Post a picture of your latest purchase

Just got two of the new Ruger/Samson A-TM folding stocks. Overall, it's hard to tell it's not an original 80s vintage stock. They're very nicely done. The folding butt-plate on one doesn't properly lock to the stud on the side of the stock but I think I'll try to remedy that myself rather than send it back. They're ready to drop in the barreled action from your rifle...everything's included and installed. Very easy swap. The hard part is gonna be digging the Mini out of the back of the safe. Wish they were available in blue. I have a blued GB...may put some sort of finish on one of these to match the rifle. A blued one is supposed to be in the works.


https://i.imgur.com/JE6usQJ.jpg

https://i.imgur.com/J7fB126.jpg

https://i.imgur.com/yRtnZUV.jpg

https://i.imgur.com/x5vuwAd.jpg

Quote:

---

Originally Posted by Great-Kazoo

Picked up an early b-day present, to myself Little POF PCC


What caught my eye and why i picked it , was the mag compatibility



https://i.imgur.com/TFPp36Ml.jpg
Yep

10/22 mags , bonus !

---

Looks like fun at 3.25 lbs. How's the trigger, and is it easy to attach and detach a suppressor?

Both of those style stocks are the reason I don't like to have breast pockets on shirts.

Quote:

---

Originally Posted by 3beansalad

I had been using my FiL's Traeger for the last month and it pissed me off so badly due to the huge fluctuations in temp, I had to spend the extra coin on the Recteq. I see a cold weather cover on the Recteq site that's always OOS. Based on my purchase experience I bet I could get one by calling in. Front shelf was OOS online, but they had no problem adding it to my order over the phone.

Burn in took forever to get to temp, let it run well over the suggested hour to compensate. Thanks for the seal link, I fire caulked the smoke stack before installation but hadn't thought of the lid(s.) If only to prevent leakage and keep it shiny!

Sent from my SM-G975U using Tapatalk

---

Harbor Freight has welding blankets (nonflammable). Works for me.

Had a Green Mountain DB for 6+ years. Sturdier build and better temp control. Totally satisfied.

I'm looking at Yoder pellet smokers.

Attachment 85124

Quote:

---

Originally Posted by Hummer

Looks like fun at 3.25 lbs. How's the trigger, and is it easy to attach and detach a suppressor?

---

Just purchased it today, so i haven't fired it yet. The EPD is a "can" that attaches to another mount, that threads on to the bbl. The "EPD" can be removed by hand, the mount, needs a 5/8" wrench to remove. I work at the range this weekend, so probably have some time to road test it. if not there's usually a few shooters who don't mind trying a different gun.

Mr. Fedex was kind enough to drop this package off today. Beeman R7. Now to get it some food.

Attachment 85142

Related note on the smoker discussion: Pit Boss Pro 1100 is holding up well. I did a salmon smoke last weekend during the cold and held at 140? +/- 5 for hours at P4. Mid summer I can hold as low as 155 with about the same variation. Some variation across the broad surface but I mostly make up for that with a water pan over the searing plate, leaving just slight variation from the far left to the far right. Never had an auger jam. The biggest perk is tremendously bigger cook area than most other smokers... but it is obviously less expensive so among other things, you get less "neighbor cred", which I care nothing for.

Back to regularly scheduled programming.

http://www.johnnyego.com/firearms/19...6/gcren04b.jpg

Wow.....really beautiful!