I've heard some say nothing special is needed, others say to use a specific type of grease.
Printable View
I've heard some say nothing special is needed, others say to use a specific type of grease.
I use whatever is on hand. Usually lithium wheel bearing grease.
I use black moly grease.
High temp axle/bearing grease.
^^This ^^Quote:
Originally Posted by 00tec
Tetra Gun Grease
This for anything that slides:
https://s8.postimg.org/k0u7s1ohx/plate.jpg
and Lucas Gun oil for anything that rotates (just because I have had a bottle forever).
https://www.permatex.com/products/lu...e-lubricant-2/
Apply to threads of nut. Tighten to 50 pounds and release 3 times, then final torque. If you have a 7075 receiver and a match grade barrel, getting between 85 and 100 pounds will give you the best assembly.
Just be careful of galvanic response. Some greases will eat the aluminum if moisture is present.
Yep, why I use the Permatex. Seen some nasty stuff after teardowns when Lithium wheel bearing grease was used.Quote:
Originally Posted by Aardvark