Yes please!
Printable View
Do we get a pic or not?
Something funky happening with Google Photos. I just uploaded it instead of linking it.
Maybe something fishy is going on with Google... Maybe I'm just touched...
My new Vudoo in MPA Lite chassis
https://i.imgur.com/VvUmSqW.jpg
That is too cool. Cant wait to see it in person.
With my lovely bride working on Christmas, I decided to take my 40X Rimfire family to the range for Christmas.
All 4 suppressed, no plugs needed. TBAC Take-Down, Jet Integral, TBAC 6.5 Ultra 7, Shark 308.
Shot 2-3 MOA sized steel out to 220 yards and testing out some new close range (50 yards) targets to be 100% sure my welds were solid before Saturdays Prone and PRS matches.
Still not sure if the Manners stock will stay. Might end up with another AI chassis or maybe a MPA.
https://i.imgur.com/1BjYdDC.jpg
Took the Vudoo up to the 600 yard range after yesterdays IPSC match. After 6 stages of revo, my hands and brain were tired.
At 405 yards (20.2 mil elevation, 2.7 wind) it shot about a 3-3.5 inch group. Nice and round. Held a touch too much wind and I needed a few clicks more for elevation.
At 615 yards (37.4 elevation, 4.0 wind) I managed about a 10-12 inch group. At least with the 4 that connected. Absolutely no clue where one of the shots went nor do I know which shot out of 5 missed. Even with Charlene spotting, hits on steel and misses in the dirt were impossible to see with the mirage. I hoped painting the targets white would help, but it wasn't enough.
The magnetospeed T-100 strobe didn't work too well with the angled/hinged target and only lit off a few times. No biggie. Next time I will use a 12 inch diamond target on conveyer belt. This "ABC" target is about 12 wide and 18 tall.
https://i.imgur.com/gIQLmha.jpg
https://i.imgur.com/31wGKUM.jpg
Nice shooting Hoser!
We've had ours out to 520. Vudoo was at 4.5" group, 3 shots, 2 off target trying to deal with the erratic wind.
Here's two that we haven't shot yet-
Attachment 76159