Where can I buy a torqe wrench in inch lbs
Printable View
Where can I buy a torqe wrench in inch lbs
http://www.amazon.com/s/?ie=UTF8&key...l_845owgzefd_eQuote:
Originally Posted by soldier-of-the-apocalypse
http://shop.milehighshooting.com/Bor...t-BorkaMG5.htm
I love my Borka Kit
Sears , Harbor Freight , Snap On , Brownells , Midway , Etc. will all have something that will work .
Sportsman's Warehouse has the Fat Wrench - it is ajustable and works a great.
Borka Kit.
I ended up getting the fat wrench at bass pro and they matched cheaper then dirts price of 49.99. It seems nice enough to do the trick. I also just picked up a harris brm-s 6x9 bipod now all I need is a anti cant level. I think I going to get the vortex
Woohoo just got a notification from powder vally that 1500 175gr Sierra match kings are heading my way, I'm stoked now!!!!
very nice... I hope to hear some good news on my end with some 175gr SMKHPBT's through mid-south shooters...Quote:
Originally Posted by soldier-of-the-apocalypse
I had a chance to get her zeroed this weekend but I think my elevation might be a bit high since my turret is on the number 3 line on my scope what do you guys think? I'm running a 20 moa base with badger rings and I zeroed it at 100 yards on the center cross hair with 168smk. I'm supposed to be getting my 175 smks today so I was going to zero it again on one of the upper mil marks.
How much " up " is left above zero ?
im not sure I was hoping someone with a night force could tell me. There are marks on the scope telling how far up your turret is and I'm on number 3 I would guess I'm at least half way up in elevationQuote:
Originally Posted by C Ward
Turn the knob like your dialing elevation and see whats left . Anything 15 mils and above is GTG with 308 .
When the knob gets stiffer is when to stop , the erector is hitting the tube . Forcing it past that will break stuff .
Ill check it out tonight
Ok I only have 11.8 Mils left in elevation
Right about 1K yards.
That's about as far as I want or expect to go any time soon so I guess it's good for now
That should go to 1k ish depending on the load . How much angle is on the scope base ? The only way to recover more usable elevation is to put an angled base on . 20 MOA is pretty standard , depending on how much travel is below zero will tell how much more you need .
Went back and read there was a 20 MOA base on the gun . Make sure the thick side of the base is to the rear , there should be a visible slant with the base compared to the bore line . Where the scope is at is about centered in the travel range and without seeing the gun I'd suspect it is a flat base and not angled .
Save your money. And buy night gorse Schmidt and bender. Etc. buy and use any old hunting scope with solid rep and TRAIN without very high quality ammo the edge a high priced scope will give you will be negated by standard ammo. Until you can shoot well out to five hundred yards don't waste money on mid range glass. Once you break 500 yards then high end can make a diff. Until you do any fairly solid scope will work.
How much do you have budgeted for ammo? Vortex is worthwhile even though all their stuff is Chinese made.
Quote:
Originally Posted by ldmaster
what we have here is a failure to communicate.
I already bought a night force nxs 5.5x22x56 this is one of those threads that has probably progressed futher then it needed to
also im set up to reload but im in the learning stage of long range precision reloading, and not all vortex stuff is Chinese the high end vortex stuff is is Japanese