DFBrews
09-20-2011, 13:01
I took my AR out yesterday and had multiple failure to extracts running XM855 and the final straw was a stuck case. this is the first time that i have ever had issues with this gun. put a 1000+ through it since i have had it and about 700 since I replaced the extractor spring and oring thing. I also ran some of my reloads and did not have any issues at all.
this Upper and barrel is not marked with caliber and this is the first time i have run a large amount of 5.56 through it.
looking at my spent casings some have some really aggressive marks on the case rim from the extractor.
watching some of the videos i took of the gun shooting my brass would sometimes fall really close but most of the time threw it forward like normal.
this Upper and barrel is not marked with caliber and this is the first time i have run a large amount of 5.56 through it.
looking at my spent casings some have some really aggressive marks on the case rim from the extractor.
watching some of the videos i took of the gun shooting my brass would sometimes fall really close but most of the time threw it forward like normal.