Post a picture of your latest purchase

Printable View

06-16-2018, 20:27
MrPrena

Quote:

Originally Posted by To Bear Arms

Since we now know you have a chainsaw... may I borrow it?

[LOL]
06-16-2018, 20:34
3beansalad

Torklift 20K. Huge damn pain to install https://uploads.tapatalk-cdn.com/201...f61a57d738.jpg

Sent from my SM-G955U using Tapatalk
06-16-2018, 21:04
rocketman

Took a motorcycle safety course last weekend, got my endorsement on Monday, and then on Tuesday...

https://i.imgur.com/qoYjSFc.jpg

2018 BMW G310R. 313 cc single cylinder engine, 6 speeds, only 350 pounds and a ton of fun. Great bike for a novice to practice on. And believe it or not, MSRP approximately 5000 dollars!
06-17-2018, 06:48
motoboy

Your Beemer looks cool !

Ride safe.

Congrats !
06-17-2018, 08:24
SouthPaw

Early birthday present for myself.

https://s33.postimg.cc/jrnjg3plr/A10...D074_B5342.jpg
06-17-2018, 11:14
TheSparkens

Quote:

Originally Posted by Jer

I lose guns all the time too. Usually tragic boating accidents in the summertime and in the winter it's tragic back country skiing accidents even though I've never skied a day in my life. Good thing they weren't stolen though as I'd probably have to file a police report. Dunno. Not really sure how all of that works I just know I don't own any guns anymore despite my best efforts over the years to acquire many of them. I just can't seem to keep the darn things. *shrugs*

THIS!!
06-18-2018, 21:28
waffles

https://i.imgur.com/qvhyeic.jpg

My ban era tacticool police trade in. Taken in the spirit of the ban era, with poor lighting on a slightly dirty beige carpet. Nostalgia flooding back.
06-19-2018, 05:08
lex137

2 Attachment(s)

Attachment 75129

Attachment 75130
06-19-2018, 09:39
izzy

Is that a sticker that you're holding up to the can or is that actually engraved onto the can?
06-19-2018, 20:29
lex137

Quote:

Originally Posted by izzy

Is that a sticker that you're holding up to the can or is that actually engraved onto the can?

It’s like a cigar wrap that went around the can I bought.
06-19-2018, 21:09
mattiooo

Finally...found the right holster.

https://suburbangunowner.com/wp-cont...6/IMG_0490.jpg
06-19-2018, 21:21
motoboy

Newish CZ 75 SP-01 Phantom with just installed TruGlo TRX Pro sights.

https://i.imgur.com/CJx9nLk.jpg

https://i.imgur.com/eQMlsrc.jpg
06-22-2018, 21:03
3beansalad

WTF happened, it's half gone! https://uploads.tapatalk-cdn.com/201...111fd2c2a0.jpg

Sent from my SM-G955U using Tapatalk
06-22-2018, 22:13
Zundfolge

Quote:

Originally Posted by 3beansalad

WTF happened, it's half gone!

Whiskey is prone to evaporate if you leave the cap off too long. [Coffee]
06-23-2018, 11:53
Squeeze

Couple of new recent additions.

First is the house.

http://i1094.photobucket.com/albums/...psumxvr9rb.jpg

Second, is a demo holster for my Poly 80 G19 build. This is a holster I made that was inspired by the movie "Logan".

http://i1094.photobucket.com/albums/...pso7byy3j2.jpg
06-24-2018, 08:25
Hummer

That's too pretty to wear IWB. Nice work.
06-24-2018, 09:50
Squeeze

Quote:

Originally Posted by Hummer

That's too pretty to wear IWB. Nice work.

Thanks! Yeah, it's an OWB and it works really well. Very happy with the way it turned out.
06-24-2018, 14:30
kwando

Why do you personally chose to carry a 80% over a serialized manufactured glock? I’m not against 80%ers as I have some myself but mine are just loaners for plinking. I guess I’m afraid on malfunctions when I need it, or similar to reloading self defense ammo how that could potentially make you look like the BG.

Awesome looking holster!! Never seen that design before
06-24-2018, 14:41
Squeeze

Quote:

Originally Posted by kwando

Why do you personally chose to carry a 80% over a serialized manufactured glock? I’m not against 80%ers as I have some myself but mine are just loaners for plinking. I guess I’m afraid on malfunctions when I need it, or similar to reloading self defense ammo how that could potentially make you look like the BG.

Awesome looking holster!! Never seen that design before

I did serialize the lower. Also, I know for a fact this Poly 80 is reliable. It runs like a top. I do have a factory G19 that I carry most of the time. This is just a cool conversation piece when I'm on the range. The holster was inspired from the movie "Logan". The blonde-haired villain in the movie had one almost identical to it.
06-24-2018, 14:42
wyome

1 Attachment(s)

Couple of things I picked up from a co-worker/forum member...
Attachment 75188
06-24-2018, 14:54
Grant H.

Quote:

Originally Posted by kwando

Why do you personally chose to carry a 80% over a serialized manufactured glock? I’m not against 80%ers as I have some myself but mine are just loaners for plinking. I guess I’m afraid on malfunctions when I need it, or similar to reloading self defense ammo how that could potentially make you look like the BG.

Awesome looking holster!! Never seen that design before

My P80's have been just as reliable as my original Glocks. My first P80 has over 6k rounds of 9mm through it now (reloads, factory, and +p+ hollowpoints to prove it will run them...)

While I understand the sentiment of worrying about reliability in time of need, I don't understand the paranoia of "This gun has been perfectly reliable through xxxx rounds, but since it wasn't made in a factory, it magically won't work in the one instance where I desperately need it..."

I'm not saying that's the logic you are using, but I see it a lot in the anti-80% world.

As for the legality of it, I've talked to firearms attorneys, LEO, and even the ATF, and no one cares as long as you are legally allowed to own firearms and have a valid CC permit.

When I specifically pushed the question of the lack of a serial number, two things were brought up by the LEO and ATF agents.

1. It's no different than carrying a pre 1968 handgun. Perfectly legal, but no serial number.
2. As long as there WASN'T a serial number, that has been removed (missing material, scratched off, otherwise made unreadable) then there isn't an issue.

I expect I will get more questions about it if I ever have to explain it, but until the laws change, there's no issue.
06-24-2018, 14:55
Grant H.

Quote:

Originally Posted by Squeeze

I did serialize the lower. Also, I know for a fact this Poly 80 is reliable. It runs like a top. I do have a factory G19 that I carry most of the time. This is just a cool conversation piece when I'm on the range. The holster was inspired from the movie "Logan". The blonde-haired villain in the movie had one almost identical to it.

This is the other option.

Make your own serial number up.

This is also beneficial in the interest of if it ever got stolen.
06-24-2018, 16:08
kwando

I guess I never even considered serializing my 80%er. Mine has been reliable as well, and the flip side I've had mass manufactured weapons fail more often than I wanted.
06-25-2018, 08:48
Squeeze

Quote:

Originally Posted by Grant H.

This is the other option.

Make your own serial number up.

This is also beneficial in the interest of if it ever got stolen.

That is primarily the reason I did it.
07-02-2018, 11:22
SouthPaw

Sold my big rig:
https://s33.postimg.cc/3mpgk6tm7/IMG_7307.jpg

And replaced it with this:
https://s33.postimg.cc/ti973csv3/tahoe.jpg

No more car payments for me; at least for awhile.
07-02-2018, 16:12
Great-Kazoo

Quote:

Originally Posted by SouthPaw

Sold my big rig:
https://s33.postimg.cc/3mpgk6tm7/IMG_7307.jpg

And replaced it with this:
https://s33.postimg.cc/ti973csv3/tahoe.jpg

No more car payments for me; at least for awhile.

You get an official member of JACK BAUER CTU fan club, placard on the dash, with it?
07-02-2018, 18:21
brutal

https://cdn.shopify.com/s/files/1/19...g?v=1525816701

Just a cheap one to supplement for upcoming houseboat trip
07-02-2018, 20:56
Doc45

Quote:

Originally Posted by SouthPaw

Sold my big rig:
https://s33.postimg.cc/3mpgk6tm7/IMG_7307.jpg

And replaced it with this:
https://s33.postimg.cc/ti973csv3/tahoe.jpg

No more car payments for me; at least for awhile.

Nice! Mine is a ‘03 Z71 with 134k miles, can’t say enough good things about it. Enjoy!
07-07-2018, 21:22
sako55

1 Attachment(s)

A bunch of purchases.
07-07-2018, 21:24
Irving

What are those pvc pipes on the wall behind the stock?
07-07-2018, 21:30
sako55

They are the bases for my target stands
07-07-2018, 21:40
Irving

I see it now. Nice rifle and can.
07-10-2018, 22:03
brutal

1 Attachment(s)

Attachment 75337
07-10-2018, 23:04
DenverGP

1 Attachment(s)

Actually got it as a gift from a neighbor I did some work for.

https://images.homedepot-static.com/...d1-64_1000.jpg
07-10-2018, 23:06
Irving

Quote:

Originally Posted by brutal

Attachment 75337

Drum brake?

Quote:

Originally Posted by DenverGP

Actually got it as a gift from a neighbor I did some work for.

https://images.homedepot-static.com/...d1-64_1000.jpg

That's a hell of a gift!
07-10-2018, 23:28
DenverGP

Quote:

Originally Posted by Irving

Drum brake?

That was my guess

Quote:

Originally Posted by Irving

That's a hell of a gift!

Yeah, I think I'll owe them a piece of whatever I cook on it. Works out good because I always cook way more than we need.
07-11-2018, 17:55
brutal

Quote:

Originally Posted by Irving

Drum brake?

Yes, boat trailer brakes.

Bought a bearing today too. Somehow I munged a carrier pushing the back side bearing out with the seal I was also replacing. Good thing they're common. It would have been cheaper to go buy a seal puller (I have a cheap insert tool).

P.P. Can't begin to tell you how many trailer bearings I've replaced on the side of the road (other peoples) due to lack of maintenance or improper adjustment.
07-11-2018, 18:31
mattiooo

https://suburbangunowner.com/images/cz-sp-01.jpg
07-13-2018, 00:08
Irving

I bought a trailer. It wasn't even 15 minutes from me parking that a neighbor with a full sized F-250 asked me to transport something with it for him.
https://lh3.googleusercontent.com/1g...=w1628-h917-no
07-14-2018, 05:50
ray1970

I wish I had neighbors like that. Mine would never come ask me something like that knowing they’d be told to f**k off.