted to hear. I think I will be trying one.
[Beer]
Chase723
10-26-2010, 13:07
Looks like you didn't enjoy that at all. lol.
BigBear
10-26-2010, 13:13
These fit the Halo now?


So these can be pinned/welded/whatever and a Gemtech Halo suppressor will fit over them? I'm just kind of confused....


NVM, found this:

Folks are actively running HALOs on the BattleComp as we speak, although neither BCE nor Gemtech recommends it. The OD of the BattleComp is .850" and the ID of the HALO is .862" -- so that 12/1000ths (6/1000ths on each side) can cause some droop if the suppressor loosens.

We are looking at several suppressor adapter designs by Winter 2010/Spring 2011: HALO, bi-lock, and a proprietary version as well.

Hope that helps!

Best,
Alan
only10x
11-25-2010, 02:36
anyone know if we can get a group buy going here?
[Beer]
275RLTW
11-26-2010, 23:51
They will most likely refer you to us as we are the distributer for BattleComp for this area.
kilovictor
01-29-2011, 17:26
Do you have any blems or any thoughts on a group buy?
275RLTW
01-29-2011, 21:39
No blems in stock. They sold those fast