Need to borrow air impact

Quote:

---

Originally Posted by opie011

Thanks for the offer guys [Beer]

PM sent

PM sent

it's a 33gal compressor and it's done everything I've needed it to do. I'm using a 50ft hose and have a 25ft one I'll try later. I was hitting the bolt with 140lbs with no luck. I'm sure it's the impact.

---

Gallons mean nothing when it comes to air. What CFM at what PSI is the important issue. I have a Snapon Air hammer that at my last shop was only ok, even with a 60 gallon compressor. The CFM was crap.

Quote:

---

Originally Posted by BushMasterBoy

PB penetrating catalyst is the ultimate. Makes "Liquid Wrench" look like a wussy. It let me take off the rim bolts of a 1953 tractor.

http://www.blastercorporation.com/PB_Blaster.html

---

Poppycock!

Kroil makes PB Blaster whimper and hide in the corner.

Eric, your positive those are right handed threads correct?

if the torch won't allow them to break loose you have an issue. Do you have a cut off tool? Split the nut.

Quote:

---

Originally Posted by DFBrews

If meat mans wont work mine will take lug nuts at 400+ ftlbs off trucks no problem.

---

I assume you have the MG725? That is a nice impact. And I have seen it take of lug nuts off of a truck at 400ftlbs plus.

Quote:

---

Originally Posted by BPTactical

Poppycock!

Kroil makes PB Blaster whimper and hide in the corner.

Eric, your positive those are right handed threads correct?

if the torch won't allow them to break loose you have an issue. Do you have a cut off tool? Split the nut.

---

Positive they're right hand threads cause the driver side was as was all the other ones. Not sure I could cut it off cause the bolt sits under the coil bucket and has a captured nut. Just picked up two impacts and a can of penetrating oil that will hopefully kick this bolts a$$!!

Well I got the bolt to break loose. What a bitch that bolt was...just corroded in between the threads. I cleaned them up and all is good now[Beer]

Thanks meatman for the tools and to everyone who offered[Beer]

Good to hear that you Knocked 'er Loose. [Weight]

Quote:

---

Originally Posted by meatman

Good to hear that you Knocked 'er Loose. [Weight]

---

She should be due pretty soon[Coffee]

Quote:

---

Originally Posted by BPTactical

She should be due pretty soon[Coffee]

---

About a month away[Help]