Good .300WM factory loads

[mcantar18c]

With all the options out there (and how much they all cost), I'd like to get some input on what loads I should take a look at instead of just buying random boxes and seeing how things go.
What have you guys found to work well in your rifles?

[VNgunfighter]

Federal Gold Medal 190 SMK or Blackhills 190 SMK.

[SA Friday]

What's the end use? That will effect the decision a lot. If just long distance target shooting, the above is good advise. For hunting, it depends on what your shot distance will be.

Let me be the first to say reloading is the way to go. Bullet choice, accuracy, and built for your gun. Just can't beat it.

[mcantar18c]

Federal Gold Medal 190 SMK or Blackhills 190 SMK.
I'll check those out, thanks.


What's the end use? That will effect the decision a lot. If just long distance target shooting, the above is good advise. For hunting, it depends on what your shot distance will be.

Let me be the first to say reloading is the way to go. Bullet choice, accuracy, and built for your gun. Just can't beat it.

This run is just for accuracy, I need to find something my rifle shoots accurately and consistently so I can get everything dialed in and get used to the rifle. Once that's done I'll start looking for loads for long distance targets (would like to be shooting ~1000y). I already know what bullets I'll be using for hunting, but realistically I won't be able to hunt anything with this till at least next year and will worry about developing a load then (and getting a reloading setup).

[GT40MkI]

Don't reinvent the wheel bud :)

Fed GM 190smk's shot alright...

Handload quality and solid prices...
http://www.southwestammunition.com/category_s/64.htm

[GT40MkI]

If/when you do get around to reloading, the rifle loves 4831 and a 208 amax, the gun shot about 23 to 24 moa at 1000 yards with 70gr of 4831sc and would hold about 7" with no wind...

Did you already shoot all 53 rounds?

[mcantar18c]

Thanks for the link man... those look pretty damn nice.
I haven't been able to take it out yet, but I know I'm gonna want more than 53 rounds when I do [AR15] Probably gonna take it up to the mountains with me this weekend.
What are those 53 again? 190s?

[GT40MkI]

Thanks for the link man... those look pretty damn nice.
I haven't been able to take it out yet, but I know I'm gonna want more than 53 rounds when I do [AR15] Probably gonna take it up to the mountains with me this weekend.
What are those 53 again? 190s?

Those 53 are all 210 grain Sierra Match Kings over 70 grains for 4831sc...

I'll do inventory here in a bit and may be able to build a few more out for you...let me see what I can come up with...

[GT40MkI]

I'll load 100 rounds for $108 shipped to you. 50 of the 208gr AMAX's, and 50 more SMK 210s, unless you'd rather have Hornady 208 Match bullets for the other 50. Let me know. Email may be best.

If you want me to load 200 more I'll need to go buy another lb of powder ($25) but have brass and projectiles...I actually have some really nice Berger 210 gr VLD Hunting projectiles that do wonderful things upon impact.

My cost per round is about $1.25-1.50, not counting the time I put into them. I'll weigh and reweigh every charge, and do about 50 rounds in 2 hours.

Hit me up on an email and I can give some more details..if I were you I'd go for the:
50 Hornady Amax 208s
100 Hornady Match 208s
50 Berger Hunting VLD's

I have Federal and Winchester cases, use CCI primers and the H4831SC powder, 70 grains in each works out to 100 rounds per lb nicely.

All 200 for $216 shipped...paypal is cool too. LMK, most place want $2/round for decent stuff.

[geo351]

I'll load 100 rounds for $108 shipped to you. 50 of the 208gr AMAX's, and 50 more SMK 210s, unless you'd rather have Hornady 208 Match bullets for the other 50. Let me know. Email may be best.

If you want me to load 200 more I'll need to go buy another lb of powder ($25) but have brass and projectiles...I actually have some really nice Berger 210 gr VLD Hunting projectiles that do wonderful things upon impact.

My cost per round is about $1.25-1.50, not counting the time I put into them. I'll weigh and reweigh every charge, and do about 50 rounds in 2 hours.

Hit me up on an email and I can give some more details..if I were you I'd go for the:
50 Hornady Amax 208s
100 Hornady Match 208s
50 Berger Hunting VLD's

I have Federal and Winchester cases, use CCI primers and the H4831SC powder, 70 grains in each works out to 100 rounds per lb nicely.

All 200 for $216 shipped...paypal is cool too. LMK, most place want $2/round for decent stuff.
does that go for anyone?? I shoot 300 win rem 700, isnt 200 a little heavy? I do want to go long range but man I would be all over that deal!! i shoot 185-190 grain

[gcrookston]

Federal Gold Medal 190 SMK or Blackhills 190 SMK.

When my source for WCC 190gr Match dried up after 9/11, I began using the Blackhills with good results. For a while, I couldn't get that, either, so began using the Federal with equally good results.

When a friend of mine started reloading, he gave me a couple of boxes of Corbon and a box of Hornady 190gr Match, but my results with this ammo was not as consistent. Though the Hornady performed somewhat better than the Corbon, it wasn't to the level I've come to expect from Blackhills and Federal.

[Alpine]

I'm loading 208-gr AMax with 75-gr of H1000, OAL at 3.60. I'm getting around 2830fps out of a 26" Schneider P5 barrel. If I do my part, It will shoot 1/4-moa with this load.

I'm using Fed brass and GMM primers.