The post whore thread.

[Mazin]

Got my fishing magnet yesterday. Picked up one of our cast iron pans. This is gonna be fun once I can get to some water where people have likely lost stuff.

Just don't head to the lake where so many of our members had their boating accidents that claimed so many firearms, it's like the Bermuda Triangle there.

[ChickNorris]

I wish i was 8 so I could start a fight & twist off their (someone's) head like a plastic doll.

How was everyone else's day?

[Great-Kazoo]

I wish i was 8 so I could start a fight & twist off their (someone's) head like a plastic doll.

How was everyone else's day?

Considering i forgot to pack an important item and remembered 45 min. in to our trip. Turning a 6 a.m departure in to a much later one, it was ok.

[Great-Kazoo]

If you can picture what the first few minutes of a cold snow look like swirling around on the road . That's what CA outside Sequoia park looks like. I thought CA's roads sure seem dirty, for as dry it is. The i realized that's ash from the fire 300 miles away.

[Mazin]

Poop on a stick

[Mazin]

Bob Dole

[SideShow Bob]

Considering i forgot to pack an important item and remembered 45 min. in to our trip. Turning a 6 a.m departure in to a much later one, it was ok.

That sucks. Must have been pretty dang important to turn around after traveling for so long.

[ChickNorris]

Good Morning Folks

[hurley842002]

Good Morning FolksGood morning, on this eve of Thanksgiving.

[ChickNorris]

: )

[ChickNorris]

Did I mention the heater core chore for my Dodge might be sorted by the end of the week!?!

I'm looking forward to it. Yep.

[ChickNorris]

Plus I am so thrilled that today & 'morrow is a no cooking /entertaining /obligatory visit holiday for me!

Yehaw

[ChickNorris]

Kazoo said derp

[ChickNorris]

Poit

[ChickNorris]

Poop on a stick

Bob Dole

Um... er, what?

[ChickNorris]

Hehehe magical toober

[CS1983]

Bob Dole

The other night I heard an old interview with Harry Browne. He said Bob Dole was the worst candidate the Republicans could field, and field him they would.

[ChickNorris]

Santiago Wednesday

[Great-Kazoo]

The other night I heard an old interview with Harry Browne. He said Bob Dole was the worst candidate the Republicans could field, and field him they would.

We liked and voted for him, unfortunately he always came across as too stiff. Unlike the relaxed humorous side he finally showed on the Tonight Show after the election.

Throw in this quote of his and we were disappointed he lost

As a young man in a small town, my parents taught me to put my trust in God, not government, and never confuse the two."

[Great-Kazoo]

Santiago Wednesday

Farm fresh bacon and eggs with some custard filled eclairs for us. Eclairs picked up yesterday at

https://www.kohnenscountrybakery.com

[ChickNorris]

7 nanometers is pretty dang small for a transistor. Really, thats at a point where electrons have a hard time 'fitting through the tubes'.

Marveling at the concept of atomic layer deposition & specificly self assembled monolayers (SAMs)

[ChickNorris]

Narrrff

[MrPrena]

7 nanometers is pretty dang small for a transistor. Really, thats at a point where electrons have a hard time 'fitting through the tubes'.

Marveling at the concept of atomic layer deposition & specificly self assembled monolayers (SAMs)

"Known" Radius of electrons are in range of ~~2.8x10^-15 m


:)

[ChickNorris]

"Known" Radius of electrons are in range of ~~2.8x10^-15 m


:)

Who collapsed your wave function?

<giggle snort>



@ 14nm the pipes started leaking & @ 7nm there's not much room for plugging. Just like friction, only different.

[ChickNorris]

Tonight I'm going to watch the remainder of Ballad of Buster Scruggs. Guess when they made me they forgot to put in the quit.

[ChickNorris]

Pan shot!

[Irving]

At least someone appreciates that movie. I saw the directors and told my daughter, "We're watching this, now." Her deep groans satisfied me.

Kowalski, have you recovered yet?

[Erni]

Finally got the 3d printer "set up" in the basement. Now I get skipping issues on layers and movement. Back to tweaking settings and trying to get a single stupid part done. Damit.

[MrPrena]

Who collapsed your wave function?

<giggle snort>



@ 14nm the pipes started leaking & @ 7nm there's not much room for plugging. Just like friction, only different.

I purposely use Angstrom to engineers and use nanometer to astrophysicist, chemists.

[ChickNorris]

I purposely use Angstrom to engineers and use nanometer to astrophysicist, chemists.

: ) ha!

[BladesNBarrels]

The only source of knowledge is experience.
Albert Einstein

[Mazin]

Hope you Ho's have a great turkeyday!

[Great-Kazoo]

Hope you Ho's have a great turkeyday!

Go Pluck yourself.

[Erni]

Go Pluck yourself.
Stuff it.

[ChickNorris]

Hope you Ho's have a great turkeyday!


Go Pluck yourself.


Stuff it.

Fork you. Hehehe

[ChickNorris]

Good morning folks

[ChickNorris]

Zort

[ChickNorris]

Troz

Narrrrf

[ChickNorris]

Word of the day: seconds


Like peewee's playhouse

[Great-Kazoo]

partly cloudy, rained last night here. 1st time since april.

California Dreaming

On such a winters dayyyyyyy.

[MrPrena]

I want a scar 20s and she said we already too many scars.

[OtterbatHellcat]

Kowalski, have you recovered yet?

Yeths.

Happy Thanksgiving, ho-bags.

[OtterbatHellcat]

We liked and voted for him, unfortunately he always came across as too stiff. Unlike the relaxed humorous side he finally showed on the Tonight Show after the election.

Throw in this quote of his and we were disappointed he lost

As a young man in a small town, my parents taught me to put my trust in God, not government, and never confuse the two."

I liked Bob fine.....and I would add that I think the first female president of this country should have been Elizabeth. I really liked her. It deeply frightens me that the first female president of this country might be the likes of Hillary or Oprah.

[OtterbatHellcat]

However, either a boar or a sow from a severely dysfunctional barnyard really is still just damage control at the end of the day.

[ChickNorris]

Good morning folks

[ChickNorris]

Heater core chore day.

[ChickNorris]

Poit!

[ChickNorris]

Nice Moon this morning.

Headlamp? I dont need no stinking headlamp.

[ChickNorris]

Did I mention the heater core?

Very excited to have the hassle resolved.

[ChickNorris]

ALL the threads!!!

Muhauwahahaha ha

[ChickNorris]

Time to make the donuts. Good day all.

[wyome]

Chick needs a hobby

[MrPrena]

It isn't black Friday anymore. It is sold out friday.
It should be called black-thanksgiving.

[CS1983]

I don't know if America is ready for a 0.000001% Native American president.

[Irving]

I'm getting a Black Friday haircut right now. Then I might go see if I can find a specific Tetris disc for my PS4.

Considering trying to head across town to Ark, but not sure I want to deal with the traffic and they might be closed by the time I get there.

[MrPrena]

How much was a black Friday special haircut?
If under $4,I am in!

[LOL]

[Irving]

I asked and they said they had their sale last week. I did get a coupon for $7.99 haircut next time though.

Got my trust notarized. Went to a video game store and it was packed. I wasn't really paying attention and just assumed all the people were looking around shopping. Once I realized that they were all standing in line, I just left.

[Great-Kazoo]

It isn't black Friday anymore. It is sold out friday.
It should be called black-thanksgiving.

The outrage over the cultural appropriation of something else would be deafening

[buffalobo]

I'm getting a Black Friday haircut right now. Then I might go see if I can find a specific Tetris disc for my PS4.

Considering trying to head across town to Ark, but not sure I want to deal with the traffic and they might be closed by the time I get there.

Should have come by, good time at Ark today. The guys made sure to ask if I was buying the flame thrower.

[buffalobo]

I didn't buy the flame thrower and Noah just shook his head when I talked about rednecking one from a propane weed burner.

Mrs bo was pleased I did not disregard her wishes on the flame thrower. Not very happy about the prospect of redneck version though.[werdo]

[OtterbatHellcat]

Spent some time on flatbed wiring today, more time tomorrow for a while anyways.

Blending '02 E-350 Powerstroke chassis circuitry with '79 F series wiring can be fun and exciting or a pain in the ass depending on your outlook, and everyone who has seen it in person as it currently sits pretty much says "wow", or something similar. And it's not done yet.

Next week I get the bumper back from powder coating and the receiver hitch shows up on Wednesday the email said. It's gonna be a real joy when this project is finished......found out there's a custom metal fab shop close to work, and I'm gonna visit with them about getting some brick shithouse nerf bars bent for me, and maybe an aluminum tube rail with light tabs for the headache rack on the bed. Need to see what the light pattern is from the rack first.

[OtterbatHellcat]

She agrees strongly with you:

https://upload.wikimedia.org/wikipedia/commons/6/6a/Elizabeth_Warren%2C_official_portrait%2C_114th_Con gress.jpg


(obv yanking chain) [Beer]

It's all good, brother. :)

[OtterbatHellcat]

Met Sniper7 today, he's a cool guy and it was a pleasure.

[OtterbatHellcat]

FTR....I also want a flamethrower instead of a weed burning wand.

[buffalobo]

FTR....I also want a flamethrower instead of a weed burning wand.

Ho yeah!

Mrs bo says she is first in line if you decide to sell truck.

[OtterbatHellcat]

Noted, Sir.

If you don't bring you and her over to see it, you might see it at crc next year sometime. It would be a pleasure to give her a ride in it with your permission of course. I already have to make it Handi-abled for short folks anyways.....I can barely get into it...lol. The brick shithouse nerf bars will help with a step ladder set up that I have in mind. The hood of the truck is upwards of six feet high.

[ChickNorris]

Good morning folks

[ChickNorris]

Heater Core Chore. - DONE!

[SideShow Bob]

Congrats on the heater core..... Who’d you sucker into doing the job ?

[Irving]

I bet you feel all warm inside* now.





*The cab

[ChickNorris]

Congrats on the heater core..... Who’d you sucker into doing the job ?

Another member here offered his assistance & we did it together. Traded an item I wasn't using much to be able to use my truck everyday. Works for me. Yep.

[ChickNorris]

I bet you feel all warm inside* now.



*The cab

Funny you say that because twice last night I had to turn off the heat & crack a window while driving because it was hotter than I was accustomed to. Before I often had to crack a window to avoid the vapor. Nice change.

Having an unpleasant chore off the list is satisfying* too.

[SideShow Bob]

Nice change.

Having an unpleasant chore off the list is satisfying* too.

You should go to Ark Tactical and treat yourself for that job well done...... And to look at that flamethrower so that you can have fun instead of having to plow snow...

[Irving]

I'm on my way down there right now.

[ChickNorris]

I have seen it. A few weeks ago I made a point of stopping in to see the shop for the first time & to meet some of the guys.

[SideShow Bob]

I have seen it. A few weeks ago I made a point of stopping in to see the shop for the first time & to meet some of the guys.

But that “Black Friday” price makes it irresistible, especially when it will earn its keep clearing snow.

[Irving]

Well, I'm in the NFA game now. Kind of. I guess it doesn't count until something comes home with me.

[SideShow Bob]

Well, I'm in the NFA game now. Kind of. I guess it doesn't count until something comes home with me.

Congrats, what are you getting ?

[Irving]

Looks like an OSS Elite 7.62, direct thread, and a Bowers Bitty .22 with a Ruger Mark IV to act as a host.

https://lh3.googleusercontent.com/W_R4dFcHTJPttw0I0IhqAC_6zSju98sPdK6ejOAvO_n6b8TtP7 jfuRnEf8sNJ49xZIX9n8hF6UffHSf9m9g1eU2zWxnGwUx5nYLF k-xJgKVeBAsCold-h0ULOPjEkAiN4AxPJBTx78AgeWTQubPQo6Lnf3rQ1NsB2hDW40 nrivNPMZeihXv42vvbaxKTmyLdbnmMGaOKnFZqP8fFP-tjEC1xOlrT6DSNt48iGbDtSkfU3Sx0g93M070EIAfdxgFfcdB0 Pp2r1Xzd-nB-tdSzIkdN_Nl1hLTD4p69bATkO-sKr5lA-F70Wdm-2WqzHK_Azp8mKM_X_7mT5F9Oly8pNFmvDo2DR4qJ_NXMdeA8n8 dv3ymSnU6qJ9FcWyg3GOq4UuiRe8wAz-3bLGaAOvYJX9LzpdTyseMVCfenCbK0ZZATbHBi8hbYstTsQmNy jpOZ4IMEiKMHAqddopt2HNnuDrjZR5tJ2CxE2Y2XCIwzqVUnt7 jdFVJxIToxyYZxzYaC1MuvsUKI8FcPKIfoxu32dlp_AGvhM3F-mcZ1geHs3iypHC6s24NbQXNHWdLFZGFRDqjA52KfaaXnbExx12 PCT9dbKqZ6vWuY5YShdVPKoND85Y9AQ3-fH7__B4s_KBIEYgC88k5UMrlna0YlLuuDul2cYrd7SPSRAyK2G ivm5SoM6Qk-L5M9QQjyXyVZJp_D2l0hGb2u3uFCwhLfR60=w715-h626-no
https://lh3.googleusercontent.com/DK7yMnSWaHdwbsSiZq_Q_e1cnQJ6cUdEhzx4hKr0Lz51OhRHft 1EznA0Q1u88WBQMAkHvGzwvgPrMIBIFnWGY99h8piqraLtY1yL ZgckbQPwMixhZdzHDS27cRjqEaCSMbfRxjkaVl5XL2xp7_4qDH vaVMnUsyrZ7uwBArPADdUxrvinbQKg7zUav6TH8grbLyCaJcAD PtHF-58eIbEeLpx7TyGKl17RlArmDOTyHZPH35W4RQkx75fU8g2NbKD 283-ZYoaBrvjGb9CvZJQILqfTqsdtC8G2wjBYbWp20uc4WvfzPxRxs gXT-Z1n2AfrA3HQ_UryFy2F-aI0-y7UjFdrIWkI4mfPPKaFskOnTw4em3Jds5hTeMxYrSHN0FI3_Xo jAKqfdhdLOWePJoosgpBn7p9-c0JNq45i14iPllIY57YbiECPfzFR9C0DE2RQApyQevRHBJvZf6 GUMNTWOaxzU9apVIGpceOzZxrHvYYzae6PbhV4SdsKIt6H6YQa VIyh_udqe5N-QZYFHtvU07zNljysXTAK5gQ7mvDduG2yXFIbRIf3dLTI9T_Grt nS3a8iA0iB-PkFG67OJZeb4a42VNxBsEyDkhmdtHoKQNh5-l7d9NjaKnqzewe4jWm9Gt4YvGDxgc9YxtGGIBg9IMtO9VJPt5r dTkmVxrOLKhYbpRmQKCqoKVuu0ReW-1SBrtyNENVX5xRey-VY0y0=w1113-h626-no

[CS1983]

Fancy.

[brutal]

Looks like an OSS Elite 7.62, direct thread, and a Bowers Bitty .22 with a Ruger Mark IV to act as a host.



You're gonna love that MKIV, especially if you've ever had to take down an earlier Ruger MK pistol.

I run a TBAC 22 Takedown (Ti/magnum rated) on mine (scary black model), sweet guns for sure. So much fun to shoot with (Gemtech) subs.

https://i.imgur.com/dIVpxj6.jpg

[Irving]

I've never had any .22 pistols, but was aware of the Ruger takedown issue. I originally thought I'd get a Smith Victory, but this was tough to resist.

ETA: I need to do some serious organizing now.

[Great-Kazoo]

I've never had any .22 pistols, but was aware of the Ruger takedown issue. I originally thought I'd get a Smith Victory, but this was tough to resist.

ETA: I need to do some serious organizing now.

The can's a take down, not the pistol.

I would have went with a can that goes on to a brake, instead of direct thread. Unless that end cap is removable.

[Irving]

We're talking about how easy it is to take down and reassemble the Mark IV.

I also thought I'd get a can that went on flash hider, but ended up getting that one instead. It will pretty much live on two .30 cal guns, so I don't think it's that big of a deal. I think the newer versions have that mounting option though. I'm going to check when I go back in.

[Great-Kazoo]

We're talking about how easy it is to take down and reassemble the Mark IV.

I also thought I'd get a can that went on flash hider, but ended up getting that one instead. It will pretty much live on two .30 cal guns, so I don't think it's that big of a deal. I think the newer versions have that mounting option though. I'm going to check when I go back in.

I had a direct thread, till i realized as most do. They have more than 1 gun they want to use the suppressor on.

There's no right or wrong way when it comes to muzzle brake or direct thread mount. WE (those of use with NFA items) already know it's not the first 30 cal can you'll own.



Regarding the ruger 22/45 there's an aftermarket kit that makes it easier for those who have issues reassembling their pistol. Or want to simplify things

https://www.eabco.net/Speed-Strip-Kits-for-Ruger-Mk-I-II-III-and-2245-_p_13702.html

[Irving]

Cavscout, when will you be up here next? I need to borrow your fishing magnet. I was trying a new configuration in my locker to try and fit everything and managed to lodge a rifle in the way of the locking mechanism. Now everything is locked in there. I've done this before, but usually I'm able to shoulder the locker and knock something loose so I can get back in. That doesn't seem to be the case this time. Damnit.

[Irving]

I had a direct thread, till i realized as most do. They have more than 1 gun they want to use the suppressor on.

There's no right or wrong way when it comes to muzzle brake or direct thread mount. WE (those of use with NFA items) already know it's not the first 30 cal can you'll own.



Regarding the ruger 22/45 there's an aftermarket kit that makes it easier for those who have issues reassembling their pistol. Or want to simplify things

https://www.eabco.net/Speed-Strip-Kits-for-Ruger-Mk-I-II-III-and-2245-_p_13702.html

Well the benefit for sure would be not having to remove flash hiders first, especially using on any of the .223 stuff I have.

[OtterbatHellcat]

Wiring sucks,....but it sucks a little more when you're doing it right.

[wyome]

Did you use a wiring kit, or piecing it together?

I rented the good crimping tool from the wiring kit ppl

[Great-Kazoo]

Did you use a wiring kit, or piecing it together?

I rented the good crimping tool from the wiring kit ppl


https://www.kleintools.com/catalog/strippers-cutters-crimpers/crimping-tools

;)

[OtterbatHellcat]

Heya Wyome,

Kits are good for trailers and such, but all this stuff I'm doing is custom. At least I'm running extra circuits now so I only have to do it once, hopefully. I'm still on the fence about disconnect plugs under the headache rack in case I have to take the bed off someday. Any interruption in an exposed circuit is an invitation for problems later on down the road. I have plenty of good tools and quality materials to work with.

How you doin' man?

[OtterbatHellcat]

Yo Kazoo.

[Irving]

Are you making a schematic as you go for future trouble shooting?

[OtterbatHellcat]

Yes, and everything is getting labeled as well. Since I don't really want to spend $500 for 13 different colors, some circuits will be duplicate colors. It doesn't help I'm putting so many lights on it. Ha.

[Irving]

Are you planning on all LED lights so you don't need like six auxiliary batteries? I've been meaning to redo the labeling in my breaker panel, but it's one of those things that is so easy to just keep putting off. Good on you for labeling everything.

[OtterbatHellcat]

Yes, all the aux lighting is LED and the switches are rated at 20 amps each so instead of having to relay eight separate loads, I'll probably dual relay four switches each and let the switch manage the load which will be pretty insignificant anyways.

sucks a little more when you're doing it right.

And that is what I was getting to about wiring in general. All of it is kind of a pain in the ass to begin with, but if you take the time to properly route, grommet, support, crimp, seal, foresight with extra, and seal some more....etc, etc.

[Irving]

I bet you can fit a lot of solar panels on that flat bed...

[OtterbatHellcat]

I am interested in adding a couple of group 31 batteries paralleled in with the 65 under the hood. Extra battery power is never a bad idea, but I did have to delete the second alternator in order to get this engine to fit into this chassis. If I do that, it would be wise to get a higher output alternator.

[OtterbatHellcat]

I bet you can fit a lot of solar panels on that flat bed...

lol. We actually had an ambulance that had panels on the roof. The Gov wanted to see green initiative in the EMS world.

[Irving]

It's really important to have EMS crews keeping their cell phones charged.

[OtterbatHellcat]

I wanted to add that I'll piggy back load wires in light groups, but every light will have an individual ground. I did take the time to ground and re-ground everything from the body, frame, engine and bed.

[OtterbatHellcat]

It's really important to have EMS crews keeping their cell phones charged.

There was a time when a large EMS provider here in town used cell phones to dispatch emergent calls.

[Great-Kazoo]

I am interested in adding a couple of group 31 batteries paralleled in with the 65 under the hood. Extra battery power is never a bad idea, but I did have to delete the second alternator in order to get this engine to fit into this chassis. If I do that, it would be wise to get a higher output alternator.

A lot of batteries are fine. Unless you live on a road so washboard, you're going sideways to keep the wheels straight.

[Irving]

Well, he probably won't be storing them in a laundry basket or something.

[OtterbatHellcat]

Ah yes, but when the tires are so big that washboard is a non factor, it's a Cadillac ride my friend. ;)

[Great-Kazoo]

Yo Kazoo.

40 east bound coming through Kingman to Ash Fork as the sun is setting, looks like western WY, UT, ID or northern CO. Same damn landscape, beautiful. Traffic on a saturday night consisted of 4 vehicles, 3 of them going the other way. All good on a 1200 mile week of driving till..............



I'm maybe 4 car lengths from a single lane traffic circle. when some fuktatd decides to pass me, as in what the fuk is this moron doing about 1" from my mirror, passing. Coming in bumper close as a NB car slides to the shoulder to avoid a head on.

[OtterbatHellcat]

Well, he probably won't be storing them in a laundry basket or something.

Oh no, a sexy under bed aluminum diamond plate cabinet with a slide out battery tray.

[Great-Kazoo]

Well, he probably won't be storing them in a laundry basket or something.

Don't you have a roof to do an estimate on?

[Irving]

Don't you have a roof to do an estimate on?

I wish. I'm going to go get a part-time job. Preferably hours after 5pm.

[OtterbatHellcat]

Holy crap, Kazoo....I'm definitely happy to hear that you did not have an unpleasant vehicular episode.

[OtterbatHellcat]

Pic link attempt coming soon.

[Irving]

Pic link attempt coming soon.

I wish I could make some sort of work flow PDF or power point to show you how to link those photos better. You're very close.

[Great-Kazoo]

I wish. I'm going to go get a part-time job. Preferably hours after 5pm.

Hang Christmas Lights. Not only does it pay well, it's also illuminating to see how people celebrate the holiday.

[Irving]

I saw something at Home Depot for a night shift stocking shelves. Everyone keeps telling me that UPS and USPS have night shifts that pay a lot. I think I'm less likely to use a discount at USPS than I am at Home Depot.

[OtterbatHellcat]

This pic thing is such bullshit.

[Irving]

https://photos.app.goo.gl/9nZTcRhRB8GKUmb59

[OtterbatHellcat]

https://photos.google.com/share/AF1QipN0a0rA2F-ffGvH35kqYPzw3f3GvPXUKhQGP7bVg4oUd1_bTSjCmrWrjMKqW dsdlg/photo/AF1QipNU2Ld7XMJb9hqhYeVdKc9SVm3_N7XksKaQ91lR?key=a lVacjdIWVdTTmFIWVJzNE14ZFVZRUZ6cXNqalNB

[ChickNorris]

I cant see either pic fellas.

[wyome]

Fail

[wyome]

This truck sounds bad ass.... too bad we can't see it

[OtterbatHellcat]

The frustration level I'm experiencing trying to get this shit to work is significant. But, I am still trying.

[Fentonite]

I saw something at Home Depot for a night shift stocking shelves. Everyone keeps telling me that UPS and USPS have night shifts that pay a lot. I think I'm less likely to use a discount at USPS than I am at Home Depot.

I worked part time at UPS overnights during my freshman year of college back in the ‘80s. Really good money at the time, I wanna say $15/hr back when minimum wage was $3.35. I loaded tractor trailers for 5 hours a night. It was fast, jamming work and the shifts flew by. Slept like a baby after my shift. Probably explains (partly) why my grades plummeted, and the next year I was in the Marines instead of college. I really liked the work for some reason. My wife just started a seasonal overnight warehouse job at Amazon, and similar to UPS, it’s quick physical work that is ultimately kinda fun. If my aging carcass would stand up to that sort of work, I’d be tempted to do it again. I’ve heard bad things about the way HD treats employees, but it’s probably not a tough job to walk away from if you didn’t like it.

[OtterbatHellcat]

https://photos.app.goo.gl/wN1jjxHjooeoNrQz8

[wyome]

I'm sleepy...
I looked at a rifle today and passed on it, ruger American. I might be sick or just sleepy

[OtterbatHellcat]

https://photos.app.goo.gl/8WLCwgy4XZCnxkB76

[ChickNorris]

Hehehe

Need a lullaby ?

[ChickNorris]

I worked for UPS a long while back. Good money. Union.

[ChickNorris]

Link worked

[wyome]

Nice looking truck.... is leaf spring front end kinda bouncy?

[OtterbatHellcat]

https://photos.app.goo.gl/q6BjxhfKNv2r6cy99

[wyome]

Amazeballs

[ChickNorris]

Nice!

[OtterbatHellcat]

Thank you.....right now it is, I haven't gotten shocks for it yet. It only goes from one building to another on the same lot currently.

[wyome]

Good night

[ChickNorris]

I fold too. Night folks!

[OtterbatHellcat]

Nice!

Thanks !

It's not done yet.

[OtterbatHellcat]

Goodnight Wyome and Chick.

[MrPrena]

Thanks to the unexpected nap, I am watching knife reviews on youtube.

[Irving]

Truck looks less ridiculously when not taken from the ground.

I'm in the unique position of not exactly needing a second job, so I'm not as worried about treatment. As mentioned, I'll walk if something sucks. How bad can part time hours be though?

On another note, I've never had a union job, and generally have a distaste for unions as a general concept. Change my mind.

[OtterbatHellcat]

Non union fan camp here.

[OtterbatHellcat]

Thanks to the unexpected nap, I am watching knife reviews on youtube.

That sucks when it happens....especially on a school night.

[OtterbatHellcat]

Truck looks less ridiculously when not taken from the ground.

I tried a different angle on that pic, from laying on a creeper. Sometimes ridiculous can be fun, had a big truck once before, this one's bigger and more neatier/cooler and stuff.

:)

[OtterbatHellcat]

I guess later in my career I can piss money away on stupid shit that makes me feel good, but it's a project that's been stalled several times due to life circumstances. I'm finally getting it done, and that damn truck will out live me.

The kid will probably sell it when I shit the bed, but with a 7.3 in it, he'll get a buyer with a deep pocket I figure.

[OtterbatHellcat]

Hell, he'll get the house, wtf does he care about a truck?

Doesn't matter, he can do whatever he wants with all that stuff. He's a good kid and he works hard, he deserves it.

[OtterbatHellcat]

Ya ever go somewhere in public and conduct business, see a friend, blah blah.....and find out when ya get home you had a huge eye booger in one of your eyes?

I personally don't really understand the eye booger thing, but really?..Damn. Should you check your eyes a couple times a day, or only when you're going to visit with other folks?

Eye Boogers.....mother fucker.

[OtterbatHellcat]

Non eye booger fan camp here.

[ChickNorris]

Good morning folks

[ChickNorris]

I don't use an alarm to wake up.

[wyome]

Me either... but this is too early... i'm going back to sleep

[ChickNorris]

That's funny

[ChickNorris]

Because I can't.

[ChickNorris]

Curious, who has tried Gilpin Guy bacon?!

[ChickNorris]

I would were there some available. Ehem.

[wyome]

Good morning again

[BladesNBarrels]

Adventure is worthwhile.
Aesop

[SideShow Bob]

Curious, who has tried Gilpin Guy bacon?!

I know ,I know.......[pick-me]

[SideShow Bob]

When I return to work, which I hope won’t be too long now, I’m going to need three alarms scattered around the bedroom to get up on time.

[Great-Kazoo]

When I return to work, which I hope won’t be too long now, I’m going to need three alarms scattered around the bedroom to get up on time.

Leave one of the non bedroom curtains or shade open overnight. The sun starts breaking through and you'll be awake.

[SideShow Bob]

Leave one of the non bedroom curtains or shade open overnight. The sun starts breaking through and you'll be awake.

This time of year, I would be at work before the sun peeks over the horizon or just as it breaks the horizon.

[wyome]

At least you would know when you are really really late... and if you're late you might as well get donuts and burritos

[SideShow Bob]

At least you would know when you are really really late... and if you're late you might as well get donuts and burritos

I like your thinking, too bad the rest of the crew doesn’t think like you. They show up late with breakfast on their breath and some lame excuse sputtering from their lips.

[OtterbatHellcat]

We have a rule.....more than 15 minutes late to work, you buy Santiagos burritos for everyone.

[OtterbatHellcat]

...back to herding fish farts...

[ChickNorris]

I know ,I know.......[pick-me]

Do tell.

[SideShow Bob]

Gilpin Guy’s bacon was the silk purse made from a sow’s ear. If you haven’t had any, I feel for your misfortune......... :(

[SideShow Bob]

Gilpin Guy’s bacon was the silk purse made from a sow’s ear. If you haven’t had any, I feel for your misfortune......... :(

In fact, I found a pound a month or so ago that had been buried for untold years in the bottom of the freezer in my garage. I threw it out just to be safe.

[OtterbatHellcat]

Picked up some really cool old locks, hand cuffs, and a U.S. Marshals badge for "The Arizona Territory" today. One of the locks is branded Winchester - 8 lever.

It's kinda neato how the old hand cuffs work.



*edit typo*

[MrPrena]

Speaking of handcuffs.

Peerless vs smith & Wesson.

[ChickNorris]

Hobby eh?

[MrPrena]

^ LOL

[OtterbatHellcat]

The cuffs are actually issued from the Colo Territorial Prison (Canyon City). Found other identical cuffs online from different institutions at similar prices, they're still pretty cool though.

[buffalobo]

Looks like an OSS Elite 7.62, direct thread, and a Bowers Bitty .22 with a Ruger Mark IV to act as a host.

https://lh3.googleusercontent.com/W_R4dFcHTJPttw0I0IhqAC_6zSju98sPdK6ejOAvO_n6b8TtP7 jfuRnEf8sNJ49xZIX9n8hF6UffHSf9m9g1eU2zWxnGwUx5nYLF k-xJgKVeBAsCold-h0ULOPjEkAiN4AxPJBTx78AgeWTQubPQo6Lnf3rQ1NsB2hDW40 nrivNPMZeihXv42vvbaxKTmyLdbnmMGaOKnFZqP8fFP-tjEC1xOlrT6DSNt48iGbDtSkfU3Sx0g93M070EIAfdxgFfcdB0 Pp2r1Xzd-nB-tdSzIkdN_Nl1hLTD4p69bATkO-sKr5lA-F70Wdm-2WqzHK_Azp8mKM_X_7mT5F9Oly8pNFmvDo2DR4qJ_NXMdeA8n8 dv3ymSnU6qJ9FcWyg3GOq4UuiRe8wAz-3bLGaAOvYJX9LzpdTyseMVCfenCbK0ZZATbHBi8hbYstTsQmNy jpOZ4IMEiKMHAqddopt2HNnuDrjZR5tJ2CxE2Y2XCIwzqVUnt7 jdFVJxIToxyYZxzYaC1MuvsUKI8FcPKIfoxu32dlp_AGvhM3F-mcZ1geHs3iypHC6s24NbQXNHWdLFZGFRDqjA52KfaaXnbExx12 PCT9dbKqZ6vWuY5YShdVPKoND85Y9AQ3-fH7__B4s_KBIEYgC88k5UMrlna0YlLuuDul2cYrd7SPSRAyK2G ivm5SoM6Qk-L5M9QQjyXyVZJp_D2l0hGb2u3uFCwhLfR60=w715-h626-no
https://lh3.googleusercontent.com/DK7yMnSWaHdwbsSiZq_Q_e1cnQJ6cUdEhzx4hKr0Lz51OhRHft 1EznA0Q1u88WBQMAkHvGzwvgPrMIBIFnWGY99h8piqraLtY1yL ZgckbQPwMixhZdzHDS27cRjqEaCSMbfRxjkaVl5XL2xp7_4qDH vaVMnUsyrZ7uwBArPADdUxrvinbQKg7zUav6TH8grbLyCaJcAD PtHF-58eIbEeLpx7TyGKl17RlArmDOTyHZPH35W4RQkx75fU8g2NbKD 283-ZYoaBrvjGb9CvZJQILqfTqsdtC8G2wjBYbWp20uc4WvfzPxRxs gXT-Z1n2AfrA3HQ_UryFy2F-aI0-y7UjFdrIWkI4mfPPKaFskOnTw4em3Jds5hTeMxYrSHN0FI3_Xo jAKqfdhdLOWePJoosgpBn7p9-c0JNq45i14iPllIY57YbiECPfzFR9C0DE2RQApyQevRHBJvZf6 GUMNTWOaxzU9apVIGpceOzZxrHvYYzae6PbhV4SdsKIt6H6YQa VIyh_udqe5N-QZYFHtvU07zNljysXTAK5gQ7mvDduG2yXFIbRIf3dLTI9T_Grt nS3a8iA0iB-PkFG67OJZeb4a42VNxBsEyDkhmdtHoKQNh5-l7d9NjaKnqzewe4jWm9Gt4YvGDxgc9YxtGGIBg9IMtO9VJPt5r dTkmVxrOLKhYbpRmQKCqoKVuu0ReW-1SBrtyNENVX5xRey-VY0y0=w1113-h626-noMinion #3 was lobbying hard for that Ruger with the Bitty.

That Elite would work perfect on my new RPR.

[Irving]

I'm pretty excited for that .22 can to come out of jail.

[ChickNorris]

When's that?

[buffalobo]

Between Independence day and Labor day?

[buffalobo]

Of 2019.

[Irving]

When's that?

Not sure, haven't even submitted prints yet.


Between Independence day and Labor day?

Probably this.

[buffalobo]

I would really like to get started acquiring a few cans but still have a couple guns I have to get first.

And finish getting RPR rigged up.

[buffalobo]

Irving are you reloading 308?

[buffalobo]

What you planning to put Elite on?

[Great-Kazoo]

Picked up some really cool old locks, hand cuffs, and a U.S. Marshals badge for "The Arizona Territory" today. One of the locks is branded Winchester - 8 lever.

It's kinda neato how the old hand cuffs work.



*edit typo*

They open with a key, or you have a safe word?

[ChickNorris]

I want a socom556-mini2 for my rifle.

[Irving]

I would really like to get started acquiring a few cans but still have a couple guns I have to get first.

And finish getting RPR rigged up.


Irving are you reloading 308?


What you planning to put Elite on?

I'm getting close to the point where I don't think I really need more guns. It really helps that I can't fit everything in my tiny locker anymore anyway. Plus, I've never had any nice/usable accessories, so I'll likely focus on that stuff for a while.

I have all the stuff to reload for .308, .300blk, and .223, but just haven't jumped in yet. I really need to do that as I'd really like to up my rifle game in the very near future.

I'm putting it onto my Savage Axis .308, .300 blk pistol, and I've got a few .223 ARs that I'd like to start shooting as well.

Since we haven't submitted for this exact can yet, I'm going to see what my options are for getting the newest version, which is the QD version. I was being obstinate about having a serviceable can, but now that I've had a few days to actually do some research and familiarize myself with what I'm getting into, I'd prefer the new QD version. The new versions of this can are non-serviceable, kind of. The directions for cleaning are to soak for 24-48 hours, then just shoot all the gunk out. Since it is a flow through design, everything just blows out the front.

Check out this video.


https://www.youtube.com/watch?time_continue=38&v=20s4Tk_S_34

[ChickNorris]

Exactly. I was thinking I might get to enjoy it next fall if I buy it now.

[Irving]

I should draw for antelope next year, and now that I know how easy it is to get an OTC rifle tag for elk, I'd like to do that again as well. Hopefully the big one comes in by that time next year. I think it should.


I want a socom556-mini2 for my rifle.

Now that I've watched a bunch of videos, I'm interested to see how this can runs on my AR rifles. I've never shot a suppressed AR so I have no comparison for blow back experience, but I'm eager to check it out. I wonder why that mini costs so much. I bet it's cheaper through dealers.

[Great-Kazoo]

I should draw for antelope next year, and now that I know how easy it is to get an OTC rifle tag for elk, I'd like to do that again as well. Hopefully the big one comes in by that time next year. I think it should.



Now that I've watched a bunch of videos, I'm interested to see how this can runs on my AR rifles. I've never shot a suppressed AR so I have no comparison for blow back experience, but I'm eager to check it out. I wonder why that mini costs so much. I bet it's cheaper through dealers.

You'll get a moderate amount of blow back, there's vids out there showing how to minimize it. You definitely appreciate good eye protection after a few mags, if not sooner.

[Irving]

I've seen zero references to blow back with this style can. I've seen some stuff about it not being as quiet as others though. The more I read, the more I learn about all the changes that have been made and even more strongly want the newest one.

[CS1983]

Gas buster charging handle will help somewhat. But yeah, eye pro is your friend (which it is anyway).

[ChickNorris]

Hi folks

[ChickNorris]

Mrwhiterabbit?

[buffalobo]

Naw man, Dave's not home.

Down the rabbit hole and all that.

[ChickNorris]

I see.

[Great-Kazoo]

Learned a new saying / word phrase the other (Arizona Pinstripes) day when i commented to a truck owner i liked his 2 tone bed liner paint job. He said it was either bed liner it or live with the Arizona Pinstripes scene he had underneath.
AZ pinstripes? Yeah you go off road more than once, or have friends who don't trim back their driveways, you'll get them too.

[Irving]

That's a thing in every off road community.

[CS1983]

Down the street neighbor just delivered MY FREAKING SUPPRESSOR. That USPS left at the wrong address after it came back from repair work. Sheesh.

[Irving]

Talk about blow back.

[Great-Kazoo]

Talk about blow back.

Quiet

[Irving]

Apparently I need more sleep. I just got my passport photos and I look like a criminal drug addict.

[brutal]

Down the street neighbor just delivered MY FREAKING SUPPRESSOR. That USPS left at the wrong address after it came back from repair work. Sheesh.

Proof that mere mortals should not be allowed to own such devices.


[Sarcasm2]



Honestly, that's on the sender for not requiring a signature, or did the neighbor sign for it?

[CS1983]

No clue.

[ChickNorris]

Ive had regulated items with customs & explosives labels mis-delivered to my neighbor. Bit unnerving.

[ChickNorris]

Apparently I need more sleep. I just got my passport photos and I look like a criminal drug addict.

Can't be as bad as mine.

Handheld. The girl was near two feet shorter than me & was standing too close while i was looking straight ahead. Looks more like i was at the doctor's office for a sinusitis diagnostic than an identification photo.

[Irving]

Did you submit for some goodies? Or some other purpose?

[ChickNorris]

Did you submit for some goodies? Or some other purpose?

Asking me?

Yes

[CS1983]

Scored an unused-as-far-as-I-can-tell $170 archery release (T.R.U. Ball Boss-x) for $27 inc/tax from the pawn shop. What a score.

[ChickNorris]

Whoot!

[OtterbatHellcat]

Howdy.

Got the drop receiver today and partially installed. Still need to drill four of six holes and do some welding on it. Looks pretty good and is gonna be strong as shit.

[Irving]

Need to do some painting, and going to try and jump into rifle reloading this winter.

[wyome]

I get neighbors stuff all the time...never crossed my mind to look and see what they got...just look at the address, and then walk it over...I must be missing out on some good loot

[OtterbatHellcat]

I get neighbors stuff all the time...never crossed my mind to look and see what they got...just look at the address, and then walk it over...I must be missing out on some good loot

This..^^^^ You don't open shit that doesn't belong to you. Read the package before you open it, and if it ain't you, give it back to the delivery folks..... or take it where it was supposed to go.
I exercised this practice many times. Respect for someone else's property.

[Irving]

I feel like with respect to non-gun purple, a suppressor only looks like a suppressor in the context of being attached to a gun.

[Great-Kazoo]

I feel like with respect to non-gun purple, a suppressor only looks like a suppressor in the context of being attached to a gun.

Would that give you a purple people beater

[CS1983]

As far as I can tell, the neighbor didn't open the package. Looked to be original tape job.

Looked at the tracking number (which I had not received to track). No signature was required, or at least if it was the glorious USPS didn't attempt one.

It wasn't even a transposed address issue. It was just straight up delivered incorrectly.

[ChickNorris]

Hiya Folks

[ChickNorris]

Tap tap tap...

[ChickNorris]

Not even a cricket. Dang.

Nighty night

[OtterbatHellcat]

The hitch is ready for welding and probably get that done tomorrow sometime. Ground, but airborne powder coat tastes unpleasant for certain. I can say that Curt hitch products are powder coated well, I had to work at getting it off.

I thought about painting the whole thing when I'm finished with it, but I think I'll wait to get the bumper back and see how well they did it. If they did a great job on the bumper, I'll probably just send the hitch and the custom nerf bars (next project) out to them and get 'em done proper.

[Irving]

Not even a cricket. Dang.

Nighty night

See you at 3:58 am!

[Great-Kazoo]

This is a test

#1: Mailing address

25or624 main st anytown usa.


#2: Physical address

not2hard ave
anytown usa.


I pay you for something and indicate Use My Mailing Address. You send the package to ???

[Irving]

Your email address?

[SideShow Bob]

I think Kazoo is suffering from early frybrain syndrome, it tends to happen to everyone in AZ. sooner or later.

[OtterbatHellcat]

Only if you're in Phoenix.

[Great-Kazoo]

I think Kazoo is suffering from early frybrain syndrome, it tends to happen to everyone in AZ. sooner or later.

Honestly i wish it was that easy.

Every bank, ins company, health care, check books even the fuckin FEDS. all send shit to the physical addy.. Even after telling them by phone, a fax, email and snail mail letter DO NOT USE ANYTHING BUT THE MAILING ADDRESS!

Called the ATF today to see where my 5320.2's where since it's been 30+ days. WE sent them to (you guessed it) [facepalm]the physical addy. day 2 after i submitted the paperwork.
Well guess what maroon, i Clearly indicated what address the paperwork goes to AS Per your Help Desk. Well sir submit it in writing . Submit it in writing, how da fuck will that solve anything when you can't get it right electronically? Also who exactly has my information since you don't know where it is. Umm Ummm yeah i thought so. Time to back channel it through the nephew.

[ChickNorris]

Maybe try the designations: Billing & Shipping

[ChickNorris]

See you at 3:58 am!

Close, 4:24 ish

Odd. But what isn't.

[wyome]

I dunno

[ChickNorris]

Why not ?

: p

[brutal]

well shit.

Wiring up a new smart switch in a double gang box and I smoked the existing one pushing wires back in hot (yeah, I live on the edge.)

NP, I just grab one of the other new switches I picked up and it no worky (in the same 3-way config), WTF?

Turns out the new and old switches work different in 3/4/5-way setups. Now it seems I let the smoke out of a new switch using it the same as the old. Relay switches internally but nothing out the load or traveler terminals. Fawk...

Screw this, I rewired that 3-way back to a standard traveler setup and put manual switches back in. I'll figure it out later.

(turns out that with the old model switch, while I had to re-wire both ends and use neutral on the load end as the common to make it work, the new switch is more like a standard 3-way that just uses the same line-common to load-common remote, traveler and just picks up a neutral from the neutral tie at the line side switch to energize the smarts.

[Irving]

well shit.

Wiring up a new smart switch in a double gang box and I smoked the existing one pushing wires back in hot (yeah, I live on the edge.)

NP, I just grab one of the other new switches I picked up and it no worky (in the same 3-way config), WTF?

Turns out the new and old switches work different in 3/4/5-way setups. Now it seems I let the smoke out of a new switch using it the same as the old. Relay switches internally but nothing out the load or traveler terminals. Fawk...

Screw this, I rewired that 3-way back to a standard traveler setup and put manual switches back in. I'll figure it out later.

(turns out that with the old model switch, while I had to re-wire both ends and use neutral on the load end as the common to make it work, the new switch is more like a standard 3-way that just uses the same line-common to load-common remote, traveler and just picks up a neutral from the neutral tie at the line side switch to energize the smarts.

Oh man, what a stupid idiot.

I feel like if I don't put in this smilie, the thread will implode (even though it probably wouldn't). ;)

[ChickNorris]

Night folks

[ChickNorris]

Extra smiley just to be sure

:)

[Irving]

Did I already post the Christmas animals? Sorry if I have.

Ugh, sorry for verticals, I was taking them for Instagram.
https://lh3.googleusercontent.com/vOhjcF5o4EwQ9ENLRJ2Q7iJFsDZqgsTq-Y2AAGPeTmB-Hy54EV9xYEdObu83IRgr1OJpdoJ3epvmcPnZmHxTuuNjyXc3SD 8BGcAnjiz97XEJHf6GcuRbjyICr473NLpluWsqNwvhEt6ThuZL s7jRLrCPoNCdMWEn8TuxonWBx_im3j1b19v55FiZgTmVrABPMD QGgG2Gj73xk5mK-d5w8EsAYMWqZvCgHZSGa6Ys0BmYatlkKS9_AtGNXY5thu5EXQr oC6qHLsUp6sEyAlzsnTHL1p3ivW4zW1z706KA5BkUi1l4WwKGL LkMVtoKbsYFyzll2fvvuA0eNtlCRk80be41Mj6Zml8jA9B1umt 1kgU6zQ0a5nnHP3WOV1oQjyH3JFlfus8Rojt8K2puiyouZqOCg JHfohwJIr_lHSaIKI4dAwrrOx-Q6GwltFBVzbCbnk81I3mDDByQkYPKy0Qo29_jMdzdOha37DYsS qbP14ojygODGkuO7rSNbo05Nuu-L7Jq5VsNYH_ssI9yp-t7j8xqXYhzaoUJY4nSTTyIoq0Rwzska06I573ghDmsLSZDAC_l 0e6bQVokUDZoromiHugX_6kD4m_SoVHYttaJXTVh5PMKZ0ttXg TSNLIcATvknp6_WXjJQcWCZ9mPBIcuvEGf6VzVdSbyOjhj-0rqBPjwaSthDaj47OG8M2R7hX_QyK0xxfdjXUTqghkW8KI=w35 3-h626-no
https://lh3.googleusercontent.com/fYtWpperFVYJctUXHQ11Jt4kdvmkO8r850YurhKzadHtkS8K5F xCMGWcPOOa7ATvX-dg5QTDEcYMBIqj2f7JY1OlnvkSRmbFfFWN8yhKYx_N-c6JRic9NUciGNZxCyypzDhYVC-zefz7sbhXpNaG9MND3Sec1-gxXu1WbyruXxK-gSijfhilZsh-hIKP9sAzNoGvF5z34MOqCVETzgFIpW9hkpw7xPoKB7ZiwQINxL 0JNs3Tk6RPkywGVDlwjqmiyAoEBlIbOyqtph2_OrQ10ClyPH6G Bhq-TZvU_EQOF5wjdnsba0yRZO1r8-pEUliIgH125Nl6kqMaOS93hkHG0wbZPW9BHCfh6wsZEQ_zZjc8 4ksZRd9sYyd3BZc_aqpDd8umFAHxrmWD2vi3oKNw7WSDSw27p8 dO9iwqErVhP0ecK1TtnuQuxFRFx0_nZ0hAaW_71eK3JCHS4jZ4 Uk70IgfcgeRoj71zOo4otQv3X2OVCz7sxrDTtIZVF7ZvjVptl2 bKQ1vKM9WNKkf7wPPf_SJ5Ie4YPIZV5Q0kvoioYJRocRF82umw PL66FcLzB50eN-MJL4rqqOSXB9bqt4k7tdkjPFbkfauEoupTA0JuOXSoS7xP8__0 IGqObm5kRf0FhetwmG1yEpW-Bg9jx5fO1jUgxpDO60GH2KpA0epcq_bfUMr6GyTYk4RovPanLt Qb-wIykUi5IVuq_nAazOI=w353-h626-no
https://lh3.googleusercontent.com/0F2W6UEAB61zt75PuMRRud2xYRiafApJRt0glqnWORYpD4slZP lpp_5C9Mcryw29I-CwWcbggygEPNBgN5H4CxH3PStjwqKUYusdZRsd9BGcKFkNX1ss cYt4-3YwAPr3Itg1NHvs5R37FSWt6KOz0KBOWkbwCwJtjeqN2o--z34EMj_Iozk0P-I9jPXqdkfOfjbcCAnDofRuGrzVaQ1Jkc2hXW0wEivowcE-p1pQQrTJXdlon0ConJfkqL4TP4_iidoFG2Dki3QGIPlXZpSMje eO-KDL1jLaYrxAxxnlW-bFa8PFbjLKfH6r6PReUpTaEOK1srPdc4bRCj5pWB2A2u4RW4cq TKgE3AK697_lHux4KVOB6WxhqFx-Jwj52SzWx6CR13CLV7SnMVJoqtZ3HGmRz2BeLGxtvPZnJS3KhL SLm25Bnq4j9ywStAVk_aN_cT1GFEIkshx8oi6A02wnPba35hHc VmgOowNjUp7AVFwgB6phM-4w3JOSnhlXWyGgdKilfyNCS06ETB4jMIp4M7tGTWxLgmUmvnyx 7Sihte1232DhZMhQgq7l0txaNmSEDoD6irEQ_HIUZdP_eTzXAY H5jyNRHVAQHzJ439xIu9wOx8HO543iJp4XQKWuCkwpv-hCUeHZlAa6BVuapDLGlHSY45GqsJ4hdEMewP42vV0XPrIWuMAK W7oJCWSSMgKXuJpgY6X8bnUTQR2Ent0=w353-h626-no
https://lh3.googleusercontent.com/wsGNeya2U4ty8PPOEkva14aMuniLb_-j4wdyyyEhGmQ2KEZTAyO7zXDJCrthZt_ug-x9MOUiv9XPtlEkjvqDstrvXcnUvZA-qxeBJIjR_tz_EeXfCss9H0s078WPEAr6UXdVVb2S4DUufJ5zCk TtMrZb_E16H9ZFp2lMtZ00oH1XxHFngjPM_ijvrw_PYhPJIdY2 pWk_3M-xgxXW3FUUWt7ajEQbBQHdjCncsP6YJLQdTV9Ar05o2EqiKoZQ0 n557p8or-iMClyCioh-s-AKfY_Zpte7ApJqdsdkYAN_H7_F-owAjc3OoZZ0EdwF9dccJRuptMyE3YWP9bUz9qRpjGNNQhdPzMx ZgMYR5XKkLIzIsmP2sy7ai_nTbGXfVVQnNDNXkosUbl3HpxtFd YYu5NIpp4husacl5C7vidAHuEKC8zp-iGLyrCdxjCymtZ2FDgRZvChLefqqB6pWO_VDfMI4NM_SNnCjbn 1AQwcwhFvZa1KP1lOBkdSjX2nLLxZXqoasIDAIPlS2zgUzZ9fD BXPX3IACVwoD_MbJB28X0GcFl1-DgkHdmWM5qvbASBPf4g7iItIscoXasCy5bC6sNiJQ0qdw00Yo8 yeecMmxPhglEOfX421k4X5fj73e9JMYzE-IwUnawKU0TsEWAsmL8GAKafrLgDoeaL-CipvRCfWLjgWl7lTc7QRMMlNY0--wA99pc5vZLZNiycfUzP8=w1113-h626-no

[Great-Kazoo]

Night folks

Nite John Boy

[Irving]

Don't call me Doc Boy!

[Irving]

Of course this happened in Missouri. Just for you Foxtrot.

https://www.nzherald.co.nz/world/news/article.cfm?c_id=2&objectid=12168253

[ChickNorris]

Folks

[ChickNorris]

I was in the neighborhood yesterday & bought a goofy tactical xmas stocking @ Ark.

[ChickNorris]

Looked at Stabby stab stabs too

Mmrrruugh

[ChickNorris]

There is a squirrel in my tree....

[ChickNorris]

Not anymore

[ChickNorris]

Ta

[SideShow Bob]

There is a squirrel in my tree....

I’m sure the saying is “bats in the bellfree” , but “squirrel in my tree” gets the point across........ [Tooth]

[ChickNorris]

Clever

[SideShow Bob]

Clever

No, Cleaver......

[ChickNorris]

Too clever by half, now


Ba dumm tss

[BladesNBarrels]

Of course this happened in Missouri. Just for you Foxtrot.

https://www.nzherald.co.nz/world/news/article.cfm?c_id=2&objectid=12168253

From the article, "Prosecutors say the victim was dragged for 17 metres under McKeown's car as she allegedly tried to flee the scene."

Made me think, what? Realized it was a New Zealand source. Ummm, what again?
Is this the type of reporting that New Zealanders (Kiwi's in the slang) want to see from the world of the Yank's?

[brutal]

Oh man, what a stupid idiot.

I feel like if I don't put in this smilie, the thread will implode (even though it probably wouldn't). ;)

[ROFL1]

[hurley842002]

Armed ANTIFA perhaps? https://uploads.tapatalk-cdn.com/20181129/977cd177e39942cc8f6f58bc32346310.jpg

[CS1983]

Or ultra conservative.

Horseshoe theory is strange.

[Irving]

Armed ANTIFA perhaps? https://uploads.tapatalk-cdn.com/20181129/977cd177e39942cc8f6f58bc32346310.jpg


Or ultra conservative.

Horseshoe theory is strange.

Obviously a fuckin liberal.