The post whore thread.

Quote:

---

Originally Posted by TheBelly

Use a big c clamp. Done.

---

I wouldn't be able to clamp it from the side or the back, so it would have to be clamped on the front of the table...which I guess I could use and clamp on a long thing board running the length of the table, but that doesn't get the torque that a clamp on the back side of the table would get.

Quote:

---

Originally Posted by jim

I don't advocate anything. Just a way to utilize the area to it's fullest, with out having a shit load of holes here n there.

BIG C ClampS

---

I guess advocating was the wrong word. I am concerned about drilling into the laminate, which is why I am considering alternatives. I'll have a better idea what I've got to work with tomorrow once I cut the laminate and get the bench in its cubby hole.

We done with this Bob Villa shit yet?

Oh no, neighbor Tim. They're just gettin started.....

Hoses, female fittings, shafts, screws, nipple caps...... home improvement is so exciting....

Quote:

---

Originally Posted by Dingo

Oh no, neighbor Tim. They're just gettin started.....

---

Attachment 29225

In for the long haul.

Yea yea yea, quitcher bitchin'!

Oh, guess I'll try to take it back on track and, even though I don't understand...



Bob Dole?

And here, two posts in a row without talking about wood.

Dang, screwed that one up. Oh well. At least I didn't talk about bolts or scr...shit.

Quote:

---

Originally Posted by BuffCyclist

I wouldn't be able to clamp it from the side or the back, so it would have to be clamped on the front of the table...which I guess I could use and clamp on a long thing board running the length of the table, but that doesn't get the torque that a clamp on the back side of the table would get.



I guess advocating was the wrong word. I am concerned about drilling into the laminate, which is why I am considering alternatives. I'll have a better idea what I've got to work with tomorrow once I cut the laminate and get the bench in its cubby hole.

---

Shit can the laminate. You building a suzy home maker or full tilt reloading bench? Hence C Clamping the press until you see what works best for you.
For the 3rd press i cut a small piece of wood and drilled the mount holes in it. To secure it to the wood i used 7/16 t-nuts secured on the bottom. This allowed me to bolt / mount the press using C-Clamps, with the option of removal when not in use.
http://t-nut.com/2-511332-B006YXNU6I...ps_FREE_in_USA
Measure once cut twice;)

If you are hung up on the whole process there's the Reloading forum where you'll get lots of good ideas and direction, Plus look at pics of our benches.

Arr you saying you have wood, screwed some, or need it?

That's acceptable talk for a ho-party..... we could let it slide if it's couched in prostifriendly terms. :-)

I'm all for nipples, tell me more.

Quote:

---

Originally Posted by Dingo

Arr you saying you have wood, screwed some, or need it?

That's acceptable talk for a ho-party..... we could let it slide if it's couched in prostifriendly terms. :-)

---

I gotz wood, Drilled then screwed. Follow the time line. Wood, Drill, Screw. You can always use a "softer" wood but it never really "Measures UP"

Well, I had some free time finally, so I built my bench tonight too!

Check it out: http://www.ar-15.co/threads/87717-Wh...=1#post1166315

Quote:

---

Originally Posted by jim

I gotz wood, Drilled then screwed. Follow the time line. Wood, Drill, Screw. You can always use a "softer" wood but it never really "Measures UP"

---

Sounds messy.... might end up with wood stain all over the floor.

Hello Ho's

I have shit for time, but wanted to try and catch up...got a few pages in and realized that wasn't happening. Busy next few days on top of that....no time thing continues.

Did blow some dough on .223.....1000 rds LC 855 ball. $750 after YOUR UNCLE screwed me on the decent purchase that I was going to experience. New kid at work ordered a reloading station thingy that I'm gonna split the cost on.....and then start learning wtf that's all about. Shit for details on that at this time though.

Later homies..

Peace be with you, along with plenty of hot sex, cold beer, high paychecks and low maintenance in-laws...and all the other stuff that doesn't make the daily grind suck as bad....and shit.

;)

Well..... I have the sex part here. The rest...... not so much.

Quote:

---

Originally Posted by jim

Shit can the laminate. You building a suzy home maker or full tilt reloading bench? Hence C Clamping the press until you see what works best for you.
For the 3rd press i cut a small piece of wood and drilled the mount holes in it. To secure it to the wood i used 7/16 t-nuts secured on the bottom. This allowed me to bolt / mount the press using C-Clamps, with the option of removal when not in use.
http://t-nut.com/2-511332-B006YXNU6I...ps_FREE_in_USA
Measure once cut twice;)

If you are hung up on the whole process there's the Reloading forum where you'll get lots of good ideas and direction, Plus look at pics of our benches.

---

Suzy homemaker is actually exactly what I was going for! Glad you noticed!!!

I actually got the idea for the solid core slab doors from the Reloading Forum. There are also several people who use the laminate counter tops, which is where I got the idea for that. My current bench is basically painted plywood, and its extremely possible to wipe off, which is why I wanted a lacquered or smooth finish on top, which the laminate is perfect for. This is not only a reloading bench, but also a general purpose work bench, that can easily be cleaned. I did think of doing something similar with those t-nuts, but in the end decided to just bolt the press directly to the laminate. I may just bolt it to some plywood for a while until I find the ideal position for it.

Oh, and HoneyBadger and I were discussing building work benches in here AND the reloading forum, we just got more views and replies in this thread, so we cluttered it up.

[Beer]

Quote:

---

Originally Posted by Otterbatcat

Hello Ho's

I have shit for time, but wanted to try and catch up...got a few pages in and realized that wasn't happening. Busy next few days on top of that....no time thing continues.

Did blow some dough on .223.....1000 rds LC 855 ball. $750 after YOUR UNCLE screwed me on the decent purchase that I was going to experience. New kid at work ordered a reloading station thingy that I'm gonna split the cost on.....and then start learning wtf that's all about. Shit for details on that at this time though.

Later homies..

Peace be with you, along with plenty of hot sex, cold beer, high paychecks and low maintenance in-laws...and all the other stuff that doesn't make the daily grind suck as bad....and shit.

;)

---

I'm not sure I understand any part of this post... But I guess that's okay.

A double team effort... Ok, that works. Kinky!

I'm secretly interested in the bench project myself, since mine is a ghetto rigged abortion of plywood screwed into an old dresser.

Quote:

---

Originally Posted by BuffCyclist

Oh, and HoneyBadger and I were discussing building work benches in here AND the reloading forum, we just got more views and replies in this thread, so we cluttered it up.

[Beer]

---

I don't think it's possible to clutter up the post whore thread..

Wow... What the hell did I just read?

Once again it's my Frday....Just might be a range day tomorrow, then perhaps a few suds from high hops.

Hmmmm... Or is that a few suds from High Hops, then go to the range... I'm confused.

Got it... Range first.

Attachment 29229

Hurry up and open!

Not open till 6!!!!! Grrrr

Man, you guys are crazy about Santiago's... what's so great about it?

Quote:

---

Originally Posted by HoneyBadger

Man, you guys are crazy about Santiago's... what's so great about it?

---

Keep in mind WT also likes Big Shitty Burrito[facepalm] Champagne taste and Caviar Dreams he lacks.

Quote:

---

Originally Posted by waxthis

Hmmmm... Or is that a few suds from High Hops, then go to the range... I'm confused.

---

Heading down to Arapaho Meats in louisville for our bacon, steak and pork load out. Then to the Red Rooster in frogmont got breakfast.

I am required to use internet explorer at work.... ugh!

Quote:

---

Originally Posted by Dingo

A double team effort... Ok, that works. Kinky!

I'm secretly interested in the bench project myself, since mine is a ghetto rigged abortion of plywood screwed into an old dresser.

---

Check out the "lets see your reloading bench" and "what did you do in the reloading room today" threads in teh reloading forum. I got ideas for my bench from the former, and posted pics of my bench in the latter. About to go start finishing it up.

Quote:

---

Originally Posted by HoneyBadger

I don't think it's possible to clutter up the post whore thread..

---

No, hence why I didn't give two shits earlier with my posts, especially with posting a link to my pics post in the reloading room thread. Think of this thread as advertising for the rest of the site lol. It definitely is the place for advertising for santiago's and big city burrito [LOL]

Quote:

---

Originally Posted by waxthis

Wow... What the hell did I just read?

---

Agreed. That was a painful post to understand otterbatcat. And i've gotta ask, is an otterbatcat the offspring of an otter and bat mating and screwing a cat, or the offspring of a bat and cat mating with an otter?

Quote:

---

Originally Posted by BuffCyclist

Check out the "lets see your reloading bench" and "what did you do in the reloading room today" threads in teh reloading forum. I got ideas for my bench from the former, and posted pics of my bench in the latter. About to go start finishing it up.



No, hence why I didn't give two shits earlier with my posts, especially with posting a link to my pics post in the reloading room thread. Think of this thread as advertising for the rest of the site lol. It definitely is the place for advertising for santiago's and big city burrito [LOL]



Agreed. That was a painful post to understand otterbatcat. And i've gotta ask, is an otterbatcat the offspring of an otter and bat mating and screwing a cat, or the offspring of a bat and cat mating with an otter?

---

It's the spawn of Tiger Milk drinkers.

Quote:

---

Originally Posted by TheBelly

I am required to use internet explorer at work.... ugh!

---

Yep me too... Enjoy the suck!

Quote:

---

Originally Posted by BuffCyclist

Agreed. That was a painful post to understand otterbatcat. And i've gotta ask, is an otterbatcat the offspring of an otter and bat mating and screwing a cat, or the offspring of a bat and cat mating with an otter?

---

Maybe it was a drunk post? [Dunno]

It's half otter, half bat and half cat. How is that hard to understand... I'm super, super serial....

So..... I guess a thread got deleted somewhere or something, because I just hit 3500 posts for the second time! Wooooohooooo! [WooHoo]

and another day begins with frustration and despair.

Quote:

---

Originally Posted by Mick-Boy

It's half otter, half bat and half cat. How is that hard to understand... I'm super, super serial....

---

american dodgeball association.. of america.

dasani drinking water.

whatever comes to mind at the 30 second mark... posting as fast as I'm allowed.