Itahaca Model 37 Featherlight 12 Gauge

[CUatTheEnd]

While cleaning I tightened my yoke too tight and cracked it [Bang] (plastic of course), and the only Yoke I can find for this gun and model is for the 20 gauge. If the chambers are the same size (2 3/4") will this work on the 12 gauge? Was not sure if this was for "general discussion" or "shotguns" section? Any help would be greatly appreciated.

[BPTactical]

I highly doubt it. Chambering is irrelevant in this case rather the diameter of the barrel is the critical dimension. Naturally the OD of the 12 is going to be larger than the 20. One from a 16 MAY work but you will still have a difference and with it being plastic that is going to be problematic.
I will check a couple of sources I have and see if I can find one or I can always machine one for you.

[CUatTheEnd]

Thanks, I may have found one, there is a link (a little sketchy though) that says they are no longer in business and need to get rid of their inventory. I'll keep looking, but let me know if you find anything. Appreciate the response.

9:00am - Crazy thought, I called Ithaca and ordered one. $10.50. That works!