What did you do in the shop today?

Quote:

---

Originally Posted by ray1970

Caterpillar. Power side crank. The compressor is an Ariel unit. Not going into that right now.

---

:cool:

Lobbed from my electronic ball and chain.

Quote:

---

Originally Posted by zteknik

Thank you [Flower]
It really looks good all put together.
Sure is a change of pace doing a real stock instead of AK plywood...[Coffee]

---

https://sp1.yimg.com/ib/th?id=HN.608...15429&pid=15.1

Some spring cleaning. Going to do the 2000 round challenge in these.

Not too dirty but has still been awhile since i've cleaned it.
https://farm3.staticflickr.com/2830/...0d786354_b.jpg

https://farm3.staticflickr.com/2880/...2ed38d3e_b.jpg

https://farm8.staticflickr.com/7342/...8cb1d6da_b.jpg

https://farm4.staticflickr.com/3725/...dd83d8f4_b.jpg

And Clean
https://farm3.staticflickr.com/2848/...73d70e1f_b.jpg

P226 Combat

https://farm8.staticflickr.com/7172/...baed1cbd_b.jpg

https://farm3.staticflickr.com/2855/...6cdb9d7b_b.jpg

https://farm8.staticflickr.com/7118/...bbd1a844_b.jpg

And Clean, havent noticed the heat coloring, is that from manufacturing or from firing it?
https://farm4.staticflickr.com/3739/...cee51ba1_b.jpg

https://farm4.staticflickr.com/3750/...55397712_b.jpg

And finally completely tore down my Benchmade Adamas to clean, it was filthy. Sorry no after/clean pictures.

https://farm4.staticflickr.com/3729/...ba9e3a82_b.jpg

https://farm4.staticflickr.com/3694/...e1c86c07_b.jpg

Quote:

---

Originally Posted by TheBelly

I figured out why I was getting really high ES and SD in the rounds for my LMT. That's all I've done, really, in the last month.

---

What was the issue? Curious as I have the same gun with the 16" 308 barrel.

Quote:

---

Originally Posted by zteknik

Thank you [Flower]
It really looks good all put together.
Sure is a change of pace doing a real stock instead of AK plywood...[Coffee]

---

Very nice work Bobby!

Quote:

---

Originally Posted by HoneyBadger

Very nice work Bobby!

---

Thanks Dave :)
Now I want to get me one of them lever guns..[facepalm]

Quote:

---

Originally Posted by duke_39a

What was the issue? Curious as I have the same gun with the 16" 308 barrel.

---

Neck tension and mis-matched internal case capacity.

Today I figured out that even though the max OAL of the PMag is 2.810", the max OAL for my particular bullet/barrel combo is 2.846". So much for loading off the lands. I mean, who cuts a chamber like that? LMT does, apparently. I guess I'm going to have to call them and figure out a solution.

Installed a brass nock rest on daughter's bow, and rehandled the same shovel, TWICE. Then set up the tent and camped in the back yard. Oh yeah, I dug out EVERY shrub around my side yards and some of the front yard.