Has anyone who might have a 3D printer attempted to make some dummy rounds? I?m curious how they hold up
Sent from my iPhone using Tapatalk
Printable View
Has anyone who might have a 3D printer attempted to make some dummy rounds? I?m curious how they hold up
Sent from my iPhone using Tapatalk
With my cheap PLA printer, I'd be worried about ripping the rim off.Quote:
Originally Posted by Gunner
See that?s my worry is they just won?t hold up. I really have no experience with 3D printingQuote:
Originally Posted by 00tec
Sent from my iPhone using Tapatalk
Have not tried. PLA might break. But hey a single print will probably cost you 5c.
I'll try printing a 45acp round tomorrow if I can find a file. Should be easy enough to get back out of the glock
This is an application for 3d printing that I would be interested in.
It won?t be perfectly round because of how Printing on the x and y works together so undersize a bit.
Also the rim will be in the first 4-5 layers and should be pretty strong i have printed c clamps and things and rarely get layer separation until extreme abuse if anything do a higher infill % than normal and do a hexagon infill pattern instead of square
Or just 100% infilled and be done. [emoji846]
Sent from my iPhone using Tapatalk
What about printing the bullet portion and using spent brass? I have some that are plastic bullets in brass with a plastic "primer"
I thought that well. Would probly last longerQuote:
Originally Posted by rfizzle
Sent from my iPhone using Tapatalk