https://i.imgur.com/2tXRdwZ.jpg
Found one of those older springfield GI models (not the Mil Spec with the taller sights) to fill my old 1911 shaped hole in the collection. It's neat but it's got me thinking how much I want that damn Dan Wesson A2
Printable View
https://i.imgur.com/2tXRdwZ.jpg
Found one of those older springfield GI models (not the Mil Spec with the taller sights) to fill my old 1911 shaped hole in the collection. It's neat but it's got me thinking how much I want that damn Dan Wesson A2
Gift from Mrs bo.
Perfect service from Dillon. Even down to smiley faces on packages.
https://uploads.tapatalk-cdn.com/201...1a0fdc2d9c.jpg
Nice, I'd like to get a basic GI style 1911.Quote:
Originally Posted by waffles
Was going to get one a couple weeks ago, but I bought a can instead :P
Here is my two barrels that I have. Top is a RRA heavy barrel, weighing in at 2.875 pounds. Below, Faxon lightweight nudging the scales at 1.20
https://i.imgur.com/oNTezWeh.jpg
Attachment 73923
The holster, not the Ruger Single Six. And, technically I didn't purchase the holster, but I did buy the leather, and the dye, and the hardware. Then it was just a case of making them play nice with each other.
Went and visited the fine folks at Mile High Shooting Accessories yesterday afternoon in Erie and bought a Tenebraex ARD w/ a flip cap. Pretty pricey at $121.00 but I didn't care for the extension tube ARD that came with my Vortex Scope. Neat thing is, the Tenebraex screws on to both the scope and the Vortex Ext. Tube.
https://uploads.tapatalk-cdn.com/201...c7d650de9f.jpg
Placed an order this morning for a throw ring for my Vortex Viper PST Gen II 1-6x24 through Optics Planet
https://uploads.tapatalk-cdn.com/201...2fbd3c551.jpeg
Sent from my iPhone using Tapatalk
Pallet Forks for the tractor:
***Corgi OPTIONAL - Not Included***
Attachment 73924
Did you buy a suppressor and bolt action while at MH? Good place to buy from, bad place to walk in with wanting to buy, on your to do list.Quote:
Originally Posted by CoGirl303
hah! I wish!Quote:
Originally Posted by Great-Kazoo
Sent from my iPhone using Tapatalk
https://farm1.staticflickr.com/819/4...199984e9_c.jpg20180320_181542 by ARNEWB, on Flickr
The backbone of my latest project showed up...
Do tell....Quote:
Originally Posted by Grant H.
Blackberry Pi T1000
Close... :DQuote:
Originally Posted by Irving
40mm Precision Ground Rod and 40mm Precision Linear Bearing.Quote:
Originally Posted by Duman
I'm going to attempt to build a turret based big bore reloading press (.50BMG for now, eventually .375Chey - gotta get a rifle first...)
I've already got 2 different .50BMG presses (Lee Kit, and Dillon BFR), but this has intrigued me for a while, and this part of it was cheap on eBay, so why not?
ETA:
Yes, I will do a build thread with details, pictures, and video's. That's a few weeks off at least though.
Post some cad and I can try to do a stress analysis with deflections for fun, provided I can find some of thst non existent free time.
Just won this on Gunbroker.
https://www.ar-15.co/attachment.php?...8&d=1521649166
Attachment 73948
should be here in a few days :)
Figure since I'll have to find a new job, I might be forced into pocket carry and I don't have anything small enough for that.
SWEET!
Let me know if you want to sell those grips.
HA ... the grips are why I paid a little more than I wanted to for it ... now I need to get a nice used/worn brass Tyler T grip to go with it.Quote:
Originally Posted by davsel
Got my dog a new bone
https://uploads.tapatalk-cdn.com/201...19fc88ce20.jpg
Sent from my iPhone using Tapatalk
^^^^^^
Congrats Monky !
Scars are cool ! [rockon]
Love mine.
fookin new RV is killing me softly. Just don't tell my wife what I paid for stupid plastic jack blocks and roll on levelers...
Attachment 73950
Attachment 73951
Attachment 73952
Attachment 73953
Attachment 73954
Attachment 73955
Attachment 73956
Attachment 73957
Attachment 73958
is that at 17 or a 16?Quote:
Originally Posted by Monky
17..Quote:
Originally Posted by izzy
Sent from my iPhone using Tapatalk
What are the light filters for, romance? I'm going to go look up a video of those drive on levelers.
I like your dog!Quote:
Originally Posted by Monky
He has this face as if he's waiting for the OK command. Then run off with it.Quote:
Originally Posted by Fentonite
Quote:
Originally Posted by brutal
You have been assimilated with little hope left....
Quote:
Originally Posted by Great-Kazoo
He can't wait to chew into that handguard, so soft and crunchy like tempura shrimp.
bow chika wow wow...Quote:
Originally Posted by Irving
Actually, just needed the Blue filter (I think).
There are motion sensor LED lights throughout the RV (but apparently not enough as I've ordered more). There's a wall mounted switch that controls one light in the bathroom, and another light that's a motion sensor unit. Instead of just an AC plug in night light, we want to leave the PIR light on auto, but tone it down for use as a night light.
I tried painting the lens, but that look like 70's porno unshaven ass.
Thing is, I have most of that stuff, but 14 year old tech needs to be upgraded.Quote:
Originally Posted by Hummer
Funny, the thing that I probably like the most, next to the 45 AMP dogbone, is the Dominator poo pipe. :-D
Quote:
Originally Posted by brutal
There is no escape from the BORG.
(j/k, I'm vicariously enjoying your journey. Have fun!)
Go live in your RV for 6 months with wife and 3 dogs. You'll get over that shit in a hurry. I did.
[Coffee]
Yeppers. if it works, who cares how old it is. As long as there's no leaks, toilet flushes and the shower works everything else is minor.Quote:
Originally Posted by Bailey Guns
And if that don't work go for 6 yrs with wife and 50lb dog in a 28'.Quote:
Originally Posted by Bailey Guns
The RV will be worn the hell out and you will look forward to tent camping.
We have not even discussed replacing it until a few months ago and it was almost 8 yrs ago we lived in it.
We traded in a 2004 that, except for the shitty underbuilt Lippert frame, had been extremely reliable and was in very good condition. But we only use it about 30 days a Year total and don't put a ton of miles on it.Quote:
Originally Posted by buffalobo
Cheaper to fly to Mexico 4x times, but hard to bring the boat, friends, etc...
Now just have to wait for Brown to drive it up from MS.
Attachment 73974
zingQuote:
Originally Posted by HBARleatherneck
https://uploads.tapatalk-cdn.com/201...fd362a6c8d.jpg
https://uploads.tapatalk-cdn.com/201...7c2f473682.jpg
new ARD and throw lever for the scope.
Sent from my iPhone using Tapatalk
Well FFS...I guess I'll just have to start vetting every employee of every company I ever decide to do business with. I'm sure you do that.Quote:
Originally Posted by HBARleatherneck
ETA: Guess we all should stop buying from anyone or any business that sells HS Precision products, too, because LH worked there for a while. You know...like Cabela's, Brownell's, MidwayUSA, etc...
The Taco got new bones! Not really a “purchase”, since Toyota paid for it. After a couple failed attempts and a class action lawsuit, Toyota replaced the frame on my ‘05 Tacoma. Obviously, a complete disassembly of the truck, so I paid for some things to be done on the cheap while it was apart (clutch, water pump, power steering rack, axles, new shifter,). So far, so good. I expected lots of new creaks and rattles, but it seems better than ever, drives straight, etc.
Attachment 74002
Attachment 74004
Wow...a new frame! You'd think it would be cheaper to give you a new truck. That's great.
No kidding! They billed Toyota over $10k for work on a 13 year-old truck.Quote:
Originally Posted by Bailey Guns
https://i.imgur.com/9Cjhhbe.jpg
edit: The gun, the suppressor is the shops.
Only 5 more months!