What type of press do you use?
Printable View
What type of press do you use?
knifekits.com foam, homemade press with plywood, 2 bar clamps and 2 squeeze clampsQuote:
Originally Posted by Ashton
a bit- the photo with it on my leg is really low. I was taking it on/off a lot for testing purposes. I will probably remove the uppers strap so it rides higher. Plus what else you going to do with scrap kydex and 50 cents worth of rivets and chicago screws?Quote:
Originally Posted by tmleadr03
Very Nice Work![Awesom]
Excellent!
thanks--means a lot coming from you.Quote:
Originally Posted by MCarp71
Great looking craftsmanship on that project!
Well, finished the last version. Thought I would share it in case someone else was interested in giving it a try.
Anyway, it will eventually go on a belt with an RTI wheel but I don't have it yet so just using the drop holster for picture purposes.
It's a faster/competition style type.
http://i.imgur.com/wNCYU.jpg
http://i.imgur.com/a7Nz4.jpg
ok-time to move on to a new project....
Looks very nice, cept your mag is backwards...
Quote:
Originally Posted by Hoser
Not if you're right handed on the mag is on the left (wrong) side ;)
you have reach across the body to grab it