The post whore thread.

Well, I took all the parts off the one lower, and put them onto a lower that fits. The only part I can't remove is my angled Magpul trigger guard. I had the CMMG one that came with my lower parts kit, but I mailed it to Belly.

Also, I don't have the detent or spring for the rear bolt thing, so I currently have a piece of electrical tape holding the rear detent together so I can shoulder the rifle. Now I need to look up a video on how to lube everything. I was able to fit the BCG and charging handle in just by looking at the parts and working it out, but I'll watch a video just so I better understand how everything works. I've already got some mags and ammo so once I lube up and get that last detent and spring, and have someone properly torque some stuff down, I"ll be ready to shoot.

Irving, I may have a MagPul trigger guard if you are needing one. If I recall correctly it is a poly one.

Quote:

---

Originally Posted by TheGrey

Hi guys!

---

And a howdy to you.

Quote:

---

Originally Posted by Irving

Well, I took all the parts off the one lower, and put them onto a lower that fits. The only part I can't remove is my angled Magpul trigger guard. I had the CMMG one that came with my lower parts kit, but I mailed it to Belly.

Also, I don't have the detent or spring for the rear bolt thing, so I currently have a piece of electrical tape holding the rear detent together so I can shoulder the rifle. Now I need to look up a video on how to lube everything. I was able to fit the BCG and charging handle in just by looking at the parts and working it out, but I'll watch a video just so I better understand how everything works. I've already got some mags and ammo so once I lube up and get that last detent and spring, and have someone properly torque some stuff down, I"ll be ready to shoot.

---

I have the detent & spring, possible an extra plate. Before you install the rear detent, tap it using a 4-40 tap, with some lube on it. Blow out any residue, install the detent, BUT before the spring goes in cut a few coils off, to match the 4-40 set screw you're using.

How's it going, Bob?

Quote:

---

Originally Posted by TheGrey

How's it going, Bob?

---

I'm cool, real cool............

Quote:

---

Originally Posted by SideShow Bob

Irving, I may have a MagPul trigger guard if you are needing one. If I recall correctly it is a poly one.

---

Thank you, but of all the parts of the gun, I can afford that one. You've given stuff for free to enough shady members of the site already. :p

Quote:

---

Originally Posted by Great-Kazoo

I have the detent & spring, possible an extra plate. Before you install the rear detent, tap it using a 4-40 tap, with some lube on it. Blow out any residue, install the detent, BUT before the spring goes in cut a few coils off, to match the 4-40 set screw you're using.

---

You already tapped that for me. I'll swing by some shop and pick up what I need. Thanks for all the help guys.

Quote:

---

Originally Posted by SideShow Bob

I'm cool, real cool............

---

Good to hear!

Quote:

---

Originally Posted by Irving

Thank you, but of all the parts of the gun, I can afford that one. You've given stuff for free to enough shady members of the site already. :p



You already tapped that for me. I'll swing by some shop and pick up what I need. Thanks for all the help guys.

---

[facepalm]Telling ya, this old timers is catching up i tell ya catc........

Hiya, GK...