getting barrel drilled for fsb pins

[kilovictor]

Anyone in CO Springs that can do that for me?
Thanks

[kilovictor]

Beuller? Beuller?

[Hoser]

Give Earl Hickman a shout.

[BPTactical]

They need to be match drilled and reamed to the barrel and FSB at the same time. If you are using a used FSB have fun, more aggrevation than a 15.00 sight base is worth.
If Hickman can't get you in take a drive. I can probably turn it around in a couple hours so you only need 1 trip.

[kilovictor]

Thanks for the recommendations guys. Hickman hasn't responded. I wrote him on the 16th.

I'm flexible, but was hoping to use an LMT take-off fsb on my new LMT barrel... how much would either that, or using a fsb one cost from you BP?

[Great-Kazoo]

Thanks for the recommendations guys. Hickman hasn't responded. I wrote him on the 16th.

I'm flexible, but was hoping to use an LMT take-off fsb on my new LMT barrel... how much would either that, or using a fsb one cost from you BP?


If he has not responded the bbl should be boxed and in transit to Bert.

[argonstrom]

Should be in Bert's hands regardless.

[kilovictor]

its boxed up and heading to Bert manana. thx guys

[TriggerHappy]

Bert is gtg. He made me a tool for reloading a while back and it was top notch. Rob also speaks very highly. Deal with confidence.

[kilovictor]

I've heard nothing but good things too.
We need to hit the range again sometime man! You still have that extra set of 308 dies you may want to possibly get rid of?