PDA

View Full Version : Rifle bolt storage



cstone
05-24-2011, 21:48
Does anyone else store their bolts removed from the rifle? I'm just curious as to what you are using to store the bolt.

I've used a flashlight holder from a duty belt and that has worked ok because it lets the bolt handle rest outside like a proper bolt holster. My wife made a very nice quilted bolt bag for my AR bolt carrier. Its not the type of thing you see in the average shooting accessories aisle. I thought I'd ask here to see if there are any ingenious or really different ideas.

Irving
05-24-2011, 21:50
Do you store them well oiled like when you buy a new gun from factory and it comes wrapped in that oily paper?

Colorado Luckydog
05-24-2011, 21:57
I store mine in the rifle where they belong.

rondog
05-24-2011, 22:05
I store mine in the rifle where they belong.
^This.^

cstone
05-24-2011, 22:25
Do you store them well oiled like when you buy a new gun from factory and it comes wrapped in that oily paper?

Method of storage is a personal choice. I have a small safe for pistols and the bolts store nicely in there. What I keep outside of the safe is a different issue.

After cleaning, I apply a light coat of Tetra. Never had a problem with rust. I've also never received a new gun in oily paper.

rondog
05-24-2011, 22:29
May I ask why you remove the bolts? Just seems kinda odd.

Ridge
05-24-2011, 22:35
May I ask why you remove the bolts? Just seems kinda odd.

So that if the government tries to use your weapon to frame you for an assassination, they can't. Swap the bolts between guns, even a micrometer can't tell...

rocktot
05-24-2011, 22:39
This is why my dads old Stevens 22, won't shoot too well...[Rant1]

mutt
05-24-2011, 22:41
May I ask why you remove the bolts? Just seems kinda odd.

I'd like to know as well. Is it an extra security precaution to ensure the weapon is rendered harmless or is there a more practical reason?

cstone
05-24-2011, 22:43
Mostly out of habit. I have always kept my guns where only I have access to them and I can use them.

I have personal experience with children who have been seriously injured when a weapon was not stored properly. It has made a great impact on me and guided my choices on how I choose to store my weapons. For me, the safest place to have a weapon is in my hands pointed where I want it pointed. If it isn't there, then I store it as safely as possible. Again, this is a personal choice and I respect the choices others may make.

KevDen2005
05-24-2011, 22:43
So that if the government tries to use your weapon to frame you for an assassination, they can't. Swap the bolts between guns, even a micrometer can't tell...


Only after you are approached by some shady dudes in your mountain home and you recruit a rogue FBI agent to help you because he is the only that believes you

mutt
05-24-2011, 22:46
Mostly out of habit. I have always kept my guns where only I have access to them and I can use them.

I have personal experience with children who have been seriously injured when a weapon was not stored properly. It has made a great impact on me and guided my choices on how I choose to store my weapons. For me, the safest place to have a weapon is in my hands pointed where I want it pointed. If it isn't there, then I store it as safely as possible. Again, this is a personal choice and I respect the choices others may make.

Right on. Figured safety was the primary reason.

lead_magnet
05-24-2011, 23:06
So that if the government tries to use your weapon to frame you for an assassination, they can't. Swap the bolts between guns, even a micrometer can't tell...


Werd...

But really, this is all new to me, what the hell is the point in taking the bolt out of a rifle?

DD977GM2
05-24-2011, 23:08
I keep all my firearms in a their proper configuration. I store spare bolt carrier groups in a double ziploc bag with oil so if the one in use has a malfunction I can take the spare and drop right in. All firearms are loaded. Rifles have no round in the chamber except the Garand and Shotgun. All the pistols are loaded full mags with one in chamber.
The AR next to me as I type this has one in the chamber and safety on. BTW all the firearms witha round chambered have the safety engaged.

For the record I have 4 kids....14,13, 10 and almost 5. They all know proper gun handling procedures...with exception to the 5 year old who knows its only ok to touch "Dad`s" guns when we are at the range or cleaning them. The older kids really could give 2 shits about the firearms and rarely ask to habndle them unloaded since we shoot so much and I have not kept firearms a secret from them. Also I have Col. Cooper`s 4 rules to firearms posted all over the house and kids have to reread them once every 2 weeks or so. They are all very safety conscious and if SHTF I can count on them to take out the zombies when they come a knocking.
YMMV.

ALSO anyone one who has shot with me and my kids have commented on how safe my kids are and their muzzle dicipline is better then most adults.
IMHO Safety is something that is continually taught and something like removing a bolt is a great idea but that can breed complacency for people who "know" the gun is safe and treat it diffrently then if the firearm ALWAYS has the potential to fire a round.
I was a line Gunner in the Navy and also taught shipboard tactics and security and the lessons I taught the crew on firearm safety has done me good in civilian world with my family.

cstone
05-24-2011, 23:09
The whole rifle will not fit in the safe. I don't want to buy a large safe. Only I have access to the bolts for my rifles.

cstone
05-24-2011, 23:16
I keep all my firearms in a their proper configuration. ...YMMV.

This is a personal choice. I wasn't looking for a debate over how we store our firearms as I believe that has been discussed before and ultimately it is a decision for each person to make as they see fit. There is no correct answer as long as you can live with the decision you make.

I was curious as to whether anyone else here stores their bolt apart from their rifle, and if so, what they keep their bolt in.

I'll take my chances with the zombies [ROFL1]

DD977GM2
05-24-2011, 23:31
This is a personal choice. I wasn't looking for a debate over how we store our firearms as I believe that has been discussed before and ultimately it is a decision for each person to make as they see fit. There is no correct answer as long as you can live with the decision you make.

I was curious as to whether anyone else here stores their bolt apart from their rifle, and if so, what they keep their bolt in.

I'll take my chances with the zombies [ROFL1]

The best storage Id suggest is drill bit or mill bit containers that are plastic and screw into themselves(if that makes sense) but they are durabl e and are relativly leak proof if you keep a ton of oil on them for rust prevention.

cstone
05-24-2011, 23:37
The best storage Id suggest is drill bit or mill bit containers that are plastic and screw into themselves(if that makes sense) but they are durabl e and are relativly leak proof if you keep a ton of oil on them for rust prevention.

Like a paddle or butterfly drill bit container? That might work nicely and they are fairly inexpensive. Good idea. Thanks.

Guylee
05-24-2011, 23:37
The best storage Id suggest is drill bit or mill bit containers that are plastic and screw into themselves(if that makes sense) but they are durabl e and are relativly leak proof if you keep a ton of oil on them for rust prevention.

So do you think if you were to put some PVC together with one screw off end it would work like that? (even though having sealed lengths of PVC in your range bag might look bad...)

In the spirit of the thread, the only time I took the bolts out of my guns is when I was leaving them out for some reason and there were people in the house other than my family.

Byte Stryke
05-24-2011, 23:44
Hey, Lets argue about carry condition of your pistols next...


[Bang]

cstone
05-24-2011, 23:49
So do you think if you were to put some PVC together with one screw off end it would work like that? (even though having sealed lengths of PVC in your range bag might look bad...

I know what you mean about the PVC with threaded ends, although galvanized pipe looks much more authentic [ROFL1]

It would need to be pretty thin PVC otherwise the container would be heavier than the bolt. Something to look for the next time I'm in a hardware store.

Guylee
05-25-2011, 01:21
I know what you mean about the PVC with threaded ends, although galvanized pipe looks much more authentic [ROFL1]

It would need to be pretty thin PVC otherwise the container would be heavier than the bolt. Something to look for the next time I'm in a hardware store.

Maybe you could make one for every bolt, and then strap them together and make them a vest for easy carrying? Better paint them red though, just so nobody gets the wrong idea...

Hell, you could even stick a clock on it so you know what time it is, and keep a quick release button in your hand! Now THAT would be a good setup.

GEDIT: Here, something like this:

http://i281.photobucket.com/albums/kk203/guylee_2008/in_bomber_1.jpg

That guy knows what I'm talking about. Maybe I should patent that!

BPTactical
05-25-2011, 10:36
Hey, Lets argue about carry condition of your pistols next...


[Bang]

1 vote for ByteStryke carrying in Barney Phyfe mode-empty gun but 1 round in the pocket-Andy will issue additional rounds as deemed necessary.[Coffee]


Nothing wrong with storing the firearm without the bolt in. If that's what works for you then so be it. Quite a number of sizeable collections are kept that way.
The mill/drill tube will work but they are not very leakproof. You might try HobbyLobby or similar-plastic tubing with the vinyl slip caps.
I have just used freezer bags with a little 30wt oil in the past.

cstone
05-25-2011, 18:37
1 vote for ByteStryke carrying in Barney Phyfe mode-empty gun but 1 round in the pocket-Andy will issue additional rounds as deemed necessary.[Coffee]


Nothing wrong with storing the firearm without the bolt in. If that's what works for you then so be it. Quite a number of sizeable collections are kept that way.
The mill/drill tube will work but they are not very leakproof. You might try HobbyLobby or similar-plastic tubing with the vinyl slip caps.
I have just used freezer bags with a little 30wt oil in the past.


Thanks Bert. I was looking at the plastic tubes and slip caps after the drill bit suggestion. If I find one, I will probably cut a notch in one end for the handle to stick out. The bolts normally go into the rifle when I pull them out of their case before shooting. They get cleaned after shooting and would go back into the bolt holster/tube with a light coat of oil for storage till next time.