Looking to swap out my Burris AR332

[dwalker460]

So for some reason, it was thought a good idea to mount the AR332 on the HB 5.45. The 332 is a great optic for quick target acquisition and pinging plates out to 200 or more yards.
My issues with it are that at much over 50yds, say 100yrds, the reticle dot hides the bullseye, the illumination is just "ok", and other small issues. What I am thinking is to put the AR332 on a 16"liteweight upper and get a slightly more powerful scope for the HB upper.

Any recommendations? Not looking for uber expensive glass, just a solid 3x9 or similar that might be a little more useful.

[Great-Kazoo]

So for some reason, it was thought a good idea to mount the AR332 on the HB 5.45. The 332 is a great optic for quick target acquisition and pinging plates out to 200 or more yards.
My issues with it are that at much over 50yds, say 100yrds, the reticle dot hides the bullseye, the illumination is just "ok", and other small issues. What I am thinking is to put the AR332 on a 16"liteweight upper and get a slightly more powerful scope for the HB upper.

Any recommendations? Not looking for uber expensive glass, just a solid 3x9 or similar that might be a little more useful.


I run a fast fire on top of the 332 for need it right now target acquisition. Have not experienced the 332 hiding the bullseye.
Or try this one
http://www.burrisoptics.com/ff30tactical1.html

I have put a Burris LRS 3x-4x with optional 556 reticule on the wife's AR and tossed her red dot. She's like WOW i can see everything , been trying to install a variable power on her ar for some time. I scored the LRS with pepr mount and said fukit. Now she really enjoys ringing them out there.

16" 1/9 stag M4 lefty upper

If you want to come up one day and road test your more than welcome to

[dwalker460]

Thanks for the insight Jim, and I may well take you up on the offer.