Just finished 80 rommy g

[zteknik]

8025
I just finished an 80 rommy g friday,and just had the camera today

Its an all matching number kit with the paper still in the barrel
I picked up a bunch of kits when they went for $75 or so depending who you got them from(and I forgot who i got them from[Tooth])

This one was stuffed in a box of other stuff that i just recently pulled out of the closet

I used an akbuilder flat and rivets
Finished her off in maganeese park.

All headspaced and ready for a test run.I might have to wait till next weekend to get out to test fire.There isnt too much for free ranges where I'm at and there usualy member first ranges.So i have to wait for my buddy so we can go up to his property

[StagLefty]

Nice job !!! [Beer]

[blacklabel]

Looks great. Nice work.

[jreifsch80]

Looks awesome Bob, I especially like the russian bakie ;)

[zteknik]

Thanks guys!
Sooner or later I will figure out how to use this dern camera!!
It has so many different settings and such i just might have to go to tech school just to learn how to use it![LOL]
But when I do figure it out I'll post up some pics of a few of my personal favorite battle rifles-Garands and Springfeilds![Coffee]

[jreifsch80]

hey Bob, do you still have a good source for those 7.62 bakies?

[spleify]

Very nice!

[zteknik]

hey Bob, do you still have a good source for those 7.62 bakies?
Not at the moment-looks like my source has run dry :(
I have a few other guys im going to try when I'm able to,but there no way near in price as my last guy so i might be stuck with getting them off the boards for now-the prices on the boards would be about the same when you throw in shipping from the other guys
We realy need to get Bogdan off his duff!!

[zteknik]

Ok-time for a range report!!! :)
I took her out today
First batch of ammo ran fine-1 30 rdr it was the pre wolf ammo that came in the white box,I honestly cant remember the name-but I think it was military,had the sealed primers and neck
Then I swithed over to the wolf ammo-thats where i started to get some jams and feed hangups

I took it apart and noticed my trigger pin walked out of the hole a bit-the retainer wasnt in the slot-so i popped it back in making sure the retainer was snugin the slot-its one of those one peice ones that the selector lever goes thru the top hole
I lubed up the feed ramp a bit-felt a little rough-then locked and loaded another mag
Lo and behold it ran like a sewing machine afterwards!!!

I realy wasnt checking for groups as much as i was for function,now it passed the break in test-musta ran about 150 rds of wolf after my first mag without a hitch!!(and even bump fired a full mag!:) )

Next its time to take her out for sighting in and grouping @100 (grouping@100) yrds
I'll try and post up the targets when i get it out again

[jreifsch80]

Sounds great bob! What fcg are you using? Tapco? Zach spezialny? No wonder I haven't heard from you this weekend, we need to catch up sometime, I need you to help me source some dirt cheap type 3 pattern barrel parts for a K.I.S.S. Type 3 pattern tabuk style build



Ok-time for a range report!!! :)
I took her out today
First batch of ammo ran fine-1 30 rdr it was the pre wolf ammo that came in the white box,I honestly cant remember the name-but I think it was military,had the sealed primers and neck
Then I swithed over to the wolf ammo-thats where i started to get some jams and feed hangups

I took it apart and noticed my trigger pin walked out of the hole a bit-the retainer wasnt in the slot-so i popped it back in making sure the retainer was snugin the slot-its one of those one peice ones that the selector lever goes thru the top hole
I lubed up the feed ramp a bit-felt a little rough-then locked and loaded another mag
Lo and behold it ran like a sewing machine afterwards!!!

I realy wasnt checking for groups as much as i was for function,now it passed the break in test-musta ran about 150 rds of wolf after my first mag without a hitch!!(and even bump fired a full mag!:) )

Next its time to take her out for sighting in and grouping @100 (grouping@100) yrds
I'll try and post up the targets when i get it out again

[zteknik]

Sounds great bob! What fcg are you using? Tapco? Zach spezialny? No wonder I haven't heard from you this weekend, we need to catch up sometime, I need you to help me source some dirt cheap type 3 pattern barrel parts for a K.I.S.S. Type 3 pattern tabuk style build
Yup its been a busy weekend!
Believe it or not it is a Tapco g2! I forgot I had a few kicking around my parts box.
I think I'm going to go for the red star arms adjustable trigger setup
I allways liked the set triggers.

Hmm type 3?Sonds like fun!
Did you get that bulgy or was it a hungy demill?
I'm on vacation all week so I'm sure I'll have time to poke around.

I just wish i had the funds to come out there this summer but no dice,got hit with a ton of bills at the last momment.[Rant2]

I'll hit you up tomorow or you can give me a buzz,gonna be playin with the amd kit and see if i can get it done over the week.

[jreifsch80]

Yup its been a busy weekend!
Believe it or not it is a Tapco g2! I forgot I had a few kicking around my parts box.
I think I'm going to go for the red star arms adjustable trigger setup
I allways liked the set triggers.

Hmm type 3?Sonds like fun!
Did you get that bulgy or was it a hungy demill?
I'm on vacation all week so I'm sure I'll have time to poke around.

I just wish i had the funds to come out there this summer but no dice,got hit with a ton of bills at the last momment.[Rant2]

I'll hit you up tomorow or you can give me a buzz,gonna be playin with the amd kit and see if i can get it done over the week.

Well I don't have a type 3 kit at all bob haha that's why I need el cheapo type 3 barrel parts, I'll have someone turn down a cheap take off m72 barrel with my yugo milled front stub and my polish rear, it will be a fun franken scrounge build ;) but I will use virgin polish t3 wood and some loose bulgy t3 parts