Tapco Intrafuse SKS stocks

[chshrct]

Hi all,
So I ordered an Intrafuse stock through the local fun store, and while I await its arrival, I was hoping for some info from those with experience. How difficult is installation? Will I need any special tools? Also if you'd share your general experience with the stock, I'd love to hear about it.
Thanks,
NICK

[GunsRBadMMMMKay]

It's easy. You'll need a 10mm socket and extension to put the handle on, and a couple screw drivers come in handy. If you got the kind with the rails you have to install, then you drill and place them on wherever you want but I found out on one of mine that you should check for clearance from the barrel first lmao. I can't remember if the butt stock needs bolted on too, it's been a while.

[chshrct]

It's easy. You'll need a 10mm socket and extension to put the handle on, and a couple screw drivers come in handy. If you got the kind with the rails you have to install, then you drill and place them on wherever you want but I found out on one of mine that you should check for clearance from the barrel first lmao. I can't remember if the butt stock needs bolted on too, it's been a while.
Cool thanks for the info, friend. I'm still waiting for it to arrive, can hardly contain myself.
NICK