Gas block screws

Anyone have any suggestions for anything to seal gas block screws? my screws recently came loose.

One of these to peen the screw to block, like the bolts are done on your BCG.. Or any small center punch will do. I use red loctite on them too

http://www.harborfreight.com/media/c...mage_18511.jpg

Loctite

I have used a product called Rocksett with good results.

It is medium strength but with a much higher temp rating than normal loctite.



https://www.midwayusa.com/product/16...-compound-2-oz

Pin the gas block

/close thread