View Full Version : How would you do it?
So, how would you get through this glass legally? By that I mean no shooting it ect...
http://imx.doyouknowyourfriend.com/crowdsocial/dailypic/20120807/43313.jpg
DangerLee_Industries
09-27-2012, 00:10
My cummins at about 40 mph....
islandermyk
09-27-2012, 00:10
If it's here in state.. let me know where it's at... and I'll sure figure out how[Coffee]
So, how would you get through this glass legally? By that I mean no shooting it ect...
http://imx.doyouknowyourfriend.com/crowdsocial/dailypic/20120807/43313.jpg
The rules state that you have to use your feet.
If you break it that way you get the money inside.
If MMM allows me to legally keep the cash by breaking their security glasses , I would:
1. Use high molerity solvent such as acetone to melt/dissolve the acrylic.
2. Use high mechanical frequency sound device to shatter the glasses.
:)
Do you think it is a real cash in there?
It is nice to look at.....
DangerLee_Industries
09-27-2012, 00:15
Some how get honey boo boo's mom traveling very fast feet first.
Do you think it is a real cash in there?
It is nice to look at.....
There is three million dollars in there. Sort of.
Only $500 of it is real.
The rest is fake.
If you were to break the glass with your feet as per the rules, you would get the money inside.
I wonder if that is $500 or $3,000,000.
Some how get honey boo boo's mom traveling very fast feet first.
Ha.
Winner. [Awesom]
I'd use my feet to unscrew those large wingnuts on the top.
Flatline
09-27-2012, 00:20
I'd place one of our fire rescue glass punches in my shoe, if that doesn't do it, it can't be done with only your feet.
Also, if you are going to shatter something, you do it as close to the edge as possible, not the middle.
blackford76
09-27-2012, 00:34
I wonder if I can operate a demo saw with my toes?
mcantar18c
09-27-2012, 05:21
I seem to remember a video of an armless guy firing a handgun with his feet. If he can do it...
spittoon
09-27-2012, 05:38
all you need is chuck Norris[Tooth]
Like Ray said the rules were you had to use your feet and supposedly they had a security guard on site at all times, to make sure people followed the rules. If you look closely it's all Canadian money, I guess it was in Vancouver, BC.
http://www.creativecriminals.com/images/3m_securityglass2.jpg
Tinelement
09-27-2012, 06:47
Borrow Robo Cop's boot....
That stuff can take a beating
6wpDEehcIoE
SuperiorDG
09-27-2012, 07:36
Yea I put that stuff on my truck side windows to keep people from doing a smash and grab of my stuff.
BTW. If that is tempered glass in that case you will never break it by just kicking it. You need a fine pointed breaker. If you did break the glass the film would hold it in place.
Work smarter not harder. Husqvarna K960 demo saw.
Det cord and 1" of time fuse...
[Coffee]
Det cord and 1" of time fuse...
[Coffee]
Were you an engineer in the Army? The solution to every problem of removing or opening something always involved the use of Det cord. Not subtle, but always effective. [Coffee]
Solvent.. on the joints connecting it to the metal.
I'd place one of our fire rescue glass punches in my shoe, if that doesn't do it, it can't be done with only your feet.
This was my first thought... Use a glass punch and it should do it- if it's breakable. [Beer]
Det cord and 1" of time fuse...
[Coffee]
1" ..... REALLY?
How do you crimp a blasting cap onto it let alone an initiator. Safe separation time? 1' is more reasonable at 40sec per ft (+/- 10%).
Personally, I would use a water impulse charge so the heat from the det cord doesn't burn the money up. You can always dry money out but can't fix it once it's charred.
1" ..... REALLY?
How do you crimp a blasting cap onto it let alone an initiator. Safe separation time? 1' is more reasonable at 40sec per ft (+/- 10%).
Personally, I would use a water impulse charge so the heat from the det cord doesn't burn the money up. You can always dry money out but can't fix it once it's charred.
I stand corrected...who's the smart ass who put the " and ' on the same key...
jonny450r
09-27-2012, 11:49
I'd place one of our fire rescue glass punches in my shoe, if that doesn't do it, it can't be done with only your feet.
dang it that was my idea[Beer]
I stand corrected...who's the smart ass who put the " and ' on the same key...
Murphy...he's a sneaky fellow.
FireMoth
09-27-2012, 12:09
Use foot... to pump clacker for claymore mine.
And... Monopoly money... YAY!
BushMasterBoy
09-27-2012, 12:58
Cool it with liquid nitrogen to reduce its elastic modulus, then it will shatter.
BPTactical
09-27-2012, 13:01
Trick question.
If it is enclosed in the glass and you do not own it you cannot LEGALLY enter the space.
That would be known as "Breaking and Entering".
Logic flawed, next opponent please[Muaha]
Rucker61
09-27-2012, 13:02
I'd start barefoot, and use my toes to hold a brush to smear glue on the glass, then put a poster of a Mohamed cartoon on both sides. Then just wait.
I'd start barefoot, and use my toes to hold a brush to smear glue on the glass, then put a poster of a Mohamed cartoon on both sides. Then just wait.
WINNER!
Zundfolge
09-27-2012, 13:20
I could gain entry with one foot, my right one ... depress pedal on pickup truck and BANG, profit!
Shoe bomber.
Hold glass cutter with toes cut cut cut.
Use flor jack/jack push under with feet, jack up with feet, wait for something to go crack.
The rules state that you have to use your feet.
If you break it that way you get the money inside.
Oh, ok. That makes perfect sense.
Because someone needing to break through your security glass will only attempt with his/her feet....
[Coffee]
Aloha_Shooter
09-27-2012, 20:26
Wear hob-nailed boots or have one spike inset in the heel of one boot. You want to get all the force concentrated into as small a point as possible. As Flatline suggests, a fire rescue glass punch might do the trick.
DSB OUTDOORS
09-27-2012, 20:38
I'm sorry, but. I saw no rules of engagement in the OP. Just a pic of some money, sort of. I have BIG trucks with booms and heavy chains. We'll split it. Where's it at?? [Coffee]
theGinsue
09-27-2012, 20:50
This was my first thought... Use a glass punch and it should do it- if it's breakable. [Beer]
Everything is breakable under the right conditions. It just looks like 3M has significantly minimized the list of "right conditions".
Clever marketing! Anyone know how much that costs per square foot for office and home window installation?
all you need is chuck Norris[Tooth]
True, because that is Chuck Norris' piggy bank. He's the only one that gets into it whenever he wants.
I thought this glass demo video was pretty funny;
http://youtu.be/F2wdTd8PWk8
rockhound
09-09-2014, 07:24
thats actually pretty impressive,
although if i was going to make a promo video for my glass, i would break out the new coveralls and leave the crotchless ones at home....
thvigil11
09-09-2014, 08:27
Holy Zombie Thread Batman!
HoneyBadger
09-09-2014, 08:53
Holy Zombie Thread Batman!
[zombie1]
Some how get honey boo boo's mom traveling very fast feet first.
That's a conundrum for a physicist....how to accelerate an infinite (m)ass to a sufficiently high velocity without violating Einstein's fear of relatives...
boomerhc9
09-09-2014, 21:01
embed a shard of spark plug ceramic in the heel of your shoe, and give it a couple of good fireman kicks.
Install it on an Iphone and just push it over.
JMBD2112
09-09-2014, 21:35
Install it on an Iphone and just push it over.
hahahaha
JMBD2112
09-09-2014, 21:38
not trying to derail here, but a buddy of mines brother works for brinks and had a windshield out of one of their armored trucks, we probably shot that thing a few hundred times and not once got a round all the way through
hurley842002
09-09-2014, 21:46
not trying to derail here, but a buddy of mines brother works for brinks and had a windshield out of one of their armored trucks, we probably shot that thing a few hundred times and not once got a round all the way through
What were you shooting it with?
JMBD2112
09-09-2014, 21:59
5.56 and .308, a few pistols.....point being, its probably way more difficult to get into than you would think
hghclsswhitetrsh
09-09-2014, 22:18
Betcha a liberal could nag it and guilt it into shattering.
Betcha a liberal could nag it and guilt it into shattering.
With all this global warming, it will probably just melt if you wait long enough.
TheBelly
09-10-2014, 06:41
I stand corrected...who's the smart ass who put the " and ' on the same key...
international standard ICO/CEI 9995-1 did.... that's who put that key right where you didn't want it.
TheBelly
09-10-2014, 06:42
not trying to derail here, but a buddy of mines brother works for brinks and had a windshield out of one of their armored trucks, we probably shot that thing a few hundred times and not once got a round all the way through
I bet I've got something that can make it through in just a few........
HoneyBadger
09-10-2014, 11:24
I bet I've got something that can make it through in just a few........
You guys are approaching this all wrong. Instead of trying to break into it quickly, you just need to get it out of there quickly. Then you can take to it with a glass-cutting saw, guns, dynamite, or whatever.
RblDiver
09-10-2014, 12:23
Get a vet who lost a leg to talk to the people who make prosthetic ones. Get 'em to add some sort of heavy-duty "jaws of life" style clamp. Go up to it, rip it off.
It will cost so much more $ to create that level of velocity at significant mass that I would just give up. [LOL]
That's a conundrum for a physicist....how to accelerate an infinite (m)ass to a sufficiently high velocity without violating Einstein's fear of relatives...
Powered by vBulletin® Version 4.2.3 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.