New 6.8 Owner

BTW the new Hornady reloading manual is out. 9th edition. And it has 300 Blk out data. FYI!! [Coffee]

I don't have a 300 blackout, so how is that a win?

Welcome to the 6.8 club. It is a smaller but exciting club. I reload and have settled on three loads that my specific rifle combo likes:
95gr Barnes TTSX with Federal brass, AA2200 and CCI 41 primers - hogs (haven't hunted them yet but on paper my rifle likes these and they chrono well and get HUGE reviews on the 68furom)

110gr Hornady boho with Federal brass, H335 or AA2200 and CCI 400 primers for general shooting

115gr Sierra Matchking with Federal brass, H335 and CCI 400 primers for comp

The Speer 110gr pro hunter are also supposed to be really good too. As always you would need to work up what load works best for your weapon. Just have fun!

I got to shoot only about 10 rounds out of it today, WAS AWESOME!!!! Range the 550 gong after 3 shots @25, and 1 @ 100, to make sure scope was on target.

I might be PMing you for some pointers. I would love to purchase some rounds, whats the legality of selling FTF with ammo?

I think the class 7 FFL is required for manufacture and selling of ammo. You may want to talk to a FFL to verify.

thanks. I will talk to an FFL. Sucks you cant buy specific rounds from people who reload.

Now that supplies are loosening up there are a lot of bullets to choose from. Look at Shooters Pro Shop for Nosler bullets, they are the factory outlet for Nosler. You can find blems and overruns at a good price. The Speer 90 tnt is a great bullet as are the Hornady 110 BTHPs and 120 SSTs. Nosler has a new 85 gr. lead free bullet as well. Federal once fired brass is available from LWRCI for $280/1000.

Lots of good info out on 68Forum for this cal. Here are some of my loads that work AWESOME!

Barnes 95gr TTSX
Brass: Federal
Case Trim Length: 1.676
Primer: CCI#41
OAL: 2.285 (max case length for mags)
AA2200
29.5 gr., Avg:2877 fps *** preferred
ACCURACY: .75


Sierra Matchking 115 Hollow Point Boat Tail
Brass: Federal
Case Trim Length: 1.676
Primer: CCI#41
OAL: 2.270 (max case length for mags)
H4198 22.5 Gr., Avg: 2210fps *** preferred
ACCURACY: .75


Hornady 110 Gr. BTHP
Brass: Fed
Case Trim Length: 1.676
Primer: CCI#41
OAL: 2.260
H4198 24.3 Gr. Avg: 2523fps
ACCURACY: .9

As usual, these worked in my weapon (PSA 16" SPC II 1:11) but you should work up to these for safety. I never go for max velocity so there is room in there. And if anyone is interested, I have two boxes of Barnes 85Gr TSX that I am not going to use and will sell. PM me if interested.