NFA experts: IS this shotgun a SBS?

Quote:

---

Originally Posted by Not_A_Llama

Drop a dowel down the bore with the bolt forward. Make a mark on the dowel at the muzzle.

IIRC, that's the official way.

Shotgun also has to be 26" overall.

This post not to be construed as legal advice.

---

What about if you have a rotating bolt, like a Benelli Nova? That skews the measurement.

Just a hair over 18"

Thanks folks!

http://lh5.ggpht.com/_leflAGmZllI/S6...2011.58.01.jpg

I'd personally still be careful where I bring that one.

Quote:

---

Originally Posted by Stuart

I'd personally still be careful where I bring that one.

---

And why is that?

FYI, this is a home defense shotgun only.

I am a police officer and have an 870 and AR-15s available at work.

Just personally wouldn't want to deal with people being nosy and bothering me about something that is legal, but they are solid enough on the law to know better or not.

I suppose it'd be easy enough to explain where to take the measurement from. At the same time, with enough 18.5" barrel guns out there, maybe no one will even notice anyway. That wasn't supposed to be legal advice at all by the way.

Quote:

---

Originally Posted by Stuart

Just personally wouldn't want to deal with people being nosy and bothering me about something that is legal, but they are solid enough on the law to know better or not.

I suppose it'd be easy enough to explain where to take the measurement from. At the same time, with enough 18.5" barrel guns out there, maybe no one will even notice anyway. That wasn't supposed to be legal advice at all by the way.

---

The only folks that will ever question the length of the barrel will be sponging some asshole off my hardwood floors. :D

And don't worry, I don't look for legal advice on the internet. I just wantedd someoneto refresh my memory on the official way to measure as I haven't deal with C3 stuff in a few years.

Thanks all!

you are fine with that. if you look at a spikes tactical dedicated .22 AR upper the barrel goes in 2 inches into the receiver and it makes it look like a 14.5in .223 upper. even on the short side your barrel goes in far enough.

nothing to worry about.

i am however, not a lawyer![Beer]

Quote:

---

Originally Posted by sniper7

you are fine with that. if you look at a spikes tactical dedicated AR upper the barrel goes in 2 inches into the receiver and it makes it look like a 14.5in .223 upper. even on the short side your barrel goes in far enough.

nothing to worry about.

i am however, not a lawyer![Beer]

---

I thought that was their dedicated .22 upper

Quote:

---

Originally Posted by rhineoshott

What about if you have a rotating bolt, like a Benelli Nova? That skews the measurement.

---

Does it? I don't know the Benelli's specific design, but a rotating bolt's face still typically has a constant setback from the chamber because of the constraints of headspacing. If it looks like an AR or an AK's bolt, there isn't any variation.