While the down time I got to play with a new toy...........SEEKINS lower

[Skully]

I just got this in yesterday, (kudos to Joe Bob Outfitters, ordered this Friday morning and was in the hands of my fav FFL; Tripe 8 tactical at 1:00pm on Monday and free shipping to boot)

I was reduced down from two complete AR's to a multi upper AR. So I figured I would have a little nicer lower if I am reduced to that.


Pretty dame she is............

http://i394.photobucket.com/albums/pp29/SkullyandRoxy/firearms/SkullysToyMK11.jpg


http://i394.photobucket.com/albums/pp29/SkullyandRoxy/firearms/SkullysToyMK12.jpg


http://i394.photobucket.com/albums/pp29/SkullyandRoxy/firearms/SkullysToyMK13.jpg

Took me 30 minutes to put together, (10 minutes of it was looking to find one of the little pins. I was trying to put it together when my son nudged my arm and the thing went flying across the room)

Very nice quality, this is GENII and has an ambi bolt release so I dont have to add a B.A.D. lever.

Everything went together beautifully with no issues.

Looks good in my book.
http://i394.photobucket.com/albums/pp29/SkullyandRoxy/firearms/SkullysToyMK15.jpg

http://i394.photobucket.com/albums/pp29/SkullyandRoxy/firearms/SkullysToyMK16.jpg

[Sawin]

Hey that looks pretty slick! First I've seen like it.[Punker]

[xjtwo]

Nice, looks good.....

[hghclsswhitetrsh]

Very nice, if ou don't mind my asking how much did it cost?

[asmo]

Interesting lower. I like it.

[LX470]

I have not seen one one of those before...

[Skully]

Very nice, if ou don't mind my asking how much did it cost?


It was $245.95 with free shipping, then the FFL transfer $20.

SEEKINS SP223 Lower (http://www.joeboboutfitters.com/Seekins_Precision_SP223_AR15_Lower_Gen_2_w_Ambi_p/skn-sp%20223%20lower%20gen2.htm)

SEEKINS has some real nice upper Billet receivers as well with like (3) (http://www.joeboboutfitters.com/category_s/19863.htm) different options. Little out of my budget at the moment though, as well as their free float rails.

I believe from what I have read SEEKINS makes Spikes tactical's billet lower and their branded rails.

This lower is real nice and has all of these features built in. I love the curves in it with the trigger guard to the magwell. It is wider at the opening to assist faster mag changes which the pictures just show a beefier front end and you cant quite tell. I also like the extended down magwell with grooves cut in to it to grasp.

[longbow]

Nice!

[Tinelement]

Holy effing shaaaawing!

[hghclsswhitetrsh]

Holy effing shaaaawing!

Yeah that's trigger guard is sick!

[TAR31]

Very nice, planing on getting one of those for my next build.

[Irving]

Dude, you could hang your lucky rabbit's foot from that trigger guard!

[spleify]

Damn that is sick

[Skully]

I have been playing with it and took some better shots with uppers on it. The thing is rock solid and both uppers have absolutely zero wobble. This lower also has a built in tension screw underneath the grip to eliminate wobble on loose uppers. (kind of a pain as you have to remove the grip to do it, glad it is solid.)

Compared to other BILLET lowers out of 7075T6 I really cant believe this was only $250.......................


Here is some more pimping shots;

http://i394.photobucket.com/albums/pp29/SkullyandRoxy/firearms/SkullysToyMK18.jpg

http://i394.photobucket.com/albums/pp29/SkullyandRoxy/firearms/SkullysToyMK17.jpg

http://i394.photobucket.com/albums/pp29/SkullyandRoxy/firearms/SkullysToyMK19.jpg

http://i394.photobucket.com/albums/pp29/SkullyandRoxy/firearms/SkullysToyMK111.jpg

[JoeBobOutfitters.com]

Thanks for the order! Nice looking complete lower! The Seekins lowers have incredibly nice machining and design. They look good in a picture, but they definitely need to be seen in person to appreciate them completely.


It was $245.95 with free shipping, then the FFL transfer $20.

SEEKINS SP223 Lower (http://www.joeboboutfitters.com/Seekins_Precision_SP223_AR15_Lower_Gen_2_w_Ambi_p/skn-sp%20223%20lower%20gen2.htm)

SEEKINS has some real nice upper Billet receivers as well with like (3) (http://www.joeboboutfitters.com/category_s/19863.htm) different options. Little out of my budget at the moment though, as well as their free float rails.

I believe from what I have read SEEKINS makes Spikes tactical's billet lower and their branded rails.

This lower is real nice and has all of these features built in. I love the curves in it with the trigger guard to the magwell. It is wider at the opening to assist faster mag changes which the pictures just show a beefier front end and you cant quite tell. I also like the extended down magwell with grooves cut in to it to grasp.

Spikes' BAR & SAR rails are machined by Seekins Precision for sure. I'm not sure on their billet uppers & lowers however.

[Skully]

Thanks for the order! Nice looking complete lower! The Seekins lowers have incredibly nice machining and design. They look good in a picture, but they definitely need to be seen in person to appreciate them completely.



Spikes' BAR & SAR rails are machined by Seekins Precision for sure. I'm not sure on their billet uppers & lowers however.

That is some intersting follow up? Are you stocking me?? DO you have BOTS that seek out and find mere Mention of your name??????




You should be an "Industry Partner" on this site, a lot of us refer your website and products............................. hell your only in Kansas......... :)

[JoeBobOutfitters.com]

That is some intersting follow up? Are you stocking me?? DO you have BOTS that seek out and find mere Mention of your name??????

You should be an "Industry Partner" on this site, a lot of us refer your website and products............................. hell your only in Kansas......... :)

JoeBob's got some tricks up his sleeves ;). We monitor web traffic (links and name drops) pretty heavily to ensure customer satisfaction, and to answer questions or concerns customers may have.

RE:Becoming an Industry Partner

We're on a large amount of firearm boards. I didn't see a "How to become an IP" thread anywhere. If you send us in the right direction, we could look into it.
[Tooth]

[theGinsue]

JoeBob - We're still actively trying to recover from a major server crash, but hit us up in a week and we'll see about the Industry Partner (IP) thing.

[cofi]

Wow that thing is sweet!!

[DangerLee_Industries]

Nice work Skully looks good.....

[Tim8204]

very cool

[Cman]

That is a good looking lower! I like the trigger gaurd and the mag well.

[rgvt4]

how much did jo bob dun save you this time?

[Skully]

how much did jo bob dun save you this time?

I guess I don't understand the question?

If i wouldnt have bought this lower I would have saved $245 plus transfer fee but instead he took it from me............although I got a nice lower out of the deal. :)

[Scaleguy24]

Can a lower be classified as SEXY?!?! That thing is hot!

[longbow]

I guess I don't understand the question?

If i wouldnt have bought this lower I would have saved $245 plus transfer fee but instead he took it from me............although I got a nice lower out of the deal. :)
Everything that you buy from Joebobs has the savings marked as "Joebob dun saved you" this much. Cool looking lower for sure!

[Skully]

Everything that you buy from Joebobs has the savings marked as "Joebob dun saved you" this much. Cool looking lower for sure!

Oh really? LOL never even noticed that with Joe bob. Rainier Arms had the same price but out of stock.

I guess I will have to look for that in the future when I buy something from them. :D

[mahabali]

That is bad ass!

[NightCat]

omg....I think I found my new favorite Lower!!!!

I want one now!!!