May I ask how much?Quote:
Originally Posted by Ridge
Printable View
May I ask how much?Quote:
Originally Posted by Ridge
Got the handguards, grip and stock complete with tube and buffer and spring for $40 on Reddit. The receiver I got for $100 at Tanner.Quote:
Originally Posted by Erni
You did good. I still miss the SP1 I bought in the 80s, probably more than I like anything I have now.Quote:
Originally Posted by Ridge
Did someone say OD? New Furniture here.
http://i.imgur.com/4hVCszP.jpg
New Paintjob here.
http://i.imgur.com/bYPpbif.jpg
And New Pistola here. Not a replacement for the 19, just a supplement. I am loving its size and weight though.
http://i.imgur.com/hWE8EXq.jpg
Quote:
Originally Posted by JohnnyEgo
Thanks. I like natural patterns that can blend in the forest.
Quote:
Originally Posted by thvigil11
Nice, it seems like retro is in. A question, were any of the Vietnam era M16s issued in OD green or were they all black at that time? Have any rifles with olive drab green or brown or other camo furniture been issued by the US military outside of snipers and special OPs?
Burnt lasagna ? Sorry but that is what it looks like to me.......
None the less it was my latest purchase.... They finish it off it one of those pizza style wood fired ovens before serving. So they very top layer of it gets charred was pretty good actually.Quote:
Originally Posted by SideShow Bob
Well I didn't install myself, I will be removing it and reinstalling it when the engine comes out for rebuild.Quote:
Originally Posted by Irving
2000 Tahoe 5.3L. I am going to pull the engine in the next couple of weeks for a rebuild to add a bit more PSI of boost.Quote:
Originally Posted by Duman
Picked up this great older revolver from Rooster1966 on this very forum. 1975 vintage S&W 67 no dash .38Spl. It originally came with a set of Pachmayr Gripper and Altamont magna grips. I had this older set of period correct target grips on hand-they fit me better.
The no dash 66 and 67 briefly had all stainless sights but after a short while following complaints from law enforcement on the difficulty seeing them Smith changed to the red ramp front and black rear prior to other engineering changes. This gun appears to be one that sat around a bit but not shot much. Timing/lockup is spot on. It's a great shooter and will hang around for a long time. Couldn't be happier with the gun or the deal from Rooster. I think I need to get a floral carved Tom Threepersons holster from El Paso Saddlery to top it off lol.
https://i.postimg.cc/CKXL8whV/60CEBC...A29E61991F.jpg
https://uploads.tapatalk-cdn.com/201...f851aa4c2a.jpg
Only 6000 miles on them used to replace my blown out ones. Way better price doing it myself than the dealership who wanted almost 3 grand for the job on just the fronts.
I am going to have to try that game myself - got new coil over struts and shocks - I will not messing with the springs, it is a pre-assembled kit. I will be doing it myself once it gets a bit warmer and have the alignment checked after I do the work.Quote:
Originally Posted by Spdu4ia
Springs aren't difficult.
Looking at those springs kinda reminds me of FarCry New Dawn. lol
I Just finished the game, and i realized how much I miss playing game for a while.
ANYWAYS,,,,
I went to American Furniture Warehouse and bought:
-Mattress and Box Springs for my kids' new bed.
-Downgraded to a smaller bed & frame (use to be a king, but changed to queen).
Will be delivered on Thurs.
(NOTE: Those were suppose to be my SIG MPX Copperhead or 4.5" money. :( )
Stock photos:
https://i.imgur.com/lV8munY.jpg
https://i.imgur.com/skjtqWh.jpg
We went from a California King (whatever that means) to a full, and that was a pretty big change. Especially with pets.
I had to look:
https://sleepopolis.com/wp-content/u...ng-vs-king.png
That's actually good for me. I hang off of a lot of mattresses.
Bed real eastate is dedetermined by number of legs. If it's you (2 legs) and a 100 lb Bouvier (4 legs), you get 1/3 of the bed and they get 2/3. If it's you and a 8lb cat, you STILL only get 1/3 of the bed and they get 2/3. I came to this conclusion after many years of observation and waking up almost ready to fall off the edge.Quote:
Originally Posted by Irving
O2
So what you're saying is you let a pussy push you around?
Those damn cats will make sure to sleep wherever is most uncomfortable for my legs and back. The bed is way too small and tall for the dog to sleep on anymore.
Sounds like you need a new mattress. Have you seen the new carbon footprint free line of air mattressQuote:
Originally Posted by Irving
Going for a hike?
Thankfully get to spend a bit of time in Alaska this summer. Never had any issues with bears the last times I've been backpacking there, would go to bear spray first, but fucked if I didn't want an excuse to buy something in a big bore.
I think a lot of bear spray gets left at the airport when people don't realize they can't take it on the plane. That even goes for bush planes, so I'd say you're extra justified in your purchase.
Camshaft Adjuster Magnet
Wahler OEM Thermostat / Housing / Sensor / Seal 4834 / 272 0415
Castrol 9qt 10W-60
Oil Filter
https://i.imgur.com/j9mDhfK.jpg?1
New windshield for the car car. New wiper blades too, and waxed all the glass. It feels almost new at 2 years old and 34K miles. Threw a little wax on the paint and finished just as it started snowing. Gleaming in defiance.
Midwinter maintenance in the sunshine and blue sky this afternoon.
https://www.ar-15.co/attachment.php?...5&d=1551423413
Attachment 77455
Got it in a trade...
https://i.imgur.com/hk28XD9.jpg
https://i.imgur.com/XFJyjr5.jpg
Quote:
Originally Posted by Bailey Guns
That's a sweet pistol. I was giving one of those a feel yesterday. I'll be interested to hear how you like it and whether it's finicky.
Shot it yesterday. Not finicky at all with a couple different hollow points and ball ammo...about 150 rounds. The downside is I needed to adjust my grip because the left-side thumb safety likes to bite...hard. It's very small, flat and concealable. Probably won't knock the G43 out of the EDC spot any time soon, though.Quote:
Originally Posted by Hummer
$16.70 for this? I can get the same amount of food for half this price at Chipotle, and Chipotle makes better burritos than Dickey's makes BBQ. Who do they think they are?
https://lh3.googleusercontent.com/9L...=w1112-h625-no
Dicky?s sucks. Period. End of discussion.Quote:
Originally Posted by Irving
It didn't used to suck. That is until I spent some time in Kansas City eating better BBQ for like 60% of the price.
Dickeys BBQ? you of all people should have known better.Quote:
Originally Posted by Irving
Quote:
Originally Posted by Bailey Guns
Thanks for the comments. Handling a gun in the store doesn't tell enough about how it will perform when you actually shoot it. I'm interested in a small frame 1911 with a rounded butt because the square butt mini's bite more than I like. For some guys that just means better grip. I'd like something lighter and more discreet than my G27, and the double stack mag release is a bit of a reach for my short thumb.
Quote:
Originally Posted by Irving
That does look desperate. But it can't be as bad as Popeye's. Tried it a couple months ago and it had to be the worst fast food I've ever had. I was in Denver recently and noticed there's a Popeye's every few blocks along east Colfax. No wonder the minorities think they're perpetually victimized.
I actually like Popeye's quite a bit, especially for the price.
I forgot to mention that the sauces at Dickey's was warmer than the beef brisket!
Last out of the microwave? ;)
-John
There's a BBQ joint (or was) up near Loveland or Ft Collins that I really liked. Norby's maybe?