Gp1975 Bullpup

[Atrain1]

Is the Century GP1975 Bullpup a good Rifle?

[Daniel_187]

I dont see why not, its an AK with a diffrent stock. I have one of there WSAR-10s and its been good. Trigger is shit though. from my few bullpup encounters the trigger is going to have a long pull. and I think you need some tools to take it down, at least thats how the mini14 was. I would just get an AK with a folding stock IMHO

[Atrain1]

I dont see why not, its an AK with a diffrent stock. I have one of there WSAR-10s and its been good. Trigger is shit though. from my few bullpup encounters the trigger is going to have a long pull. and I think you need some tools to take it down, at least thats how the mini14 was. I would just get an AK with a folding stock IMHOI already have a wasr10 I am trading a 1911 for 0ne so I just wanted to know how good they were

[Atrain1]

Trying to figure out if I got a good deal I traded my Para ordnance 14.45 LDA for a gp1975 Bullpup, any input?

[BPTactical]

Saturday Bath time!
No freakin way I would have done it unless I got some cash in the deal. Like $200.00 at least.
Not a particular fan of Para but........
Your Para retails in the $1100-1300.00 range NIB. Depending on condition used probably $650.00 to 900.00 unfired.
A GP Bullpup is worth maybe $550.00 on a good day NIB.
Used-not a dime over $400.00 and that would have to be LNIB.
Just a GP 1975 with the bonus of an abomonation of a stock, PITA mag changes and a shitbox trigger.
YMMV
Enjoy

[Atrain1]

Saturday Bath time!
No freakin way I would have done it unless I got some cash in the deal. Like $200.00 at least.
Not a particular fan of Para but........
Your Para retails in the $1100-1300.00 range NIB. Depending on condition used probably $650.00 to 900.00 unfired.
A GP Bullpup is worth maybe $550.00 on a good day NIB.
Used-not a dime over $400.00 and that would have to be LNIB.
Just a GP 1975 with the bonus of an abomonation of a stock, PITA mag changes and a shitbox trigger.
YMMV
Enjoy That sucks it was an older 14.45 with the exposed hammer and it was black not ss kind of a two tone and it had the scratches you can see and one about an inch long on the slide, I see the same gun in ss for buy it now on GB for 650

[Atrain1]

http://i1127.photobucket.com/albums/l628/atrain18/para1911lda2.jpgThis what I traded it had the

[Atrain1]

http://i1127.photobucket.com/albums/l628/atrain18/gp1975bullpup.jpg
This what I traded it had the This is what I traded for. I got all the old tapco furniture with it also.

[stevelkinevil]

Ehhhh I love my Gp bullpup. Its not for everyone but I dig the hell outta mine. However I love just about any bullpup YMMV. it is fair to note that the cost of these things has gone up due to the fact they are unavailable and have been for a while. Century still lists them but no one has them and hasn't for a while. The newer ak74 version is available but not the 7.62x39. I have seen them from $450 all the way to $800. Anyway if it makes ya happy who cares.
Here's mine all dolled up with rails, paint job, and optic. [AR15]

[Atrain1]

Ehhhh I love my Gp bullpup. Its not for everyone but I dig the hell outta mine. However I love just about any bullpup YMMV. it is fair to note that the cost of these things has gone up due to the fact they are unavailable and have been for a while. Century still lists them but no one has them and hasn't for a while. The newer ak74 version is available but not the 7.62x39. I have seen them from $450 all the way to $800. Anyway if it makes ya happy who cares.
Here's mine all dolled up with rails, paint job, and optic. [AR15] Nice Rifle my brother just got one that shoots the 5.45x39 the ak74 version from what I understand it tends to tumble more and do more damage oh and it is cheaper to shoot, I will be getting a ak74 soon just for that reason, I have all black furniture from my gp1975 bullpup so I will have a blacked out 74 when I get one.

[Atrain1]

I think I did okay on the trade I like the LDA 1911 but I want a newer LDA without the hammer in SS.

[zteknik]

Mind you its a centry build,but theres been a few good ones that squeked through-if you have to tweak it up a bit its no big deal
Just as long as your happy with it is all that counts
When you do go downrange with it take notice to see if the sights are canted
Let us know how she shoots for ya!

[Atrain1]

Mind you its a centry build,but theres been a few good ones that squeked through-if you have to tweak it up a bit its no big deal
Just as long as your happy with it is all that counts
When you do go downrange with it take notice to see if the sights are canted
Let us know how she shoots for ya! I can tell by looking at them they are I figured I would shoot it see if they are off really bad or I will probably fix it anyway cause that is just the way I am.

[zteknik]

I can tell by looking at them they are I figured I would shoot it see if they are off really bad or I will probably fix it anyway cause that is just the way I am.
If you got rails on it and your going to mount an optic on it you can probably get buy with just maxing the adjustments out on the front sight

And im sure you can probably sweetalk jreifsch80 to help ya uncant the sight ;)

[Atrain1]

If you got rails on it and your going to mount an optic on it you can probably get buy with just maxing the adjustments out on the front sight

And im sure you can probably sweetalk jreifsch80 to help ya uncant the sight ;)I do on my WASR10 it has a red dot this one I would like to keep the iron sights on, that would be great if he could help are they that hard to do?

[stevelkinevil]

Mind you its a centry build,but theres been a few good ones that squeked through-if you have to tweak it up a bit its no big deal
Just as long as your happy with it is all that counts
When you do go downrange with it take notice to see if the sights are canted
Let us know how she shoots for ya!

Yeah to be fair my pup required some tweaking to run right. But I knew that being a Century rifle, just go into it knowing you may need to do a little work. Also be aware if you plan to put a lot of lead downrange at a time, you will need to find an answer for the trigger heat problem, the forend heat issue is easily solved. If you have any questions about that shoot me a PM.

[zteknik]

I do on my WASR10 it has a red dot this one I would like to keep the iron sights on, that would be great if he could help are they that hard to do?
Cool- I might get one of those red dots-i think it'll be badass on my amd once i get rails for it ;0
I'm sure if you can pin Justin down for a few hrs he wont mind-there realy not all that hard to do-you do need to pull the sight so you can slip it back on true and redrill the holes and re pin
He's done a bunch of them so he's gotten his practice in[Tooth]

I never got the chance to play with an ak bullpup-I wonder how one would solve the trigger heat problem other than nomex gloves?
Im sure you can make up some sort of heat sheilds for the insides of the fore end-be interesting to see how its done[Coffee]
Let me know how you made out-I may just have to try this when I move out there.The republik of new york isn't to keen on that stuff now,anyways it'd be more fun out there then here in the gang bang central

[Atrain1]

Cool- I might get one of those red dots-i think it'll be badass on my amd once i get rails for it ;0
I'm sure if you can pin Justin down for a few hrs he wont mind-there realy not all that hard to do-you do need to pull the sight so you can slip it back on true and redrill the holes and re pin
He's done a bunch of them so he's gotten his practice in[Tooth]

I never got the chance to play with an ak bullpup-I wonder how one would solve the trigger heat problem other than nomex gloves?
Im sure you can make up some sort of heat sheilds for the insides of the fore end-be interesting to see how its done[Coffee]
Let me know how you made out-I may just have to try this when I move out there.The republik of new york isn't to keen on that stuff now,anyways it'd be more fun out there then here in the gang bang centralMan I am from California were you have a week or 2 waiting period so you could amagine the look on my face when I got my gun the same day in Colorado.

[zteknik]

Man I am from California were you have a week or 2 waiting period so you could amagine the look on my face when I got my gun the same day in Colorado.
Sofar its not that bad-yet-but you do have to wait 14 days for a pistol,so I know the feeling
I can deal with some of the dumb laws like no bayo lugs and folders after a certain date-like how many times have I used a bayonet shooting?
Most of my stuff is pre ban anyway so I lucked out there

But it sure would be nice to move out to a free state again!! :)
I 'll definitly have a couple of sbr's then-fat chance in New Yuck-even my leo buds cant have one unless there issued from the department they work for

[BPTactical]

Put enough lipstick on a pig and you............................................... still have a pig.

[Atrain1]

Sofar its not that bad-yet-but you do have to wait 14 days for a pistol,so I know the feeling
I can deal with some of the dumb laws like no bayo lugs and folders after a certain date-like how many times have I used a bayonet shooting?
Most of my stuff is pre ban anyway so I lucked out there

But it sure would be nice to move out to a free state again!! :)
I 'll definitly have a couple of sbr's then-fat chance in New Yuck-even my leo buds cant have one unless there issued from the department they work for It is like that in California to, when we walked into a gun store in Colorado we did not know what to buy first we looked like a dear in haedlights after we got over it then we looked like kids on Christmas morning, when we were asking about all the class 3 firearms he said WELCOME TO AMERICA BOYS.

[stevelkinevil]

Put enough lipstick on a pig and you............................................... still have a pig.

LOL I like my dolled up piggy.

[jreifsch80]

I do on my WASR10 it has a red dot this one I would like to keep the iron sights on, that would be great if he could help are they that hard to do?

so need a hand with a canted sight? fortunatly they are easy to fix with a press and reamers to ream the pin holes. pm me and we'll work something out especially since you're in greeley. [Tooth]

and Bob, sounds like the sowijtsky socialistika republiku New York is bad, very bad lol you need to finally get your family out here, especially don't forget your mother, i need to put in some more perogi orders lol

[zteknik]

so need a hand with a canted sight? fortunatly they are easy to fix with a press and reamers to ream the pin holes. pm me and we'll work something out especially since you're in greeley. [Tooth]

and Bob, sounds like the sowijtsky socialistika republiku New York is bad, very bad lol you need to finally get your family out here, especially don't forget your mother, i need to put in some more perogi orders lol
Yea Justin,with the new job I'm about to start i can tweak up my resume a bit and save up some so I can get out there quicker
The future here for the working man looks mighty bleak,unless of course your an illeagal

You need to put in orders??I thought you had Mom on retainer??!![ROFL1]

[jreifsch80]

Yea Justin,with the new job I'm about to start i can tweak up my resume a bit and save up some so I can get out there quicker
The future here for the working man looks mighty bleak,unless of course your an illeagal

You need to put in orders??I thought you had Mom on retainer??!![ROFL1]

It would be selfish of me to snap up all your mom's perogis and not let anyone else have them, plus I need to save room for kieshka haha. By the way mom made a german feast for my wife and I tonight, pan fried beef schnitzels kartoflen mit glaess (potatoes and dumplings) creamy green bean soup. It was a total schmekfest lol

So I got your pm atrain, if you don't work tomorrow me and a guy are going to try his new 74 build at pawnee tomorrow morning, so you could come along if you want.