Lee Classic Turret Mods

Here are some mods i have done over the years.

I use a Inline fabrication quick change mount. I mounted a small piece of metal angle hole/slotted to hold small bins.
https://i.imgur.com/I2wq3lEl.jpg

Made an auto ejector for the indexing rod. It is a drill bit stop that i drilled and tapped twice. One for a retention stud and the other for the spring stud. With it tapped you can use a small stud to attach a couple of small springs.
https://i.imgur.com/Pzmtqv2l.jpg
https://i.imgur.com/6qhZDFml.jpg

With the the auto ejection there needs to be a feed ramp to channel the cartridge into the bin. I used a thin piece of aluminum to make the ramp.
https://i.imgur.com/lHANGjSl.jpg
https://i.imgur.com/vblMS3Yl.jpg
https://i.imgur.com/LdgzZm1l.jpg

I installed a inspection mirror to confirm that there is powder going into the case. Also Bought a roller handle from inline fab.
https://i.imgur.com/gLrv9yfl.jpg

Took a piece of aluminum and cut it to hold a case bin. it is attached with two small "c" clamp.
https://i.imgur.com/zHz28eEl.jpg
https://i.imgur.com/szvnS1fl.jpg
https://i.imgur.com/EOJuESPl.jpg
https://i.imgur.com/03RS7kVl.jpg

Here is the press set up to run .223
https://i.imgur.com/9YhZIoTl.jpg

Wow, that's some impressive innovation.

And a lot of sharp edges. Lol.

Keeps him from going too fast.

Thanks for sharing! Going to try to incorporate some of those mods to my classic turret

Nice mods, look like they really maximize the productivity

Have you tried the new feed thru shell holder from Lee? Might work good with your set up.

Nice mods, Looks like you can really crank out some rounds with that set up. I just got the inline fab ergo roller handle for my Hornady press and it is very nice no more blisters.