PDA

View Full Version : P22 barrrel threading


SigsRule
02-03-2008, 19:35
HunterCO, it was nice to meet you today at the Tanner Gun Show. Do you have any idea where to get the threading job on the P22 you showed me? I'm seriously thinking of getting my PPK/S done that way and putting the Spectre on it.
Great-Kazoo
02-03-2008, 21:26
i'm not hunterco but i can tell you the threaded bbl on the P22 comes that way from the factory. the 1/2x28 threads for the can is an adapter from tac innovations.
check with tornadotechnologies.com they do some threading and i believe add ons to bbls for use of a can.
HunterCO
02-03-2008, 22:09
Talk to Alan that is a tough choice.

edit to add: It was nice to meet you also.
HunterCO
02-05-2008, 20:52
I did a little research and AAC has a pic of their cans on a ppk/s. Give them a shout or you could also go to silencertests.com and talk to Silvers or Kevin.

Here is a pic they have on their site.

http://www.advanced-armament.com/products/fullpic.asp?pic=scarab
SigsRule
02-06-2008, 20:21
Thanks, I've already posted the question on silencertalk.com. I'm also researching other avenues.
SigsRule
02-07-2008, 21:52
The SWR folks at Silencertalk.com suggested that any one of the people they recommend for threading could do it. I've emailed a few for info.
SigsRule
02-08-2008, 10:29
FYI, here's the first to respond to my inquiries.

$65 to thread the barrel and $45 for the adapter. A thread protector is $35.00 and shipping is $20.00

Thanks

Chris Lukenbaugh
Aquila Precision Firearms
www.aquilafirearms.com
713.870.9398
Toll Free: 877.7RIFLES
SigsRule
02-10-2008, 21:37
Karl,
Always good advice. In this case, these folks were recommended by SWR as knowing what they're doing.